journal article·2002-02

Steady-state creep of α-zirconium at temperatures up to 850 °C

Troy A. Hayes, M. E. Kassner, Robert S. Rosen

Publisher page

Abstract

Cumulative zirconium creep data over a broad range of stresses (0.1 to 115 MPa) and temperatures (300 °C to 850 °C) were analyzed based on an extensive literature review. Zirconium obeys traditional power-law creep with a stress exponent of approximately 6.4 over stain rates and temperatures usually associated with the conventional “five-power-law” regime. Thus, dislocation climb, rather than the often assumed glide mechanism, may be rate controlling. Power-law breakdown occurs at values of \(\dot \varepsilon ss /D\) greater than approximately 109 cm−2, consistent with most traditional five-power-law materials. The creep rate of zirconium at low values of σ/G varies proportionally to the applied stress. The rate-controlling mechanism(s) for creep within this regime is unclear. A grain-size dependency may exist, particularly at small (<90 µm) sizes, suggesting a diffusional mechanism. A grain-size independence at larger grain sizes supports a Harper-Dorn mechanism, but the low observed activation energy (∼90 kJ/mol) is not consistent with those observed at similar temperatures at higher stresses in the five-power-law regime (270 kJ/mol) where creep is also believed to be lattice self-diffusion controlled. The stress dependence in this regime is not consistent with traditional grain-boundary sliding mechanisms.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Nuclear Materials and Properties · Microstructure and mechanical properties · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (74)

