A Phenomenological Study of Weld Discontinuities and Defects in Resistance Spot Welding of Advanced High Strength TRIP Steel
Source abstract
Abstract
To obtain reliable resistance spot welds that guarantees their satisfactory mechanical performance and improved crashworthiness in the vehicle autobody, it is vital to study the causes, conditions, and welding parameters resulting in the formation of defects and discontinuities in the welds. This work studies the weld discontinuities and defects that are likely to occur in resistance spot welding of 1-GPa transformation-induced plasticity steel. The causes of the formation of weld discontinuities and defects are discussed here. It is found that the rich chemistry and complex thermomechanical processing and thus special thermophysical properties of the alloy have significant impacts on the susceptibility of the welds to defects. The amount of heat input induced by the welding process also plays an important role on the defect formation. From the ductility ratio results, it can be said that there are critical heat input and critical nugget size for occurrence of the weld discontinuities and defects. The susceptibility of the resistance spot welds of the experimental alloy to early expulsion, liquation cracking, surface breaking cracks and their consequences on weld quality and performance are discussed here.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. O. Kwon, K. Lee, G. Kim, and K.-G. Chin, Materials Science Forum, 2010, vol. 638, pp. 136-141.10.4028/www.scientific.net/MSF.638-642.136 ↗
2. R. Ashiri, M. A. Haque, C.-W. Ji, H. R. Salimijazi, and Y.-D. Park, Scripta Materialia, 2015, vol. 109, pp. 6-10.10.1016/j.scriptamat.2015.07.006 ↗
3. R. Ashiri, M. Shamanian, H. R. Salimijazi, M. A. Haque, J.-H. Bae, C.-W. Ji, K.-G. Chin, and Y.-D. Park, Scripta Materialia, 2016, vol. 114, pp. 41-47.10.1016/j.scriptamat.2015.11.027 ↗
4. R. Rana and S.B. Singh (eds.): Automotive steels, Design, Metallurgy, Processing and Applications, Woodhead Publishing, New York, 2017.
5. M. Takahashi, ISIJ International, 2015, vol. 55, pp. 79–88.10.2355/isijinternational.55.79 ↗
6. T. Waterschoot, K. Verbeken, and B. C. De Cooman, ISIJ International, 2006, vol. 46, pp. 138–146.10.2355/isijinternational.46.138 ↗
7. B. C. De Cooman,Y. Estrin, and S. K. Kim, Acta Materialia, 2018, vol. 142, pp. 283-362.10.1016/j.actamat.2017.06.046 ↗
8. Sh. Chen, R. Rana, A. Haldar, and R. K. Ray, Progress in Materials Science, 2017, vol. 89, pp. 345–391.10.1016/j.pmatsci.2017.05.002 ↗
9. O. Bouaziz, S. Allain, C. P. Scott, P. Cugy, and D. Barbier, Current Opinion in Solid State and Materials Science, 2011, vol. 15, pp. 141–168.10.1016/j.cossms.2011.04.002 ↗
