Hot Tear Susceptibility of Al-Mg-Si-Fe Alloys with Varying Iron Contents
Source abstract
Abstract
Hot tear susceptibility in cast Al-0.52Si-0.34Mg-xFe 6060 aluminum alloys was investigated using a hot tearing test apparatus to simulate hot tearing in DC casting. The test apparatus has two cast bars, one that is used to measure the load response and one which is fixed at both ends to restrain thermal contraction so that hot tearing can be observed and rated where it occurred. The iron (Fe) content, ranging from 0.02 to 0.5 wt pct, was seen to have a major influence on the load response during solidification and the tear rating of these alloys. The findings are discussed in terms of Rappaz-Drezet-Gremaud (RDG) model sensitivity analysis and related to the effect of Fe content on the morphology and prevalence of the β-Al5FeSi and α-AlFeSi intermetallic phases and their influence on the coherency and coalescence of the microstructure.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (55)
Show source-provided references
1. D.G. Eskin, Suyitno, and L. Katgerman: Prog. Mater. Sci., 2004, vol. 49 (5), pp. 629–711.10.1016/S0079-6425(03)00037-9 ↗
2. M. M’Hamdi, A. Mo, and H.G. Fjaer: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3069–83.10.1007/s11661-006-0188-6 ↗
3. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater.Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
4. G.K. Sigworth: AFS Trans., 1996, vol. 104, pp. 1053–62.
5. A.B. Phillion, R.W. Hamilton, D. Fuloria, A.C.L. Leung, P. Rockett, T. Connolley, and P.D. Lee: Acta Mater., 2011, vol. 59, pp. 1436–44.10.1016/j.actamat.2010.11.005 ↗
6. A.B. Phillion, P.D. Lee, E. Maire, and S.L. Cockcroft: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2459–69.10.1007/s11661-008-9584-4 ↗
7. Suyitno, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2388–2400.10.1007/s11661-009-9941-y ↗
8. J.F. Grandfield and L. Wang: Light Metals 2004, 2004, The Minerals, Metals and Materials Society, Warrendale, PA, pp. 685–90.
9. X. Yan and J.C. Lin: Metall. Mater. Trans. B, 2006, vol. 37B, pp. 913–18.10.1007/BF02735013 ↗
10. A. Stangeland, A. Mo, Ø. Nielsen, D. Eskin, and M. M’Hamdi: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2903–15.10.1007/s11661-004-0238-x ↗
11. J.A. Spittle and S.G.R. Brown: Mater. Sci. Technol., 2005, vol. 21(9), pp. 1071–77.10.1179/174328405X51839 ↗
12. Suyitno, W.H. Kool, and L. Katgerman: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1537–46.10.1007/s11661-005-0245-6 ↗
13. Suyitno, D.G. Eskin, V.I. Savran, and L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3551–61.10.1007/s11661-004-0192-7 ↗
14. A. Strangeland, A. Mo, and D.G. Eskin: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2219–29.10.1007/BF02586141 ↗
15. D. Fabrègue, A. Deschamps, M. Suéry, and J.-M. Drezet: Acta Mater., 2006, vol. 54, pp. 5209–20.10.1016/j.actamat.2006.06.027 ↗
16. J. Campbell and T.W. Clyne: Cast Metals, 1991, vol. 3(4), pp. 224–26.10.1080/09534962.1990.11819043 ↗
17. A. Strangeland, A. Mo, M. M’Hamdi, D. Viano, and C.J. Davidson: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 705–14.10.1007/s11661-006-0042-x ↗
18. M. Easton, H. Wang, J. Grandfield, C. Davidson, D. StJohn, L. Sweet, and M. Couper: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 3227–38.10.1007/s11661-012-1132-6 ↗
19. L. Sweet, M. Easton, J.A. Taylor, M. Couper, and N. Parson: Light Metals 2012, 2012, The Minerals, Metals & Materials Society, Warrendale, PA, pp. 275–82.
20. H. Nagaumi, S. Suzuki, T. Okane, and T. Umeda: Mater. Trans., 2006, vol. 47(11), pp. 2821–27.10.2320/matertrans.47.2821 ↗
21. L. Sweet, J.A. Taylor, M.J. Couper, and M. Easton: Mater. Sci. Forum, 2011, vol. 693, pp. 217–23.10.4028/www.scientific.net/MSF.693.217 ↗
22. D. Warrington and D.G. McCartney: Cast Metals, 1989, vol. 2(3), pp. 134–43.10.1080/09534962.1989.11818994 ↗
23. J. Spittle and A. Cushway: Metals Technology, 1983, vol. 10, pp. 6–13.10.1179/030716983803291226 ↗
24. S. Instone, D. StJohn, and J. Grandfield: Inter. J. Cast Metals Res., 2000, vol. 12(6), pp. 441–56.10.1080/13640461.2000.11819381 ↗
25. D.G. Eskin, Suyitno, J.F. Mooney, and L. Katgerman: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 1325–35.10.1007/s11661-004-0307-1 ↗
26. A. Strangeland, A. Mo, Ø. Nielsen, D.G. Eskin, and M. M’Hamdi: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 2903–15.10.1007/s11661-004-0238-x ↗
27. S. Li, K. Sadayappan, and D. Apelian: Inter. J. Cast Metals Res., 2011, vol. 24(2), pp. 88–95.10.1179/1743133610Y.0000000004 ↗
28. C. Davidson, D. Viano, L. Lu, and D. StJohn: Inter. J. Cast Metals Res., 2005, vol. 19(1), pp. 59–65.10.1179/136404606225023291 ↗
29. J.B. Mitchell, S.L. Cockcroft, D. Viano, C. Davidson, and D. StJohn: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 2503–12.10.1007/s11661-007-9221-7 ↗
30. A.B. Phillion, S.L. Cockroft, and P.D. Lee: Scripta Mater., 2006, vol. 55, pp. 489–92.10.1016/j.scriptamat.2006.03.035 ↗
31. J.F. Grandfield, C.J. Davidson, and J.A. Taylor: Light Metals 2001, The Minerals, Metals and Materials Society, Warrendale, PA, 2001, pp. 895–01.