Show source-provided references
1. R.C. Ecob and A.T. Donaldson: J. Nucl. Mater., 1985, vol. 132, pp. 110–25.10.1016/0022-3115(85)90405-2 ↗
2. V. Fidleris and C.D. Williams: Electrochem. Technol., 1966, vol. 4, pp. 258–67.
3. V. Fidleris: J. Nucl. Mater., 1968, vol. 26, pp. 51–76.10.1016/0022-3115(68)90158-X ↗
4. A.J. Ardell and O.D. Sherby: Trans. TMS-AIME, 1967, vol. 239, pp. 1547–56.
5. S.R. MacEwen, R.G. Fleck, E.T.C. Ho, and O.T. Woo: Metall. Trans. A, 1981, vol. 12A, pp. 1751–59.10.1007/BF02643757 ↗
6. E.R. Gilbert, S.A. Duran, and A.L. Bement: Applications-Related Phenomena for Zirconium and Its Alloys, ASTM STP 458, ASTM, Philadelphia, PA, 1969, pp. 210–25.10.1520/STP43829S ↗
7. M. Pahutova and J. Cadek: Mater. Sci. Eng., 1973, vol. 11, pp. 151–62.10.1016/0025-5416(73)90061-X ↗
8. B. Ramaswami and G.B. Craig: Trans. TMS-AIME, 1967, vol. 239, pp. 1226–31.
9. N. Prasad, G. Malakondaiah, and P. Rama Rao: Trans. Ind. Inst. Met., 1989, vol. 42, suppl., pp. S165-S174.
10. I.M. Bernstein: Trans. TMS-AIME, 1967, vol. 239, pp. 1518–22.
11. H. Siethoff and K. Ahlborn: Scripta Metall., 1987, vol. 21, pp. 1439–44.10.1016/0036-9748(87)90279-1 ↗
12. J. Novotny, J. Fiala, and J. Cadek: Acta Metall., 1985, vol. 33, pp. 905–11.10.1016/0001-6160(85)90115-4 ↗
13. J. Fiala, L. Kloc, and J. Cadek: Mater. Sci. Eng., 1991, vol. A136, pp. 9–15.10.1016/0921-5093(91)90437-R ↗
14. J. Fiala and J. Cadek: Mater. Sci. Eng., 1985, vol. 75, pp. 117–26.10.1016/0025-5416(85)90183-1 ↗
15. N. Prasad, G. Malakondaiah, and P. Rama Rao: Scripta Metall., 1992, vol. 26, pp. 541–43.10.1016/0956-716X(92)90280-R ↗
16. O.A. Ruano, J. Wadsworth, and O.D. Sherby: Mater. Sci. Eng., 1986, vol. 84, pp. L1-L6.10.1016/0025-5416(86)90245-4 ↗
17. M.E. Kassner and M.-T. Perez-Prado: Progr. Mater. Sci., 2000, vol. 45, pp. 1–102.10.1016/S0079-6425(99)00006-7 ↗
18. W. Koster, L. Bangert, and M. Evers: Z. Metallkd., 1956, vol. 47, pp. 564–70.
19. O.D. Sherby and P.M. Burke: Progr. Mater. Sci., 1967, vol. 13, pp. 325–86.
20. R.D. Warda, V. Fidleris, and E. Teghtsoonian: Metall. Trans., 1973, vol. 4, pp. 1201–06.10.1007/BF02644512 ↗
21. P.L. Gruzin, V.S. Yemel’yanov, G.C. Ryabova, and G.B. Federov: Proc. 2nd UN Int. Conf. on the Peaceful Uses of Atomic Energy: V19, The Use of Isotopes: Industrial Use, United Nations, Geneva, 1958, pp. 187–92.
22. M. Lubbehusen, K. Vierregge, G.M. Hood, H. Mehrer, and C. Herzig: J. Nucl. Mater., 1991, vol. 182, pp. 164–69.10.1016/0022-3115(91)90427-9 ↗
23. F. Dyment and C.M. Libanati: J. Mater. Sci., 1968, vol. 3, pp. 349–59.10.1007/BF00550978 ↗
24. J. Horvath, F. Dyment, and H. Mehrer: J. Nucl. Mater., 1984, vol. 126, pp. 206–14.10.1016/0022-3115(84)90030-8 ↗
25. G.B. Federov and F.I. Zhomov: Metall. Metall. Metall., 1959, No. 1, pp. 161–69.
26. E.V. Borisov, Y.G. Godin, P.L. Gruzin, A.J. Eustyukin, and V.S.A. Emelyanov: All-Union Conf. Use of Isotopes and Radiation, Moscow, 1958: Metall. Metallogr., 1958, pp. 291–98.
27. V.S. Lyashenko, V.N. Bykov, and L.B. Pavlinov: Phys. Metall. Metallogr., 1959, vol. 8, pp. 40–46.
28. P. Flubacher: “Self-Diffusionsversuche in α-Zirkon,” Wurenlingen, Switzerland, EIR-Bericht No. 49, 1963.
29. G.M. Hood: J. Nucl. Mater., 1986, vol. 139, pp. 179–84.10.1016/0022-3115(86)90170-4 ↗
30. F. Povolo and G.H. Rubiolo: Phil. Mag., 1987, vol. 56, pp. 209–29.10.1080/01418618708205162 ↗
31. E.A. Smirnov, K.E. Smirnov, I.L. Krylov, and Y.A. Shevchuk: Def. Diff. Forum, 1989, vols. 66–69, pp. 359–64.
32. N. Matsuura, G.M. Hood, and H. Zou: J. Nucl. Mater., 1996, vol. 238, pp. 260–63.10.1016/S0022-3115(96)00458-8 ↗
33. G.M. Hood: J. Nucl. Mater., 1988, vol. 159, pp. 149–75.10.1016/0022-3115(88)90091-8 ↗
34. G.V. Kidson: Electrochem. Technol., 1966, vol. 4, pp. 193–205.
35. W. Frank: Def. Diff. Forum, 1989, vols. 66–69, pp. 387–94.
36. E. Forlerer de Svarch and C. Rodriguez: J. Nucl. Mater., 1991, vol. 185, pp. 167–73.10.1016/0022-3115(91)90332-2 ↗
37. C. Rodriguez and E. Forlerer de Svarch: J. Nucl. Mater., 1992, vol. 187, pp. 97–98.10.1016/0022-3115(92)90324-E ↗
