Density, Molar Volume, and Surface Tension of Liquid Al-Ti
Source abstract
Abstract
Al-Ti-based alloys are of enormous technical relevance due to their specific properties. For studies in atomic dynamics, surface physics and industrial processing the precise knowledge of the thermophysical properties of the liquid phase is crucial. In the present work, we systematically measure mass density, ρ (g cm−3), and the surface tension, γ (N m−1), as functions of temperature, T, and compositions of binary Al-Ti melts. Electromagnetic levitation in combination with the optical dilatometry method is used for density measurements and the oscillating drop method for surface tension measurements. It is found that, for all compositions, density and surface tension increase linearly upon decreasing temperature in the liquid phase. Within the Al-Ti system, we find the largest values for pure titanium and the smallest for pure aluminum, which amount to ρ(L,Ti) = 4.12 ± 0.04 g cm−3 and γ(L,Ti) = 1.56 ± 0.02 N m−1; and ρ(L,Al) = 2.09 ± 0.01 g cm−3 and γ(L,Al) = 0.87 ± 0.06 N m−1, respectively. The data are analyzed concerning the temperature coefficients, ρ T and γ T, excess molar volume, V E, excess surface tension, γ E, and surface segregation of the surface active component, Al. The results are compared with thermodynamic models. Generally, it is found that Al-Ti is a highly nonideal system.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Solidification and crystal growth phenomena · Thermodynamic and Structural Properties of Metals and Alloys · nanoparticles nucleation surface interactions
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (59)
Show source-provided references
1. I. Egry, R. Brooks, D. Holland-Moritz, R. Novakovic, T. Matsushita, E. Ricci, S. Seetharaman, R. Wunderlich, D. Jarvis, Int. J. Thermophys. 2007 vol. 28, pp. 1026-103610.1007/s10765-007-0219-6 ↗
2. Y.V. Naidich, Prog. Surf. Membr. Sci. 1981, vol. 14, pp. 353-48410.1016/B978-0-12-571814-1.50011-7 ↗
3. J.P. Garandet, B. Vinet, P. Gros, J. Colloid, Interf. Sci. 1994, vol. 165, pp, 351-35410.1006/jcis.1994.1240 ↗
4. E. Gebhardt, M. Becker, S. Dorner, Aluminium 1955, vol. 31, pp. 315-321
5. W. Coy, R. Mateer, Trans Amer. Soc. Metals, 1955, vol. 58, pp. 99 - 102
6. E. Levin, G. Ayushina, P. Geld, High Temp. 1968, vol. 6 pp. 416-418
7. A. Yatsenko,V. Kononenko, A. Sukhman, High Temp. 1972, vol. 10, pp. 55
8. P. Smith, J. Elmer, G. Gallegos, Scripta Mat. 1999, vol. 40, pp. 937 - 94110.1016/S1359-6462(99)00043-3 ↗
9. P. Nasch, S.G Steinemann, Phys. Chem. Liq. 1995, vol. 29, pp. 43-5810.1080/00319109508030263 ↗
10. K. Mills: Recommended values of thermophysical properties for selected commercial alloys. Woodhead, Cambridge, 2002.10.1533/9781845690144 ↗
11. M. Assael, R. Banish, J. Brillo, I. Egry, R. Brooks, P. Quested, K. Mills, A. Nagashima, Y. Sato, W. Wakeham, J. Phys. Chem. Ref. Data, 2006, vol. 35, pp. 285-30010.1063/1.2149380 ↗