32. L. Katgerman: JOM, 1982, vol. 34, pp. 46–49.10.1007/BF03339110 ↗
33. T.W. Clyne and G.J. Davies: British Foundryman, 1981, vol. 74(4), pp. 65–73.
34. L. Arnberg, G. Chai, and L. Bäckerud: Mater. Sci. Eng. A, 1993, vol. A173(1–2), pp. 101–03.10.1016/0921-5093(93)90195-K ↗
35. A.K. Dahle, S. Instone, and T. Sumitomo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 105–13.10.1007/s11661-003-0212-z ↗
36. S. Vernede, P. Jarry, and M. Rappaz: Acta Mater., 2006, vol. 54(Compendex), pp. 4023–34.10.1016/j.actamat.2006.04.035 ↗
37. S. Vernede and M. Rappaz: Philos. Mag., 2006, vol. 86(Compendex), pp. 3779–94.10.1080/14786430500228705 ↗
38. L. Sweet, S. Zhu, S. Gao, J.A. Taylor, and M.A. Easton: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1737–49.10.1007/s11661-010-0595-6 ↗
39. Y.X. Ju and L. Arnberg: Inter. J. Cast Metals Res., 2003, vol. 16A, pp. 522–30.10.1080/13640461.2003.11819630 ↗
40. J.D. Schloz: 1st Australasian-Pacific Alumininium Extrusion Conference, 2001, Institute of Materials Engineering Australasia Ltd and the Australian Aluminium Council.
41. L. Sweet, M. Easton, J.A. Taylor, C. Davidson, L. Lu, M. Couper, and D. StJohn: Defects and Properties of Cast Metals symposium, TMS 2012 Annual Meeting, The Minerals, Metals & Materials Society, Warrendale, PA, 2012, pp. 1133–38.10.1002/9781118359259.ch195 ↗
42. International Alloy Designations and Chemical Composition Limits for Wrought Aluminum and Wrought Aluminum Alloys revised 2009, The Aluminum Association.
43. S. Lin, C. Aliravci, and M.O. Pekguleryuz: Metall. Mater.Trans. A, 2007, vol. 38A, pp. 1056–68.10.1007/s11661-007-9132-7 ↗
44. M. Easton, J. Grandfield, D. StJohn, and B. Rinderer: Mater. Sci. Forum, 2006, vols. 519–521, pp. 1675–80.10.4028/www.scientific.net/MSF.519-521.1675 ↗
45. J.F. Grandfield: PhD Thesis, The University of Queensland, Brisbane, 2001.
46. J.F. Grandfield, C.J. Davidson, and J.A. Taylor: Light Metals 2001, The Metals, Minerals and Materials Society, 2001, pp. 911–17.
47. M. Rappaz, J.-M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
48. A.B. Phillion, S.L. Cockcroft, and P.D. Lee: Mater. Sci. Eng. A, 2008, vol. 491(1–2), pp. 237–47.10.1016/j.msea.2008.01.078 ↗
49. M. Easton, H. Wang, J. Grandfield, D. StJohn, and E. Sweet: Mater. Forum, 2004, vol. 28, pp. 224–29.
50. A.L. Greer, A.M. Bunn, A. Tronche, P.V. Evans, and D.J. Bristow: Acta Mater., 2000, vol. 48, pp. 2823–35.10.1016/S1359-6454(00)00094-X ↗
51. J.O. Andersson, T. Helander, L. Hoglund, P. Shi, and B. Sundman: Calphad: Comput. Coupl. Phase Diag. Thermochem., 2002, vol. 26(2), pp. 273–12.10.1016/S0364-5916(02)00037-8 ↗
52. D. Viano, D. StJohn, J. Grandfield, and C. Caceres: Light Metals 2005, The Minerals, Metals and Materials Society, Warrendale, PA, 2005, pp. 1069–73.
53. C. Puncreobutr, P.D. Lee, R.W. Hamilton, and A.B. Phillion: JOM, 2012, vol. 64(1), pp. 89–95.10.1007/s11837-011-0217-9 ↗
54. M. Rappaz, A. Jacot, and W.J. Boettinger: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 467–79.10.1007/s11661-003-0083-3 ↗
55. S. Vernede, J.A. Dantzig, and M. Rappaz: Acta Mater., 2009, vol. 57(Compendex), pp. 1554–69.10.1016/j.actamat.2008.12.006 ↗