10. H. K. D. H. Bhadeshia, ISIJ International, 2002, vol. 42, pp.1059–1060.10.2355/isijinternational.42.1059 ↗
11. H.E. Emre and R. Kacar: Welding J., 2016, vol. 95, pp. 77-s–85-s.
12. R. Rana, Canadian Metallurgical Quarterly, 2014, vol. 53, pp. 241-242.10.1179/0008443314Z.000000000178 ↗
13. R. Rana and C. Liu, Canadian Metallurgical Quarterly, 2014, vol. 53, pp. 300-316.10.1179/1879139514Y.0000000130 ↗
14. H. L. Yi, K. Y.Lee, J. H. Lim, H. K. D. H.Bhadeshia, Science and Technology of Welding and Joining, 2010, vol. 15, pp. 619-624.10.1179/136217110X12813393169778 ↗
15. G. S. Jung, K. Y. Lee, J. B. Lee, H. K. D. H. Bhadeshia, and D. W. Suh, Science and Technology of Welding and Joining, 2012, vol. 17, pp. 92-98.10.1179/1362171811Y.0000000081 ↗
16. H. K. D. H. Bhadeshia, Science and Technology of Welding and Joining, 2015, vol. 20, pp. 451-453.10.1179/15Z.000000000379 ↗
17. M. Pouranvari, and S. P. H. Marashi, Science and Technology of Welding and Joining, 2013, vol. 18, pp. 361-403.10.1179/1362171813Y.0000000120 ↗
18. B. Lang, D. Sun, Z. Z. Xuan, and X. F.Qin, ISIJ International, 2008, vol. 48, pp. 77-82.10.2355/isijinternational.48.77 ↗
19. T. Mira-Aguiar, I. Galvao, C. Leitao, and D. Rodrigues, Science and Technology of Welding and Joining, 2015, vol. 20, pp. 409-417.10.1179/1362171815Y.0000000031 ↗
20. Y. Zhang, J. Shen, and X. Lai, ISIJ International, 2012, vol. 52, pp. 493–498.10.2355/isijinternational.52.493 ↗
21. X. Wan,Y. Wang, and C. Fang, ISIJ International, 2014, vol. 54, pp. 1883–1889.10.2355/isijinternational.54.1883 ↗
22. X. Wang, Y. Zhang, J. Ju, J. Zhang, and J. Yang, Journal of Iron and Steel Research, International, 2016, vol. 23, pp. 1104-1110.10.1016/S1006-706X(16)30163-7 ↗
23. D. Zhao,Y. Wang, D. Liang, and P. Zhang, The International Journal of Advanced Manufacturing Technology, 2017, vol. 92, pp. 3043–3050.10.1007/s00170-017-0398-7 ↗
24. H. Gaul, S. Brauser, G. Weber, and M. Rethmeier, Welding in the World, 2011, vol. 55, pp. 99-106.10.1007/BF03321547 ↗
25. R. Ashiri, S. P. H. Marashi, and Y.-D. Park, Welding Journal, 2018, vol. 97, pp. 157-169.10.29391/2018.97.014 ↗
26. J. M. Sawhill and S. T. Furr, Welding Journal, 1984, vol. 63, pp. 203-212.
27. A. K. De, J. G. Speer, and D. Matlock, Advanced Materials and Processes, 2003, vol. 161, pp. 27-30.
28. SWANTEC Software and Engineering ApS: Sorpas Version 13.1, User Manual, Kgs. Lyngby, Denmark, 2008.
29. Q. L. Cui, D. Parkes, D. Westerbaan, S. S. Nayak, Y. Zhou, D. C. Saha, D. Liu, F. Goodwin, S. Bhole, and D. L. Chen, Journal of Materials Engineering and Performance, 2017, vol. 26, pp. 783–791.10.1007/s11665-016-2454-0 ↗
30. B. A. Graville, 1975. The principles of cold cracking control in welds. Dominion Bridge Co., Montreal.
31. J.-P. Kong, and C.-Y. Kang, Science and Technology of Welding and Joining, 2016, vol. 21, pp. 32-42.10.1179/1362171815Y.0000000057 ↗
32. G. Dieter, 1988. Mechanical Metallurgy, McGraw-Hill, New York.
33. F. J. Humphreys and M. Hatherly, 2004, Recrystallization and Related Annealing Phenomena, Elsevier, New York.
34. H. Ghassemi-Aramaki, E. Biro and S. Sadagopan, ISIJ International, 2017, vol. 57, pp. 1451–1460.10.2355/isijinternational.ISIJINT-2016-649 ↗
35. H. Ghassemi-Aramaki, S. Bhat, S. Kelley and S. Sadagopan, Welding Journal, 2017, vol. 96, pp. 104–112.
36. D. C. Saha, I. S. Chang, and Y.-D. Park, Materials Characterization, 2014, vol. 93, pp. 40-51.10.1016/j.matchar.2014.03.016 ↗
37. H. Zhang, J. Senkara, and X. Wu, Journal of Manufacturing Science and Engineering, 2001, vol. 124, pp. 79-85.10.1115/1.1418693 ↗