12. T. Ishikawa, P. Paradis, J. Electron. Mater. 2005, vol. 34, pp. 1526-153210.1007/s11664-005-0160-z ↗
13. P. Paradis, T. Ishikawa, S. Yoda, Adv. Space Res. 2008, vol. 41, pp. 2118 - 212510.1016/j.asr.2007.06.032 ↗
14. G. Pottlacher: High Temperature Thermophysical Properties of 22 Pure Metals, Edition Keiper, Graz, 2009.
15. V.P. Elyutin, M.A. Maurakh: Izv. A.N., O.T.N. (USSR) 1955, vol. 6, pp. 129–31.
16. V. Arkhipkin, A. Agaev, G. Grigorev, V. Kostikov, Ind. Lab. 1973, vol. 39, pp. 129–31
17. T. Ishikawa, P. Paradis, T. Itami, S. Yoda, J. Chem. Phys. 2003, vol. 118, pp. 7912-792010.1063/1.1564050 ↗
18. B. Vinet, L. Magnusson, H. Fredriksson, P. Desre, J. Colloid Interface Sci. 2002, vol. 255, pp. 363–37410.1006/jcis.2002.8627 ↗
19. K. Man, Int. J. Thermophys. 2000, vol. 21, pp. 793–80410.1023/A:1006601821432 ↗
20. J. Tiele, J. Kelly, Brit. J. Appl. Phys. 1963, vol. 14, pp. 717–71910.1088/0508-3443/14/10/332 ↗
21. B. Allen, Trans. Metall. Soc. AIME 1963, vol. 227, pp. 1175–1183
22. A.W. Peterson, H. Kedesdy, P.H. Keck, E. Schwarz, J. Appl. Phys. 1958, vol. 28, pp. 213-21610.1063/1.1723069 ↗
23. G. Kuppermann: The Determination of the Surface Tension with the Help of the Levitated Reciprocating Drop Under Terrestrial Conditions and in Space. Dissertation Technology University of Berlin, 2000.
24. J. Brillo: Thermophysical properties of multicomponent liquid alloys, Walter de Gruyter GmbH, Berlin/Boston, 2016.10.1515/9783110468991 ↗
25. R. Novakovic, D. Giuranno, E. Ricci, A. Tuissi, R. Wunderlich, H.J. Fecht, I. Egry, Appl. Surf. Sci. 2012, vol. 258, pp. 3269–327510.1016/j.apsusc.2011.11.080 ↗
26. S. Amore, S. Delsante, H. Kobatake, J. Brillo, J. Chem. Phys. 2013, vol. 139, p. 06450410.1063/1.4817679 ↗
27. S. Amore, J. Brillo, R. Novakovic, I. Egry, Appl. Surf. Sci. 2011, vol. 257, pp. 7739–7745.10.1016/j.apsusc.2011.04.019 ↗
28. Y. Plevachuk, I. Egry, J. Brillo, D. Holland-Moritz, I. Kaban, Int J Mat Res. 2007, vol. 98, pp. 107–11110.3139/146.101447 ↗
29. I. Egry, J. Brillo, D. Holland-Moritz, Y. Plevachuk, Mat. Sci. Eng. 2008, vol. A 495, pp. 14- 18.10.1016/j.msea.2007.07.104 ↗
30. J. Brillo, I. Egry, J. Westphal, Int. J. Mat. Res. 2008, vol. 99, pp. 162-16710.3139/146.101623 ↗
31. J. Schmitz, J. Brillo, I. Egry, R. Schmid-Fetzer, Int. J. Mat. Res. 2010, vol. 100, pp. 1529-153510.3139/146.110221 ↗
32. J. Brillo, R. Brooks, I. Egry, P. Quested, High Temp.-High Press. 2008, vol. 37, pp. 371–381
33. J. Brillo, Y. Plevachuk, I. Egry, J Mater Sci 2010, vol. 45, pp. 5150–515710.1007/s10853-010-4512-6 ↗
34. H.L. Peng, T. Voigtmann, G. Kolland, H. Kobatake, J. Brillo, Phys. Review 2015, vol. B 92, pp. 184201-1 - 184201-13
