Case reviews on the effect of microstructure on the corrosion behavior of austenitic alloys for processing and storage of nuclear waste
Source abstract
Abstract
This article describes the corrosion behavior of special austenitic alloys for waste management applications. The special stainless steels have controlled levels of alloying and impurity elements and inclusion levels. It is shown that “active” inclusions and segregation of chromium along flow lines accelerated IGC of nonsensitized stainless steels. Concentration of Cr+6 ions in the grooves of dissolved inclusions increased the potential to the transpassive region of the material, leading to accelerated attack. It is shown that a combination of cold working and controlled solution annealing resulted in a microstructure that resisted corrosion even after a sensitization heat treatment. This imparted extra resistance to corrosion by increasing the fraction of “random” grain boundaries above a threshold value. Randomization of grain boundaries made the stainless steels resistant to sensitization, IGC, and intergranular stress corrosion cracking (IGSCC) in even hot chloride environments. The increased corrosion resistance has been attributed to connectivity of random grain boundaries. The reaction mechanism between the molten glass and the material for process pot, alloy 690, during the vitrification process has been shown to result in depletion of chromium from the reacting surfaces. A comparison is drawn between the electrochemical behavior of alloys 33 and 22 in 1 M HCl at 65 °C. It is shown that a secondary phase formed during welding of alloy 33 impaired corrosion properties in the HCl environment.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Welding Techniques and Residual Stresses · Corrosion Behavior and Inhibition
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (34)
Show source-provided references
1. “Shaping Third Stage of Indian Nuclear Programme,” http://www.dae.gov.in/publ/3rdstage.pdf, 2003; and “Long Term Vision of the Department of Atomic Energy,” http://www.dae.gov.in/publ/vision.pdf, 2003.
2. Kanwar Raj: Proc. 14th Annual Conf. of Indian Nuclear Society and 1st BRNS Conf. on Nuclear Fuel Cycle, Kalpakkam, Dec. 17–19, 2003, Baldev Raj and P.R. Vasudev Rao, eds., Indian Nuclear Society, Mumbai, 2003, pp. IT/1-18.
3. D. Wasnik, V. Kain, I. Samajdar, B. Verlinden, and P.K. De: Acta Mater., 2002, vol. 50 (18), pp. 4587–4601.10.1016/S1359-6454(02)00306-3 ↗
4. D. Wasnik, V. Kain, I. Samajdar, B. Verlinden, and P.K. De: ASM J. Mater. Eng. Performance, 2003, vol. 12 (4), pp. 402–07.10.1361/105994903770342926 ↗
5. M. Shimada, H. Kokawa, Z.J. Wang, Y.S. Sato, and I. Karibe: Acta Mater., 2002, vol. 50, p. 2331.10.1016/S1359-6454(02)00064-2 ↗
6. G.M. Gordon: Corrosion, 2002, vol. 58 (10), pp. 811–25.10.5006/1.3287662 ↗
7. M.J. Cieslak, T.J. Headley, and A.D. Romig: Metall. Trans. A, 1986, vol. 17A, pp. 1986–2035.
8. Larry Paul: Waste Management Conf. 2001, Tucson, AZ, Feb. 25–Mar. 1, 2001.
9. Raul B Rebak: Effects of Metallurgical Variables on the Corrosion of High-Nickel Alloys, ASM Handbook 13A, ASM INTERNATIONAL, Metals Park, OH, 2003, pp. 279–86.
10. VDM Report No. 26, VDM, Werdohl, Germany, 2002, http://www.kruppvdm.de_pdf/VDMReport26_c.pdf.
11. T. Gladman: Mater. Performance, 1989, vol. 28 (2), p. 699.
12. Vivekanand Kain, S.S. Shinde, and H.S. Gadiyar: ASM J. Mater. Eng. Performance, 1994, vol. 36 (6), pp. 699–705.10.1007/BF02818368 ↗
13. Vivekanand Kain and P.K. De: Trans. Indian Inst. Met., 2003, vol. 56 (1), pp. 31–37.
14. Vivekanand Kain and P.K. De: Proc. Conf. on Materials and Technologies for Nuclear Fuel Cycle—MRPI 2003, Dec. 15–16, 2003, Baldev Raj, K. Bhanu Shankar Rao, P. Shankar, and N. Murali, eds., at Chennai by the Board of Research in Nuclear Science and Indian Nuclear Society, Kalpakkam, pp. 9–22.
15. A.J. Sedriks: Corrosion Stainless Steels, John Wiley & Sons, New York, NY, 1996, p. 110.
16. J.S. Armijo: Corrosion, 1968, vol. 24, p. 24.10.5006/0010-9312-24.1.24 ↗
17. H. Coriou, J. Hure, and G. Plante: Electrochem. Acta, 1961, vol. 5, p. 105.10.1016/0013-4686(61)87008-4 ↗
18. M.P. Ryan, D.E. Williams, R.J. Chater, B.M. Hutton, and D.S. McPhail: Nature, 2002, vol. 415, p. 770.10.1038/415770a ↗
19. Q. Meng, G.S. Frankel, H.O. Colijn, and S.H. Goss: Corrosion, 2004, vol. 60, p. 346.10.5006/1.3287741 ↗
20. M.P. Ryan and D.E. Williams: Nature, 2003, vol. 424, p. 390.10.1038/424390a ↗
21. Vivekanand Kain, S.S. Chouthai, and H.S. Gadiyar: Br. Corr. J., 1992, vol. 27 (1), pp. 59–65.10.1179/000705992798268819 ↗
22. B.V. Patil, A.H. Cahn, and R.J. Choulet: Steelmaking and Refining, AISE Steel Foundation, Pittsburgh, PA, 1998, pp. 715–18.
23. Paul G. Shewmon: Diffusion in Solids, McGraw-Hill, New York, NY, 1963, p. 175.
24. L.E. Murr: Interfacial Phenomenon in Metals and Alloys, Addison-Wesley Publishing Company, Reading, MA, 1975; reprinted by Teck Books, Fairfax, VA, 1991.
25. A.P. Majidi and M.A. Streicher: Corrosion, 1984, vol. 40 (11), pp. 584–93.10.5006/1.3581921 ↗
26. ASTM A 262, Annual Book of Standards, ASTM, West Conshohocken, PA, 2000, vol. 3.01.
27. ASTM G 123: Annual Book of Standards, ASTM, West Conshohocken, PA, 2000, vol. 3.01.
28. Electron Backscatter Diffraction in Materials Science, Adam I. Schwartz, Mukul Kumar, and Brent L. Adams, eds., Kluwer Academic, New York, NY, 2000.
29. M.A. Gaudett and J.R. Scully: J. Electrochem. Soc., 1993, vol. 140, pp. 3425–35.10.1149/1.2221106 ↗
30. H. Kokawa, M. Shimada, and Y.S. Sato: JOM, 2000, vol. 52 (7), pp. 34–37.10.1007/s11837-000-0159-0 ↗
31. A. Borello and A. Mignone: Br. Corr. J., 1982, vol. 17, pp. 176–83.10.1179/000705982798274237 ↗
32. M. Kowaka, H. Nagano, T. Kudo, and Y. Okada: Nucl. Technol., 1981, vol. 55, pp. 394–404.10.13182/NT55-394 ↗
33. R.B. Rebak, N.E. Koon, and P. Crook: in Electrochemical Approaches to Selected Corrosion and Corrosion Control Studies, P.L. Bonora and F. Daflorian, eds., IOM Communications, London, 2000, pp. 245–54.
34. R.B. Leonard: Corrosion, 1969, vol. 25, p. 222.10.5006/0010-9312-25.5.222 ↗