38. R.A. Perez, F. Dyment, Hj. Matzke, G. Linker, and H. Dhers: J. Nucl. Mater., 1994, vol. 217, pp. 48–53.10.1016/0022-3115(94)90303-4 ↗
39. F. Dyment, M. Behar, H. Dhers, P.L. Grande, E. Savino, and F.C. Zawislak: Appl. Phys. A, 1990, vol. A51, pp. 29–33.10.1007/BF00324462 ↗
40. G.M. Hood and R.J. Schultz: Acta Metall., 1974, vol. 22, pp. 459–64.10.1016/0001-6160(74)90098-4 ↗
41. G.M. Hood: J. Nucl. Mater., 1985, vol. 135, pp. 292–95.10.1016/0022-3115(85)90094-7 ↗
42. G.M. Hood, H. Zou, R.J. Schultz, E.H. Bromley, and J.A. Jackman: J. Nucl. Mater., 1994, vol. 217, pp. 229–32.10.1016/0022-3115(94)90371-9 ↗
43. G.M. Hood: Def. Diff. Forum, 1993, vols. 95–98, pp. 755–74.10.4028/www.scientific.net/DDF.95-98.755 ↗
44. H. Nakajima, G.M. Hood, and R.J. Schultz: Phil. Mag. B, 1988, vol. 58, pp. 319–37.10.1080/13642818808208473 ↗
45. A.T. Donaldson and R.C. Ecob: Scripta Metall., 1985, vol. 19, pp. 1313–18.10.1016/0036-9748(85)90057-2 ↗
46. C. Daraio, M. Wang, and M.E. Kassner: unpublished work, Oregon State University, Corvallis, OR, June 2001.
47. K. Vieregge and C. Herzig: J. Nucl. Mater., 1990, vol. 173, pp. 118–29.10.1016/0022-3115(90)90250-Q ↗
48. G.A. Henshall, M.E. Kassner, and H.J. McQueen: Metall. Mater. Trans. A, 1992, vol. A23, pp. 881–89.10.1007/BF02675565 ↗
49. E. Kohn and D.P. Dunne: Metallography, 1977, vol. 10, pp. 371–83.10.1016/0026-0800(77)90016-7 ↗
50. R.L. Coble: J. Appl. Phys., 1963, vol. 34, pp. 1679–82.10.1063/1.1702656 ↗
51. M.F. Ashby and R.A. Verrall: Acta Metall., 1973, vol. 21, pp. 149–63.10.1016/0001-6160(73)90057-6 ↗
52. F.R.N. Nabarro: Report of Conf. on the Soils, The Physical Society, London, 1948, p. 75.
53. J. Harper and J.E. Dorn: Acta Metall., 1957, vol. 5, pp. 654–65.10.1016/0001-6160(57)90112-8 ↗
54. D.W. James and G.M. Leak: Phil. Mag., 1965, vol. 12, pp. 491–503.10.1080/14786436508218895 ↗
55. A. Ball and M.M. Hutchison: Met. Sci. J., 1969, vol. 3, pp. 1–7.10.1016/0036-9748(69)90167-7 ↗
56. T.G. Langdon: Phil. Mag., 1970, vol. 22, pp. 945–48.10.1080/14786437008221064 ↗
57. A.K. Mukherjee: Mater. Sci. Eng. A, 1971, vol. 8, pp. 83–89.10.1016/0025-5416(71)90085-1 ↗
58. A. Arieli and A.K. Mukherjee: Mater. Sci. Eng. A, 1980, vol. 45, pp. 61–70.10.1016/0025-5416(80)90070-1 ↗
59. T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2437–43.10.1016/0956-7151(94)90322-0 ↗
60. M.Y. Wu and O.D. Sherby: Acta Metall., 1984, vol. 32, pp. 1561–72.10.1016/0001-6160(84)90102-0 ↗
61. A.J. Ardell: Acta Mater., 1997, vol. 45, pp. 2971–81.10.1016/S1359-6454(96)00397-7 ↗
62. W. Blum and W. Maier: Phys. Status Solidi A, 1999, vol. 171, pp. 467–74.10.1002/(SICI)1521-396X(199902)171:2<467::AID-PSSA467>3.0.CO;2-8 ↗
63. T.G. Langdon and P. Yavari: Acta Metall., 1982, vol. 30, pp. 881–87.10.1016/0001-6160(82)90086-4 ↗
64. F.R.N. Nabarro: Acta Metall., 1989, vol. 37, pp. 2217–22.10.1016/0001-6160(89)90147-8 ↗
65. J.N. Wang and T.G. Langdon: Acta Metall. Mater., 1994, vol. 42, pp. 2487–92.10.1016/0956-7151(94)90328-X ↗
66. L. Kloc, J. Fiala, and J. Cadek: Proc. Creep Behaviour of Advanced Materials for the 21st Century, TMS Annual Meeting, San Diego, CA, Feb. 28-Mar. 4 1999, R.S. Mishra, A.K. Mukherjee, and K.L. Murty, eds., TMS, Warrendale, PA, 1999, pp. 471–79.
67. D.M. Owen and T.G. Langdon: Mater. Sci. Eng., 1996, vol. A216, pp. 20–29.10.1016/0921-5093(96)10382-8 ↗
68. G. Malakondaiah and P. Rama Rao: Acta Metall., 1981, vol. 29, pp. 1263–75.10.1016/0001-6160(81)90017-1 ↗
69. G. Malakondaiah and P. Rama Rao: Mater. Sci. Eng., 1982, vol. 52, pp. 207–21.10.1016/0025-5416(82)90148-3 ↗
70. A.H. Chokshi: Scripta Metall., 1985, vol. 19, pp. 529–34.10.1016/0036-9748(85)90128-0 ↗
71. L. Kloc, J. Fiala, and J. Cadek: Mater. Sci. Eng., 1990, vol. A130, pp. 165–72.10.1016/0921-5093(90)90057-A ↗
72. J. Fiala, L. Kloc, and J. Cakek: Mater. Sci. Eng., 1991, vol. A136, pp. 9–15.10.1016/0921-5093(91)90437-R ↗
73. L. Kloc, J. Fiala, and J. Cadek: Mater. Sci. Eng., 1995, vol. A202, pp. 11–17.10.1016/0921-5093(95)09813-5 ↗
74. P.G. Shewmon: Diffusion in Solids, J. Williams Book Company, Jenks, OK, 1983, p. 204.