journal article·2011-08Open access

Effect of Nb Microalloying and Hot Rolling on Microstructure and Properties of Ultrathin Cast Strip Steels Produced by the CASTRIP® Process

Kelvin Y. Xie, Lan Yao, Chen Zhu, Julie M. Cairney, Chris R. Killmore, Frank J. Barbaro, James G. Williams, Simon P. Ringer

Abstract

The microstructure and corresponding tensile properties of both plain and Nb-microalloyed grades of ultrathin cast strip (UCS) low alloy steel produced using the CASTRIP ® process were studied. Both as-cast and hot-rolled strip cast steels with various levels of Nb microalloying were manufactured and investigated in this study. Hot rolling had little effect on the yield strength of Nb microalloyed UCS specimens for a given chemical composition, but resulted in a slightly finer microstructure. The effect of Nb microalloying was significant, and this is attributable to the promotion of finer, tougher austenite transformation products such as bainite and acicular ferrite at the expense of large polygonal ferrite grains. A fine dispersion of Nb solute clusters was observed in all Nb-containing steels following hot rolling, and it is suggested that this also contributes to the observed strengthening.
Source: openalex_inverted_index · Quality: baseline

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (31)

Show source-provided references
1. F.A. Burgmann, Y. Xie, J.M. Cairney, S.P. Ringer, C.R. Killmore, F.J. Barbaro, and J.G. Williams: Mater. Forum, 2008, vol. 32, pp. 9–12.
2. C.R. Killmore, H. Creely, A. Phillips, H.R. Kaul, P.C. Campbell, M. Schueren, J.G. Williams, and W.N. Blejde: Development of Ultra-Thin Cast Strip Products by the CASTRIP Process, AISTech, Indianapolis, IN, 2007.
3. C.R. Killmore, H.R. Kaul, J.R. Burg, K.R. Carpenter, J.G. Williams, D.G. Edelman, P.C. Campbell, and W.N. Blejde: 3rd Int. Conf. on ThermoMechanical Processing of Steels, AIM, Padova, Italy, 2008.
4. A. Bakkaloglu: Mater. Lett., 2002, vol. 56, pp. 263–72.10.1016/S0167-577X(02)00453-6 ↗
5. C.S. Chiou, J.R. Yang, and C.Y. Huang: Mater. Chem. Phys., 2001, vol. 69, pp. 113–24.10.1016/S0254-0584(00)00379-5 ↗
6. R.H. Larn and J.R. Yang: Mater. Sci. Eng. A, 1999, vol. 264, pp. 139–50.10.1016/S0921-5093(98)01085-5 ↗
7. R.H. Larn and J.R. Yang: Mater. Sci. Eng. A, 2000, vol. 278, pp. 278–91.10.1016/S0921-5093(99)00597-3 ↗
8. C.H. Lee, H.K.D.H. Bhadeshia, and H.C. Lee: Mater. Sci. Eng. A, 2003, vol. 360, pp. 249–57.10.1016/S0921-5093(03)00477-5 ↗
9. R.D.K. Misra, H. Nathani, J. Hartmann, and F. Siciliano: Mater. Sci. Eng. A, 2005, vol. 394, pp. 339–52.10.1016/j.msea.2004.11.041 ↗
10. C.P. Reip, S. Shanmugam, and R.D.K. Misra: Mater. Sci. Eng. A, 2006, vol. 424, pp. 307–17.10.1016/j.msea.2006.03.026 ↗
11. S. Shanmugam, R.D.K. Misra, J. Hartmann, and S.G. Jansto: Mater. Sci. Eng. A, 2006, vol. 441, pp. 215–29.10.1016/j.msea.2006.08.017 ↗
