journal article·2007-02

Kinetics and Properties of Micro Arc Oxidation Coatings Deposited on Commercial Al Alloys

L. Rama krishna, A. Sudha Purnima, Nitin P. Wasekar, G. Sundararajan

Publisher page

Abstract

The micro arc oxidation (MAO) technique is being increasingly recognized as a novel and ecofriendly means of depositing dense ceramic oxide coatings on Al and its alloys. In the present study, the deposition kinetics, surface roughness, morphology, phase distribution and the microhardness of the MAO coatings deposited on ten different commercially available Al substrates having widely differing chemical composition has been investigated. Further, the tribological properties of the coatings obtained on different Al alloys in comparison with the bare substrates have also been evaluated using dry sand abrasion, solid-particle erosion and pin-on-disc dry sliding wear tests. The results clearly demonstrate that the alloying elements added to the Al substrate substantially influence the MAO coating deposition kinetics and coating properties. In the case of Al-Si alloys, the coating deposition kinetics is non-linear and the Al 6 Si 2 O 13 (mullite) is observed to form. With increasing Si content, the corresponding mullite phase also increases. Increasing mullite content in the coating adversely affects the tribological performance. Excepting Al-Si alloys, all other alloys investigated including commercial purity Al exhibit linear coating deposition kinetics. Of all the alloys investigated, Al-Li alloy exhibits the highest coating deposition rate and the 6061 T6 Al alloy exhibits the best coating properties.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Metal and Thin Film Mechanics · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (27)

Show source-provided references
1. G.A. Markov and Markova G.V: USSR Patent No. 526,961, Bull. Inventions, 1976, vol. 32
2. Snezhko L.A., Beskrovnyj L.A., Mironova M.K., Nevkrytyj Y.M., Tchernenko V.I. 1980 Zashch. Met., 16(3):365 (in Russian)
3. Snezhko L.A. Tchernenko V.I. 1983 Elektron. Obrab. Mater., 4:38 (in Russian)
4. Dittrich K.H., Krysmann W., Kurze P., Schneider H.G. 1984 Cryst. Res. Technol., 19(1):9310.1002/crat.2170190117 ↗
5. Krysmann W., Kurze P., Dittrich K.H., Schneider H.G. 1984 Cryst. Res. Technol., 19(7):97310.1002/crat.2170190721 ↗
6. O.A. Khrisanfova and P.S. Gordienko: 1987 Preprint No. 2986-B89, Institute of Khimii DVO AN SSSR, Vladivostok, (in Russian)
7. Gordienko P.S., Nedozorov P.M., Volkova L.M., Yarovaya T.P., Khrisanfova O.A. 1989 Zashch. Met., 25(1):125 (in Russian)
8. Klapkiv M.D., Nykyforchyn H.M., Posuvailo V.M. 1994 Mater. Sci., 30:33310.1007/BF00569685 ↗
9. Voevodin A.A., Yerokhin A.L., Lyubimov V.V., Donely M.S., Zabinski J.S. 1996 Surf. Coating Technol., 86–87:51610.1016/S0257-8972(96)03069-1 ↗
10. Yerokhin A.L., Lyubimov V.V., Ashitkov R.V. 1998 Ceram. Int., 24:1–610.1016/S0272-8842(96)00067-3 ↗
11. Yerokhin A.L., Nie X., Leyland A., Matthews A., Dowey S.J. 1999 Surf. Coating Technol., 122:73–9310.1016/S0257-8972(99)00441-7 ↗
12. Yerokhin A.L., Voevodin A.A., Lyubimov V.V., Zabinski J., Donley M. 1998 Surf. Coating Technol., 110:140–4610.1016/S0257-8972(98)00694-X ↗
13. Nie X., Wilson A., Leyland A., Matthews A. 2000 Surf. Coating Technol., 121:506–1310.1016/S0257-8972(00)00816-1 ↗
14. Wang Y.K., Sheng L., Xiong R.Z., Li B.S. 1999 Surf. Eng., 15:10910.1179/026708499101516425 ↗
15. Sundararajan G. Rama Krishna L. 2003 Surf. Coating Technol., 167:269–7710.1016/S0257-8972(02)00918-0 ↗
16. Rama Krishna L., Somaraju K.R.C., Sundararajan G. 2003 Surf. Coating Technol., 163–164:484–9010.1016/S0257-8972(02)00646-1 ↗
17. Mecuson F., Czerwiec T., Belmonte T., Dujardin L., Viola A., Henrion G. 2005 Surf. Coating Technol., 2000:804–0810.1016/j.surfcoat.2005.01.076 ↗
18. L. Rama Krishna, A. Sudha Purnima, and G. Sundararajan: Wear, 2006, in press
19. Nykyforchyn H.M., Klapkiv M.D., Posuvailo V.M. 1998 Surf. Coating Technol., 100–101:219–2110.1016/S0257-8972(97)00617-8 ↗
20. Nie X., Meletis E.I., Jiang J.C., Leyland A., Leyland A., Yerokhin A.L., Mathews A. 2002 Surf. Coating Technol., 149:245–5110.1016/S0257-8972(01)01453-0 ↗
21. Guangliang Y., Xianyi L., Yizhen B., Haifeng C., Zengsun J. 2002 J. Alloys Compounds, 345:196–20010.1016/S0925-8388(02)00289-X ↗
22. Wang L., Nie X. 2006 Thin Solid Films, 494:211–1810.1016/j.tsf.2005.07.184 ↗
23. L. Rama Krishna, A.V. Rybalco, and G. Sundararajan: U.S. Patent No. 6,893,551 B2
24. Rama Krishna L., Sen D., Srinivasa Rao D., Sundararajan G. 2003 J. Thermal Spray Technol., 12(1):77–7910.1361/105996303770348528 ↗
25. Rama Krishna L., Sen D., Rao Y.S., Rao G.V.N., and Sundararajan G. 2002 J. Mater. Res., 17(10):2514–2310.1557/JMR.2002.0366 ↗
26. Murugesh L. Scattergood R.O. 1991 J. Mater. Sci., 26(20):5456–6610.1007/BF02403943 ↗
27. Shipway P.H., Hutchings I.M. 1996 Wear, 193:105–1310.1016/0043-1648(95)06694-2 ↗