Al/Cu Dissimilar Friction Stir Welding with Ni, Ti, and Zn Foil as the Interlayer for Flow Control, Enhancing Mechanical and Metallurgical Properties
Source abstract
Abstract
This research investigates the effects of Ni, Ti, and Zn foil as interlayer, inserted between the faying edges of Al and Cu plates, for controlled intermetallic compound (IMC) formation. The weld tensile strength with Ti and Zn as interlayer is superior to Al base metal strength. This is due to controlled flow of IMCs by diffused Ti interlayer and thin, continuous, and uniform IMC formation in the case of Zn interlayer. Improved flexural stress was observed with interlayer. Weld microhardness varied with different interlayers and purely depends on IMCs present at the indentation point, flow of IMCs, and interlayer hardness. Specimens with interlayer failed at the interface of the nugget and thermomechanical-affected zone (TMAZ) with complete and broken three-dimensional (3-D) grains, indicating transgranular fracture. Phase analysis revealed that Al/Cu IMCs are impeded by Ni and Ti interlayer. The minor binary and ternary IMC phases form adjacent to the interlayer due to diffusion of the material with Al/Cu. Line scan and elemental mapping indicate thin, continuous, and uniform IMCs with enhanced weld metallurgical and mechanical properties for the joints with Zn interlayer. Macrostructural analysis revealed IMC flow variations with and without interlayer. Variation in grain size at different zones is also observed for different interlayers.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Advanced Welding Techniques Analysis · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (21)
Show source-provided references
1. B. Kuang, Y. Shen, W. Chen, X. Yao, H. Xu, J. Gao, and J. Zhang: Mater. Des., 2015, vol. 68, pp. 54–62.10.1016/j.matdes.2014.12.008 ↗
2. M. Akbari, P. Bahemmat, M. Haghpanahi, and M.K.B. Givi: Sci. Technol. Weld. Join., 2013, vol. 18 (6), pp. 518–24.10.1179/1362171813Y.0000000130 ↗
3. R. Balasundaram, V.K. Patel, S.D. Bhole, and D.L. Chen: Mater. Sci. Eng. A, 2014, vol. 607, pp. 277–86.10.1016/j.msea.2014.03.135 ↗
4. R.S. Mishra and Z.Y. Ma: Mater. Sci. Eng. R, 2005, vol. 50, pp. 1–78.10.1016/j.mser.2005.07.001 ↗
5. P. Xue, D.R. Ni, D. Wang, B.L. Xiao, and Z.Y. Ma: Mater. Sci. Eng. A, 2011, vol. 528, pp. 4683–89.10.1016/j.msea.2011.02.067 ↗
6. S.G. Shiri, A. Sarani, S.R.E. Hosseini, and G. Roudini: J. Mater. Sci. Technol., 2013, vol. 29 (11), pp. 1091–95.10.1016/j.jmst.2013.07.003 ↗
7. M. Aonuma and K. Nakata: Mater. Sci. Eng. B, 2009, vol. 161, pp. 46–49.10.1016/j.mseb.2009.02.020 ↗
8. J. Zhang, G. Luo, Y. Wang, Q. Shen, and L. Zhang: Mater. Lett., 2012, vol. 83, pp. 189–91.10.1016/j.matlet.2012.06.014 ↗
9. P. Xue, B.L. Xiao, D.R. Ni, and Z.Y. Ma: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5723–27.10.1016/j.msea.2010.05.061 ↗
10. W. Chang, S.R. Rajesh, C. Chun, and H. Kim: J. Mater. Sci. Technol., 2011, vol. 27 (3), pp. 199–204.10.1016/S1005-0302(11)60049-2 ↗
11. J. Kandasamy, M.M. Hussain, and S. Rajesham: Mater. Manuf. Proc., 2012, vol. 27, pp. 1429–36.10.1080/10426914.2012.709340 ↗
12. M. Aonuma and K. Nakata: Mater. Sci. Eng. B, 2010, vol. 173, pp. 135–38.10.1016/j.mseb.2009.12.015 ↗
13. P.K. Sahu, S. Pal, S.K. Pal, and R. Jain: J. Mater. Process. Technol., 2016, vol. 235, pp. 55–67.10.1016/j.jmatprotec.2016.04.014 ↗
14. A.O. Al-Roubaiy, S.M. Nabat, and A.D.L. Batako: Int. J. Adv. Manuf. Technol., 2014, vol. 71, pp. 1631–42.10.1007/s00170-013-5563-z ↗
15. C.J. Hsu, C.Y. Chang, P.W. Kao, N.J. Ho, and C.P. Chang: Acta Mater., 2006, vol. 54, pp. 5241–49.10.1016/j.actamat.2006.06.054 ↗
16. P. Carlone, A. Astarita, G.S. Palazzo, V. Paradiso, and A. Squillace: Int. J. Adv. Manuf. Technol., 2015, vol. 79, pp. 1109–16.10.1007/s00170-015-6874-z ↗
17. C.W. Tan, Z.G. Jiang, L.Q. Li, Y.B. Chen, and X.Y. Chen: Mater. Des., 2013, vol. 51, pp. 466–73.10.1016/j.matdes.2013.04.056 ↗
18. V. Firouzdor and S. Kou: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 303–15.10.1007/s11661-011-0822-9 ↗
19. ASM Handbook, vol. 3, Alloy Phase Diagrams, ASM International, Materials Park, OH, 1992.
20. J. Zhang, G. Luo, Y. Wang, Y. Xiao, Q. Shen, and L. Zhang: J. Alloys Compds., 2013, vol. 556, pp. 139–42.10.1016/j.jallcom.2012.12.106 ↗
21. J. Grammatikakis, K. Eftaxias, and V. Hadjicontis: J. Phys. Chem. Solids, 1988, vol. 49 (10), pp. 1275–77.10.1016/0022-3697(88)90186-2 ↗