Effect of B, Zr, and C on Hot Tearing of a Directionally Solidified Nickel-Based Superalloy
Source abstract
Abstract
The effect of the minor elements B, Zr, and C on the castability of a Nickel-based γ′-strengthened superalloy has been investigated. Tube-like specimens were prepared by directional solidification where the rigid ceramic core leads to hoop stresses and grain boundary cracking. It was found that an important improvement in castability can be achieved by adjusting the minor elemental composition. Too low C (≤0.15 pct) and too high B and Zr contents (≥0.05 pct) lead to material that is very prone to solidification cracking and should be avoided. The results cannot be rationalized on the basis of the current models for solidification cracking. Instead, pronounced hot tearing is observed to occur at high amounts of γ/γ′-eutectic and high Zr contents. The critical film stage where dendrites at the end of solidification do not touch and are separated by thin liquid films must be avoided. How Zr promotes the film stage will be discussed in the paper.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Metallurgy and Material Forming
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (57)
Show source-provided references
1. R. Reed: The superalloys, 1st ed., Cambridge University Press, Cambridge, 200610.1017/CBO9780511541285 ↗
2. F.L. Versnyder and M.E. Shank: Mater. Sci. Eng., 1970, vol. 6, pp. 213-24710.1016/0025-5416(70)90050-9 ↗
3. J. Rösler, M. Konter and C. Tönnes: Superalloys 1996, TMS, Warrendale, 1996, pp. 515-522
4. K. Heck, J.R. Blackford and R.F. Singer: Mater. Sci. Technol., 1999, vol. 15, pp. 213-22010.1179/026708399101505617 ↗
5. Y. Zhou, A. Volek and R.F. Singer: J. Mater. Res., 2006, vol. 21, pp. 2361-237010.1557/jmr.2006.0284 ↗
6. G.K. Sigworth: AFS Trans., 1996, vol. 155, pp. 1053-1062
7. D.G. Eskin and L. Katgerman: Metall. Mater. Trans. A, 2007, vol. 38, pp. 1511-151910.1007/s11661-007-9169-7 ↗
8. W.S. Pellini: Foundry, 1952, vol. 80, pp. 124-199
9. M. Rappaz, J.-M. Drezet and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30, pp. 449-45510.1007/s11661-999-0334-z ↗
10. R.T. Holt and W. Wallace: Int. Met. Rev., 1976, vol. 21, pp. 1-2410.1179/imr.1976.21.1.1 ↗
11. M.C. Flemings: Solidification processing, Mcgraw-Hill College, New York, 1974
12. T.W. Clyne and G.J. Davies: Br. Foundrymen, 1981, vol. 74, pp. 65-73
13. T.W. Clyne, M. Wolf and W. Kurz: Metal. Trans. B, 1982, vol. 13, pp. 259-26610.1007/BF02664583 ↗
14. J. Zhang and R.F. Singer: Acta Mater., 2002, vol. 50, pp. 1869-187910.1016/S1359-6454(02)00042-3 ↗
15. J.C. Borland: Br. Weld. J., 1960, vol. 7, pp. 508-512
16. Y. Zhu, J.F. Radavich, Z. Zheng, X. Ning, L. Lou, X. Xie, C. Shi: Superalloys 2000, TMS, Warrendale, 2000, pp. 329-33910.7449/2000/Superalloys_2000_329_339 ↗
17. K. Harris, G.L. Erickson and R.E. Schwer: Superalloys, TMS, Warrendale, 1984, pp. 221-23010.7449/1984/Superalloys_1984_221_230 ↗
18. W. Esser, U. Paul, and S. Piegert, U.S. Patent 20130136649, filled 13 Nov 2012, and issued 30 May 2013
19. Y. Zhu, S. Zhang, T. Zhang, J. Zhang, Z. Hu, X. Xie, C. Shi: Superalloys, TMS, Warrendale, 1992, pp. 145-154
20. D.L. Sponseller: Superalloys, TMS, Warrendale, 1996, pp. 259-270
21. A. Heckl, R. Rettig, S. Cenanovic, M. Göken and R.F. Singer: J. Cryst. Growth, 2010, vol. 312, pp. 2137-214410.1016/j.jcrysgro.2010.03.041 ↗
22. J. Zhang and R.F. Singer: Z. Metallkd., 2002, vol. 93, pp. 806-81110.3139/146.020806 ↗
23. J. Zhang and R.F. Singer: Metall. Mater. Trans. A, 2004, vol. 35, pp. 1337-134210.1007/s11661-004-0308-0 ↗
24. C.S. Smith: Trans. TMS-AIME, 1948, vol. 175, pp. 15-51