35. J. Brillo, G. Kolland, J. Mat. Sci. 2016, vol. 51, pp. 4888-490110.1007/s10853-016-9794-x ↗
36. J. Schmitz, B. Hallstedt, J. Brillo, I. Egry, M. Schick, J. Mater. Sci. 2012, vol. 47, pp. 3706–371210.1007/s10853-011-6219-8 ↗
37. H. Kobatake, J. Brillo, J. Schmitz, P. Pichon, J. Mater. Sci. 2015, vol. 50, pp. 3351–336010.1007/s10853-015-8883-6 ↗
38. H. Kobatake, J. Schmitz, J. Brillo. J. Mater. Sci. 2014, vol. 49, pp. 3541–354910.1007/s10853-014-8072-z ↗
39. J.A.V. Butler, Proc. R. Soc. 1932, vol. A135, pp. 348–37410.1098/rspa.1932.0040 ↗
40. G. Kaptay, Calphad 2008, vol. 32, pp. 338–35210.1016/j.calphad.2007.10.002 ↗
41. T. Tanaka, T. Iida, Steel Res. 1994, vol. 65, pp. 21–2810.1002/srin.199400921 ↗
42. T. Tanaka, K. Hack, T. Iida, S. Hara, Z. Metallkd. 1996, vol. 87, pp. 380-389
43. G. Kaptay, Langmuir 2015, vol. 31, pp. 5796–580410.1021/acs.langmuir.5b00217 ↗
44. P. Wynblatt, A. Saul, D. Chatain, Acta Mater 1998, vol. 46, pp. 2337–234710.1016/S1359-6454(98)80015-3 ↗
45. C. Antion, D. Chatain, Surf. Sci. 2007, vol. 10, pp. 2232–224410.1016/j.susc.2007.03.026 ↗
46. I. Egry, J. Brillo, High Temperatures – High pressures 2013, vol. 42, pp. 59-68
47. J. Brillo, G. Lohöfer, F. Schmidt-Hohagen, S. Schneider, I. Egry, Int. J. Materials and Product Technology 2006, vol. 26, pp. 247-27310.1504/IJMPT.2006.009469 ↗
48. W. Wien, Philos. Magaz. 1897, vol. 5, pp. 214–22010.1080/14786449708620983 ↗
49. S. Krishnan, G.P. Hansen, R.H. Hauge, J.L. Margrave, High Temp. Sci. 1990, vol. 29, pp. 17- 52
50. V. Witusiewicz, A.A. Bondar, U. Hecht, S. Rex, T. Velikanova, J. All. and Comp. 2008, vol. 465, pp. 64–7710.1016/j.jallcom.2007.10.061 ↗
51. J. Brillo, I. Egry, Int. J. Thermophys. 2003, vol. 24, pp. 1155-1170.10.1023/A:1025021521945 ↗
52. D.L. Cummings, D.A. Blackburn, J. Fluid Mech. 1991, vol. 224, pp. 395-41610.1017/S0022112091001817 ↗
53. P. Paradis, W.K. Rhim, J. Chem. Thermodynamics 2000, vol. 32, pp. 123–13310.1006/jcht.1999.0576 ↗
54. JM. Molina, R. Voytovych, E. Louis, N. Eustathopoulos, Int J Adh Adhesives 2007, vol. 27, pp. 394–40110.1016/j.ijadhadh.2006.09.006 ↗
55. H. Ellingham, J. Soc. Chem. Ind. 1944, vol. 63, pp. 125 - 13310.1002/jctb.5000630501 ↗
56. N. Eustathopoulos, B. Drevet, J Crys Growth 2013, vol. 371, pp. 77–8310.1016/j.jcrysgro.2013.02.010 ↗
57. L. N. Belyanchikov, Elektrometallurgiya 2009, vol. 11, pp. 25-32
58. I. Egry, D. Holland-Moritz, R. Novakovic, E. Ricci, R. Wunderlich, N. Sobczak, Int. J. Thermophys. 2010, vol. 31, pp. 949–96510.1007/s10765-010-0704-1 ↗
59. R. Nowak, T. Lanata, N. Sobczak, E. Ricci, D. Giuranno, R. Novakovic, D. Holland-Moritz, I. Egry, J. Mater. Sci. 2010, vol. 45, pp. 1993–200110.1007/s10853-009-4061-z ↗