journal article·2007-06

The Effect of Particle Shape on the Sintering of Aluminum

Z.Y. Liu, T.B. Sercombe, G.B. Schaffer

Publisher page

Abstract

The effect of particle size and shape on the sintering response of aluminum powder has been examined. Spherical 3-, 5-, and 15-pm powders and irregularly shaped 6-, 7-, and 15-pm powders from two manufacturers were mixed with 4 wt pet Sri, poured into a crucible, and sintered for 2 hours under argon at 620 degrees C. The particle shape appears to be a critical characteristic governing the sintering characteristics. The particle size and size distribution, the tap density, the oxide film thickness, the surface chemistry, and the impurity concentration had little influence. The irregular particles sintered to a final density of 88 to 91 pet, whereas the spherical particles reached a density of only 65 to 73 pet. It is suggested that the differential thermal expansion between the aluminum particle and its oxide film may cause the oxide to fracture and that the fracture characteristics are different between the two powder morphologies.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloys Composites Properties · Advanced ceramic materials synthesis · Bauxite Residue and Utilization

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (15)

Show source-provided references
1. C. Lall: Int. J. Powder Metall., 1991, 27: 315–18
2. L.S. Darken, R.W. Gurry: Physical Chemistry of Metals, McGraw-Hill, New York, NY, 1953
3. S.W. Ip, M. Kucharski, J.M. Toguri: J. Mater. Sci. Lett., 1993, 12: 1699–70210.1007/BF00418836 ↗
4. Y. Liu, Z. He, G. Dong, Q. Li: J. Mater. Sci. Lett., 1992, 11: 896–9810.1007/BF00730500 ↗
5. D.T. Livey and P. Murray: Paper presented at the 2nd Plansee Seminar, Reutte/Tirol, 1955
6. J.-G. Li: Ceram. Int., 1994, 20: 391–41210.1016/0272-8842(94)90027-2 ↗
7. Z.A. Munir: J. Mater. Sci., 1979, 17: 2733–4010.1007/BF00610647 ↗
8. Z.A. Munir: Powder Metall., 1981, 24: 177–8010.1179/pom.1981.24.4.177 ↗
9. R. Lumley, T.B. Sercombe, G.B. Schaffer: Metall. Mater. Trans. A, 1999, 30A: 457–6310.1007/s11661-999-0335-y ↗
10. T. Pieczonka, T. Schubert, S. Baunack, and B. Kieback: Paper presented at Sintering 05, Grenoble, France, 2005
11. G.B. Schaffer, B.J. Hall, S.J. Bonner, S.H. Huo, T.B. Sercombe: Acta Mater., 2006, 54: 131–38
12. G.B. Schaffer, B.J. Hall: Metall. Mater. Trans. A, 2002, 33A: 3279–8410.1007/s11661-002-0314-z ↗
13. I. E. Anderson, J.C. Foley: Surf. Interface Analysis, 2001, 31: 599–60810.1002/sia.1087 ↗
14. Alloy Phase Diagrams, ASM Handbook, ASM International, Materials Park, OH, 1992, vol. 3
15. C.A. Harper: Handbook of Ceramics, Glasses and Diamond, McGraw-Hill, New York, NY, 2001