Influence of Process Parameters on Microstructure and Mechanical Properties of Friction-Stir-Processed Mg-Gd-Y-Zr Casting
Source abstract
Abstract
Mg-10Gd-3Y-0.5Zr (wt pct) casting was subjected to friction stir processing (FSP) at a constant rotation rate of 800 rpm and varied travel speeds of 25, 50, and 100 mm/minute. FSP resulted in the generation of fine-grained microstructure and fundamental dissolution of coarse Mg5(Gd,Y) phase at the grain boundaries, thereby enhancing the tensile properties significantly at both room and elevated temperatures. The grain size of the FSP samples decreased with the increasing travel speed, whereas the microstructure heterogeneity with the banded structure (onion rings) became evident at a higher travel speed. Tensile elongation of the FSP samples increased as the travel speed increased, whereas the highest strengths were obtained at the medium travel speed of 50 mm/minute. Higher strengths and greater elongations were observed for the FSP samples in the transverse direction (TD) than in the longitudinal direction (LD). After post-FSP aging, the strengths of the FSP samples were increased significantly with the TD and LD exhibiting the same strengths; however, the elongation was decreased remarkably with the TD having higher elongation than the LD. A variation of the tensile properties was discussed in detail based on the microstructure heterogeneity and fracture surfaces.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (35)
Show source-provided references
1. B.L. Mordike and T. Ebert: Mater. Sci. Eng. A, 2002, vol. 302, pp. 37–45.10.1016/S0921-5093(00)01351-4 ↗
2. L.L. Rokhlin: Magnesium Alloys Containing Rare Earth Metals: Structure and properties, Taylor and Francis, London, UK, 2003.10.1201/9781482265163 ↗
3. J.P. Li, Z. Yang, and T. Liu: Scripta Mater., 2007, vol. 56, pp. 137–40.10.1016/j.scriptamat.2006.09.008 ↗
4. R.G. Li, J.F. Nie, G.J. Huang, Y.C. Xin, and Q. Liu: Scripta Mater., 2011, vol. 64, pp. 950–53.10.1016/j.scriptamat.2011.01.042 ↗
5. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
6. A.H. Feng, B.L. Xiao, Z.Y. Ma, and R.S. Chen: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2447–56.10.1007/s11661-009-9923-0 ↗
7. M. Santella, A. Frederick, C. Degen, and T.Y. Pan: JOM, 2006, vol. 58, pp. 56–61.10.1007/s11837-006-0025-9 ↗
8. A.H. Feng and Z.Y. Ma: Scripta Mater., 2007, vol. 56, pp. 397–400.10.1016/j.scriptamat.2006.10.035 ↗
9. D.R. Ni, D. Wang, A.H. Feng, G. Yao, and Z.Y. Ma: Scripta Mater., 2009, vol. 61, pp. 568–71.10.1016/j.scriptamat.2009.05.023 ↗
10. M. Tsujikawa, S.W. Chung, and M. Tanaka: Mater. Trans., 2005, vol. 46, pp. 3081–84.10.2320/matertrans.46.3081 ↗
11. T.A. Freeney and R.S. Mishra: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 73–84.10.1007/s11661-009-0080-2 ↗
12. B.L. Xiao, Q.Yang, J. Yang, W.G. Wang, G.M. Xie, and Z.Y. Ma: J. Alloys Compd., 2011, vol. 509, pp. 2879–84.10.1016/j.jallcom.2010.11.147 ↗
