journal article·2003-02

Measurement of the lattice misfit of the nickel-base superalloy SC16 by high-energy synchrotron radiation

G. Bruno, G. Schumacher, H. Cavalcanti Pinto, C. Schulze

Publisher page

Abstract

High-energy, high-resolution synchrotron radiation diffraction was successfully used to measure the lattice misfit in the single-crystal nickel-base superalloy SC16. A three-peak model, one belonging to the precipitate phase γ′ and two to the matrix γ, was used to fit the diffraction peaks. Room-temperature (RT) contour plots and a temperature scan up to 1170 K revealed that the misfit evolves together with the measured thermal expansion difference between the γ and γ′ phases. This suggests that the origin of the misfit lies in the different thermal expansion coefficient of the two phases. The misfit was found to be positive at RT and to evolve toward negative values as the temperature increases.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Metallurgical and Alloy Processes

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (24)

Show source-provided references
1. ASM Standards of Metals, ASM, Metals Park, OH, 1993, vol. 9.
2. N.S. Stoloff: Int. Mater. Rev., 1989, vol. 34, pp. 153–83.10.1179/imr.1989.34.1.153 ↗
3. A. Fredholm and J.L. Strudel: Proc. 5th Int. Symp. on Superalloys, TMS-AIME, Warrendale, PA, 1984, pp. 211–20.
4. G. Schumacher, W. Miekeley, W. Chen, R.P. Wahi, G. Frohberg, and H. Wever: Z. Metallkd., 1998, vol 89, pp. 661–68.
5. U. Brückner, A. Epishin, T. Link, and W. Schuler: Proc. ICRS5, 1997, Lynköping, Sweden, pp. 823–28.
6. G. Frohberg, R.P. Wahi, H. Wever, W. Miekeley, W. Chen, and G. Schumacher: Abschlußbericht-Sonderforschungsbereich 339, Teilprojekt B8, Technical University of Berlin, 1997.
7. A. Müller: Ph.D. Thesis, TU Berlin, Berlin, 1995.
8. A. Müller, T. Gnäupel-Herold, and W. Reimers: Phys. Status Solidi., 1997, vol. 159, pp. 375–96.10.1002/1521-396X(199702)159:2<375::AID-PSSA375>3.0.CO;2-G ↗
9. R. Völkl, U. Glatzel, and M. Feller-Kniepmeier: Acta Mater., 1998, vol. 46, pp. 4395–404.10.1016/S1359-6454(98)00085-8 ↗
10. U. Brückner, A. Epishin, and G. Nolze: Scripta Mater., 1997, vol. 36, pp. 1279–82.10.1016/S1359-6462(97)00028-6 ↗
11. T. Malow, J. Zhu, and R.P. Wahi: Z. Metallkd., 1994 vol. 85, pp. 9–19.
12. R. Bouchard, D. Hupfeld, T. Lippmann, H.B. Neumann, H.F. Poulsen, U. Rütt, J.R. Schneider, J. Süssenbach, and M. von Zimmermann: J. Synchr. Rad., 1998, vol. 5, pp. 90–101.10.1107/S090904959701457X ↗
13. U. Rütt, H.B. Neumann, H.F. Poulsen, and J.R. Schneider: J. Appl. Cryst., 1995, vol. 28, pp. 729–37.10.1107/S0021889895005516 ↗
14. G. Lorenz, R.B. Neder, J. Marxreiter, F. Frey, and J. Schneider: J. Appl. Cryst., 1993, vol. 26, pp. 632–35.10.1107/S0021889893002596 ↗
15. U. Glatzel and A. Müller: Proc. 15th Risø Int. Symp. on Materials Science, Roskilde, Denmark, 1994, pp. 319–24.
16. L. Müller, T. Link, and M. Feller-Kniepmeier: Scripta Metall. Mater., 1992, vol. 26, pp. 1297–302.10.1016/0956-716X(92)90580-8 ↗
17. H.A. Kuhn, H. Biermann, T. Ungar, and H. Mughrabi: Acta Metall. Mater., 1991, vol. 39, pp. 2783–94.10.1016/0956-7151(91)90095-I ↗
18. A. Royer, P. Bastie, D. Bellet, and J.L. Strudel: Phil. Mag. A, 1995, vol. 72, pp. 669–89.10.1080/01418619508243792 ↗
19. L. Müller, U. Glatzel, and M. Feller-Kniepmeier: Acta Metall. Mater., 1993, vol. 41, pp. 3401–11.10.1016/0956-7151(93)90220-M ↗
20. T. Gnäupel-Herold: Ph.D. Thesis, Berlin, Technical University of Berlin, 1996.
21. R. Gilles, D. Mukherji, P. Strunz, S. Lieske, A. Wiedenmann, and R.P. Wahi: Scripta Mater., 1998 vol. 39, pp. 715–21.10.1016/S1359-6462(98)00178-X ↗
22. G. Bruno, H. Pinto, P. Strunz, and M. Wilhelm: unpublished research.
23. G.E. Fuchs: Mater. Sci. Eng. A, 2001, vol. 300, pp. 52–6010.1016/S0921-5093(00)01776-7 ↗
24. A. Royer, P. Bastie, and M. Veron: Acta Mater., 1998, vol. 46, pp. 5357–68.10.1016/S1359-6454(98)00206-7 ↗