12. S. Shanmugam, R.D.K. Misra, T. Mannering, D. Panda, and S.G. Jansto: Mater. Sci. Eng. A, 2006, vol. 437, pp. 436–45.10.1016/j.msea.2006.08.007 ↗
13. S. Shanmugam, N.K. Ramisetti, R.D.K. Misra, J. Hartmann, and S.G. Jansto: Mater. Sci. Eng. A, 2008, vol. 478, pp. 26–37.10.1016/j.msea.2007.06.003 ↗
14. S. Shanmugam, N.K. Ramisetti, R.D.K. Misra, T. Mannering, D. Panda, and S.G. Jansto: Mater. Sci. Eng. A, 2007, vols. 460–461, pp. 335–43.10.1016/j.msea.2007.01.054 ↗
15. J. Strid: Ph.D. Thesis, University of Technology, Luleå, 1984, pp. 5–14.
16. A.J. DeArdo, J.M. Gray, and L. Meyer: Niobium, TMS-AIME, Warrendale, PA, 1981.
17. M.K. Miller, A. Cerezo, M.G. Hetherington, and G.D. Smith: Atom Probe Field Ion Microscopy, Oxford Science Publications, Oxford, United Kingdom, 1996, pp. 476–83.10.1093/oso/9780198513872.005.0001 ↗
18. D.B. Williams and B.C. Carter: Transmission Electron Microscopy, Springer, New York, NY, 1996, pp. 9–10.10.1007/978-1-4757-2519-3 ↗
19. B. Gault, M.P. Moody, D.W. Saxey, J.M. Cairney, Z. Liu, R.K. Zheng, R.K.W. Marceau, P.V. Liddicoat, L.T. Stephenson, and S.P. Ringer: Frontiers in Materials Research, Springer, Berlin, 2008, vol. 10, pp. 187–216.10.1007/978-3-540-77968-1_15 ↗
20. B. Gault, M.P. Moody, F. de Geuser, G. Tsafnat, A. La Fontaine, L.T. Stephenson, D. Haley, and S.P. Ringer: J. Appl. Phys., 2009, vol. 105, pp. 0349130–39.10.1063/1.3068197 ↗
21. F.J. Barbaro, P. Krauklis, and K.E. Easterling: Mater. Sci. Technol., 1989, vol. 5, pp. 1057–68.10.1179/mst.1989.5.11.1057 ↗
22. H.K.D.H. Bhadeshia and R.W.K. Honeycombe: Acicular Ferrite, Butterworh-Heinemann, Oxford, United Kingdom, 2006.
23. Z.-H. Zhang, Y.-N. Liu, X.-K. Liang, and Y. She: Mater. Sci. Eng. A, 2008, vol. 474, pp. 254–60.10.1016/j.msea.2007.04.041 ↗
24. T.M. Hoogendoorn and M.J. Spanraft: Proc. Conf. on Microalloying, Union Carbide Corporation, New York, 1977, vol. 75, pp. 75–85.
25. J. Strid and K.E. Easterling: Acta Metall., 1985, vol. 33, pp. 2057–74.10.1016/0001-6160(85)90129-4 ↗
26. Y.-W. Wang, F. Chun, F.-Y. Xu, B.-Z. Bai, and H.-S. Fang: J. Iron Steel Res. Int., 2010, vol. 17, pp. 49–53.10.1016/S1006-706X(10)60044-1 ↗
27. Q. Yu, Z. Wang, X. Liu, and G. GWang: Mater. Sci. Eng. A, 2004, vol. 379, pp. 384–90.10.1016/j.msea.2004.03.022 ↗
28. M. Enomoto, N. Nojiri, and Y. Sato: Mater. Trans., JIM, 1994, vol. 35, pp. 859–67.10.2320/matertrans1989.35.859 ↗
29. S.P. Ringer: Mater. Sci. Forum, 2006, vols. 519–521, pp. 25–34.10.4028/www.scientific.net/MSF.519-521.25 ↗
30. S.P. Ringer, S.K. Caraher, and I.J. Polmear: Scripta Mater., 1998, vol. 39, pp. 1559–67.10.1016/S1359-6462(98)00364-9 ↗
31. S.P. Ringer, K. Hono, T. Sakurai, and I.J. Polmear: Scripta Mater., 1997, vol. 36, pp. 517–21.10.1016/S1359-6462(96)00415-0 ↗