13. M.W. Mahoney, C.G. Rhodes, J.G. Flintoff, W.H. Bingel, and R.A. Spurling: Metall. Mater. Trans. A, 1998, vol. 29A, pp. 1955–64.10.1007/s11661-998-0021-5 ↗
14. M.A. Sutton, B. Yang, A.P. Reynolds, and R. Taylor: Mater. Sci. Eng. A, 2002, vol. 323A, pp. 160–66.10.1016/S0921-5093(01)01358-2 ↗
15. Z.Y. Ma, A.L. Pilchak, and M.C. Juhas: Scripta Mater., 2008, vol. 58, pp. 361–66.10.1016/j.scriptamat.2007.09.062 ↗
16. T.U. Seidel and A.P. Reynolds: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 2879–84.10.1007/s11661-001-1038-1 ↗
17. Z.W. Chen, T.Pasang, and Y. Qi: Mater. Sci. Eng. A, 2008, vol. 474A, pp. 312–16.10.1016/j.msea.2007.05.074 ↗
18. C.I. Chang, C.J. Lee, and J.C. Huang: Scripta Mater., 2004, vol. 51, pp. 509–14.10.1016/j.scriptamat.2004.05.043 ↗
19. K.A.A. Hassan, P.B. Prangnell, A.F. Norman, D.A. Price, and S.W. Williams: Sci. Technol. Weld. Join., 2003, vol. 8, pp. 257–68.10.1179/136217103225005480 ↗
20. K.N. Krishnan: Mater. Sci. Eng. A, 2002, vol. 327A, pp. 246–51.10.1016/S0921-5093(01)01474-5 ↗
21. D. Zhang, M. Suzuki, and K. Maruyama: Scripta Mater., 2005, vol. 52, pp. 899–903.10.1016/j.scriptamat.2005.01.003 ↗
22. Y. Gao, Q.D. Wang, J.H. Gu, Y. Zhao, and Y. Tong: Mater. Sci. Eng. A, 2007, vol. 459A, pp. 117–23.10.1016/j.msea.2007.01.057 ↗
23. T.A. Freeney, R.S. Mishra, G.J. Grant, and R. Verma: Friction Stir Welding and Processing IV, TMS, Warrendale, PA, 2007.
24. K Lücke and K Deter: Acta Metall., 1957, vol. 5, pp. 628–37.10.1016/0001-6160(57)90109-8 ↗
25. J. Bohlen, M.R. Nürnberg, J.W. Senn, D. Letzig, S.R. Agnew (2007) Acta Mater. 55:2101–12.10.1016/j.actamat.2006.11.013 ↗
26. S.M. He, X.Q. Zeng, L.M. Peng, X. Gao, J.F. Nie, and W.J. Ding: J. Alloys Compd., 2007, vol. 427, pp. 316–23.10.1016/j.jallcom.2006.03.015 ↗
27. L. Gao, R.S. Chen, and E.H. Han: J. Alloys Compd., 2009, vol. 481, pp. 379–84.10.1016/j.jallcom.2009.02.131 ↗
28. K.S. Ravichandran, S.S. Sahay, and J.G. Byrne: Scripta Mater., 1996, vol. 35, pp. 1135–40.10.1016/1359-6462(96)00289-8 ↗
29. W. Woo, H. Choo, D.W. Brown, P.K. Liaw, and Z. Feng: Scripta Mater., 2006, vol. 54, pp. 1859–64.10.1016/j.scriptamat.2006.02.019 ↗
30. G. Bhargava, W. Yuan, S.S. Webb, and R.S. Mishra: Metall. Mater. Trans. A., 2010, vol. 41A, pp. 13–17.10.1007/s11661-009-0079-8 ↗
31. J. Wang, E.M. Taleff, and D. Kovar: Acta Mater., 2004, vol. 52, pp. 4685–93.10.1016/j.actamat.2004.06.034 ↗
32. J.D. French, J.H. Zhao, M.P. Harmer, H.M. Chan, and G.A. Miller: J. Am. Ceram. Soc., 1994, vol. 77, pp. 2857–65.10.1111/j.1151-2916.1994.tb04515.x ↗
33. J. Inoue, S. Nambu, Y. Ishimoto, and T. Koseki: Scripta Mater., 2008, vol. 59, pp. 1055–58.10.1016/j.scriptamat.2008.07.020 ↗
34. I.A. Anyanwu, S. Kamado, and Y. Kojima: Mater. Trans., 2001, vol. 42, pp. 1206–11.10.2320/matertrans.42.1206 ↗
35. H. Somekawa, A. Singh, and T. Mukai: Phil. Mag. Lett., 2009, vol. 89, pp. 2–10.10.1080/09500830802537718 ↗