25. M. Rappaz, A. Jacot and W.J. Boettinger: Metall. Mater. Trans. A, 2003, vol. 34, pp. 467-47910.1007/s11661-003-0083-3 ↗
26. M.M. Franke, M. Hilbinger, A. Heckl and R.F. Singer: Adv. Mater. Res., 2011, vol. 278, pp. 156-16110.4028/www.scientific.net/AMR.278.156 ↗
27. M.M. Franke, R.F. Singer and I. Steinbach: Mod. Sim. Mater. Sci. Eng., 2014, vol. 22, pp. 1-910.1088/0965-0393/22/2/025026 ↗
28. C.S. Wukusick, T. Tom and L Buchakjian Jr, U.S. Patent 4169742, filled October 17, 1977, and issued October 2, 1979
29. J. Zhang and R.F. Singer: Metall. Mater. Trans. A, 2004, vol. 35, pp. 939-94610.1007/s11661-004-0018-7 ↗
30. E. Tzimas and A. Zavaliangos: J. Mater. Sci., 2000, vol. 35, pp. 5319-532910.1023/A:1004890711322 ↗
31. Y. Zhou, A. Volek and R.F. Singer: Metall. Mater. Trans. A, 2005, vol. 36, pp. 651-65610.1007/s11661-005-0181-5 ↗
32. Y. Zhou and A. Volek: Mater. Sci. Eng., 2008, vol. A479, pp. 324-33210.1016/j.msea.2007.06.076 ↗
33. G.R. Pease: Weld. J. Res. Suppl., 1957, vol. 36, pp. 330s-334s
34. S.A. David, W.A. Jemian, C.T. Liu and J.A. Horton: Weld. J. Res. Suppl., 1985, vol. 64, pp. 22s-28s
35. C.G. Bieber and R.F. Decker: Trans. TMS-AIME, 1961, vol. 221, pp. 629-636
36. M.P. Seah: Acta Metall., 1980, vol. 28, pp. 955-96210.1016/0001-6160(80)90112-1 ↗
37. N. Wang, S. Mokadem, M. Rappaz and W. Kurz: Acta Mater., 2004, vol. 52, pp. 3173-318210.1016/j.actamat.2004.03.047 ↗
38. P. Lejçek: Grain boundary segregation in metals, 1st ed., Spriner Verlag, Berlin, 201010.1007/978-3-642-12505-8 ↗
39. D. Tytko, P.-P. Choi, J. Klöwer, A. Kostka, G. Inden and D. Raabe: Acta Mater., 2012, vol. 60, pp. 1731-174010.1016/j.actamat.2011.11.020 ↗
40. H.-E. Huang and C.-H. Koo: Mater. Trans., 2004, vol. 45, pp. 554-56110.2320/matertrans.45.554 ↗
41. A. Buchon, A. Menand and D. Blavette: Surf. Sci., 1991, vol. 246, pp. 218-22410.1016/0039-6028(91)90418-R ↗
42. L. Letellier, S. Chambreland, P. Duval and D. Blavette: Appl. Surf. Sci., 1993, vol. 67, pp. 305-31010.1016/0169-4332(93)90330-E ↗
43. N. Eustathopoulos: Int. Met. Rev., 1983, vol. 28, pp. 189-21010.1179/imr.1983.28.1.189 ↗
44. R.F. Decker and J.W. Freeman: Trans. TMS-AIME, 1960, vol. 218, pp. 277-285
45. K. Harris and J.B. Wahl: Mater. Sci. Technol., 2009, vol. 25, pp. 147-15310.1179/174328408X355442 ↗
46. S. Yamaguchi: Mater. Sci. Technol., 1979, vol. 6, pp. 170-175
47. K. Heck, Rißbildung bei der gerichteten Erstarrung von Nickel-Basislegierungen im Vakuumfeinguß, Dissertation, University of Erlangen-Nuremberg, Erlangen, 1996
48. D. McLean: Grain boundaries in metals, Clarendon Press, Oxford, 1957
49. J.E. Doherty, A.F. Giamei and B.H. Kear: Can. Metall. Q., 1974, vol. 13, pp. 229-23610.1179/cmq.1974.13.1.229 ↗
50. J.H. Westbrook: Met. Rev., 1964, vol. 9, pp. 415-471
51. T.M. Williams, A.M. Stoneham and D.R. Harries: Met. Sci., 1976, vol. 10, pp. 14-1910.1179/030634576790431471 ↗
52. J.E. Doherty, B.H. Kear and A.F. Giamei: J. Met., 1971, vol. 23, pp. 59-62
53. Y.Z. Zhou and A. Volek: Scr. Mater., 2006, vol. 54, pp. 2169-217410.1016/j.scriptamat.2006.02.032 ↗
54. H.U. Hong, I.S. Kim, B.G. Choi, Y.S. Yoo and C.Y. Jo: Metall. Mater. Trans. A, 2012, vol. 43, pp. 173-18110.1007/s11661-011-0837-2 ↗
55. S. Terzi, L. Salvo, M. Suéry, N. Limodin, J. Adrien, E. Maire, Y. Pannier, M. Bornert, D. Bernard, M. Felberbaum, M. Rappaz and E. Boller: Scr. Mater., 2009, vol. 61, pp. 449-45210.1016/j.scriptamat.2009.04.041 ↗
56. B. Cai, S. Karagadde, L. Yuan, T.J. Marrow, T. Connolley and P.D. Lee: Acta Mater., 2014, vol. 76, pp. 371-38010.1016/j.actamat.2014.05.035 ↗
57. O. Ludwig, J.-M. Drezet, P. Ménésès, C.L. Martin and M. Suéry: Mater. Sci. Eng., 2005, vol. A413-414, pp. 174-17910.1016/j.msea.2005.09.087 ↗