Precipitation Strengthening in Al-Ni-Mn Alloys
Source abstract
Abstract
Precipitation hardening of eutectic and hypoeutectic Al-Ni alloys by 2 to 4 wt pct. manganese is investigated with focus on the effect of the alloys’ chemical composition and solidification cooling rate on microstructure and tensile strength. Within the context of the investigation, mathematical equations based on the Orowan Looping strengthening mechanism were used to calculate the strengthening increment contributed by each of the phases present in the aged alloy. The calculations agree well with measured values and suggest that the larger part of the alloy’s yield strength is due to the Al3Ni eutectic phase, this is closely followed by contribution from the Al6Mn particles, which precipitate predominantly at grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · High Temperature Alloys and Creep
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. T. Koutsoukis and M. M. Makhlouf: Proceedings of 115th TMS Annual Meeting, Orlando, Florida, 2015.
2. A.R. Cooke and J.W. Martin: J. of Mater. Sci., 1976, vol. 11, pp. 665-69.10.1007/BF01209452 ↗
3. Y.Y. Fan and M.M. Makhlouf: Proceedings of the Light Metals Technology Conference, Old Windsor, 2013, pp. 8–12.
4. T. Koutsoukis and M.M. Makhlouf: AFS Transactions, 2015, paper no. 15-089.
5. A.L. Kearney: Properties of Cast Aluminum Alloys, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, vol. 2, ASM Handbook, ASM International, 1990, pp. 152–77.10.31399/asm.hb.v02.a0001062 ↗
6. D. Shechtman, R.J. Schaefer, and F.S. Biancaniello: Metall. Trans. A, 1984, vol. 15, pp. 1987-97.10.1007/BF02646833 ↗
7. Y. Du, Y.A. Chang, B.Y. Huang, W.P. Gong, Z.P. Jin, H.H. Xu, Z.H. Yuan, Y. Liu, Y.H. He, and F.Y. Xie: Mater. Sci. and Eng. A, 2003, vol. 363, pp. 140-51.10.1016/S0921-5093(03)00624-5 ↗
8. L.M. Rylands, D.M.J. Wilkes, W.M. Rainforth, and H. Jones: J. of Mater. Sci., 1994, vol. 29, pp. 1895-00.10.1007/BF00351310 ↗
9. A.J. McAlister and J.L, Murray: Bulletin of Alloy Phase Diagram, 1987, vol. 8, pp. 385-92.10.1007/BF02879428 ↗
10. Properties of Wrought Aluminum and Aluminum Alloys, Properties and Selection: Nonferrous Alloys and Special-Purpose Materials, ASM Handbook, vol. 2, ASM International, Materials Park, 1990, pp. 62–122.10.31399/asm.hb.v02.a0001060 ↗
11. M.F. Ashby: Oxide Dispersion Strengthening, Gordon and Breach, Science Publishers, New York, London, Pairs, 1966, pp. 143-212.
12. H.B. Smartt, L.K. Tu, and T.H. Courtney: Metall. Trans., 1971, vol. 2, pp. 2717-27.10.1007/BF02814917 ↗
13. B. Cantor and G.A. Chadwick: J. of Mater. Sci., 1975, vol. 10, pp. 578-88.10.1007/BF00566564 ↗
14. M.A. Meyers, K.K. Chawla, Mechanical Metallurgy: Principles and Applications, Paramus, Englewood Cliffs, NJ, 1984.
15. P.M. Kelly: Int. Metall. Rev., 1973, vol. 18, pp. 31-36.10.1179/imr.1973.18.1.31 ↗
16. S. Balanetskyy, G. Meisterernst, B. Grushko, and M. Feuerbacher: J. of Alloys and Comp., 2011, vol. 509, pp. 3795-05.10.1016/j.jallcom.2010.10.114 ↗
17. W.B. Pearson: Handbook of Lattice Spacing and Structures of Metals and Alloys Volume 2, Pergamon Press, Ottawa, 1967, pp. 122-23.
18. D.A. Porter and K.E. Easterling: Phase Transformation in Metals and Alloys, 3rd ed., CRC Press,Boca Raton, 2009.
19. D. Vaughan: Acta Metall., 1968, vol. 16, pp. 563-77.10.1016/0001-6160(68)90131-4 ↗
20. P.N.T. Unwin and R.B. Nicholson: Acta Metall., 1969, vol. 11, pp. 1379-93.10.1016/0001-6160(69)90155-2 ↗
21. C.T. Liu, C.L. White, and J.A. Horton: Acta Metall., 1985, vol. 33, pp. 213-29.10.1016/0001-6160(85)90139-7 ↗
22. H.J. Frost and M.F. Ashby: Deformation mechanism maps, Pergamon Press, Oxford, 1982.
23. A. Melander and P.A. Persson: Acta Metall., 1978, vol. 25, pp.267-78.10.1016/0001-6160(78)90127-X ↗