journal article·2011-05

Microstructure and Mechanical Properties in Hot-Rolled Extra High-Yield-Strength Steel Plates for Offshore Structure and Shipbuilding

Dongsheng Liu, Qingliang Li, Toshihiko Emi

Publisher page

Abstract

Key parameters for a thermomechanically controlled processing and accelerated cooling process (TMCP-AcC) were determined for integrated mass production to produce extra high-yield-strength microalloyed low carbon SiMnCrNiCu steel plates for offshore structure and bulk shipbuilding. Confocal scanning microscopy was used to make in-situ observations on the austenite grain growth during reheating. A Gleeble 3800 thermomechanical simulator was employed to investigate the flow stress behavior, static recrystallization (SRX) of austenite, and decomposition behavior of the TMCP conditioned austenite during continuous cooling. The Kocks–Mecking model was employed to describe the constitutive behavior, while the Johnson–Mehl–Avrami–Kolmogorov (JMAK) approach was used to predict the SRX kinetics. The effects of hot rolling schedule and AcC on microstructure and properties were investigated by test-scale rolling trials. The bridging between the laboratory observations and the process parameter determination to optimize the mass production was made by integrated industrial production trials on a set of a 5-m heavy plate mill equipped with an accelerated cooling system. Successful production of 60- and 50-mm-thick plates with yield strength in excess of 460 MPa and excellent toughness at low temperature (213 K (–60 °C)) in the parent metal and the simulated coarse-grained heat affected zone (CGHAZ) provides a useful integrated database for developing advanced high-strength steel plates via TMCP-AcC.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metallurgy and Material Forming · Metal Alloys Wear and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. I.V. Gorynin, V.V. Rybin, V.A. Malyshevskii, and E.I. Khlusova: Met. Sci. Heat Treatment, 2007, vol. 49, pp. 3–9.10.1007/s11041-007-0001-1 ↗
2. K. Ichimiya, H. Sumi, and T. Hirai: JFE Techn. Rep., 2008, June 11, pp. 7–12.
3. W. Schütz and F. Schröter: Mater. Sci. Technol., 2005, vol. 21, pp. 590–96.10.1179/174328405X38339 ↗
4. N.A. McPherson: Ironmaking and Steelmaking, 2009, vol. 36, pp. 193–200.10.1179/174328109X401541 ↗
5. Y. Nagai, H. Inoue, T. Nakashima, T. Adachi, H. Fukami, A. Date, and A. Kojima: Nippon Steel Techn. Rep., 2004, July, No. 90, pp. 14–19.
6. Det Norske Veritas Standard: Rules for Classification of Ships/High Speed, Light Craft and Naval Surface Craft on Metallic Materials, Hovik, Norway, 2007, pp.17–26.
7. H. Yin, K. Blazek, and O. Lanzi: ISIJ Int., 2009, vol. 49, pp. 1561–67.10.2355/isijinternational.49.1561 ↗
8. N. Kikuchi, S. Nabeshima, Y. Kishimoto, T. Matsushita, and S. Sridhar: ISIJ Int., 2007, vol. 47, pp. 1255–64.10.2355/isijinternational.47.1255 ↗
9. H. Chikama, H. Shibata, T. Emi, and M. Suzuki: Mater. Trans. JIM, 1996, vol. 37, pp. 620–26.10.2320/matertrans1989.37.620 ↗
10. ASTM Standard Designation E112-88, 1994 Annual Book of ASTM Standards, ASTM, Philadelphia, PA, 1994, vol. 3.01, p. 227.
11. A. Giumelli, M. Militzer, and E.B. Hawbolt: ISIJ Int., 1999, vol. 39, pp. 271–80.10.2355/isijinternational.39.271 ↗
12. D. Liu, F. Fazeli, M. Militzer, and W.J. Poole: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 894–909.10.1007/s11661-007-9116-7 ↗
13. M. Shome and O.N. Mohanty: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2159–69.10.1007/BF02586136 ↗
14. K. Banerjee and U.K. Chatterjee: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1297–309.10.1007/s11661-003-0241-7 ↗
15. D. Liu, F. Fazeli, and M. Militzer: ISIJ Int., 2007, vol. 47, pp. 1789–98.10.2355/isijinternational.47.1789 ↗
16. S. Sarkar and M. Militzer: Mater. Sci. Technol., 2009, vol. 25, pp. 1134–46.10.1179/174328409X453271 ↗
17. M. Militzer and Y. Brechet: Metall. Mater. Trans. A, 2009, vol. 40A, pp. 2273–82.10.1007/s11661-009-9926-x ↗
18. H.J. Frost and M.F. Ashby: Deformation Mechanism Maps, Pergamon Press, Oxford, United Kingdom, 1982.
19. U.F. Kocks and H. Mecking: Prog. Mater. Sci., 2003, vol. 48, pp. 171–273.10.1016/S0079-6425(02)00003-8 ↗
20. M. Avrami: J. Chem. Phys., 1940, vol. 8, pp. 212–24.10.1063/1.1750631 ↗
21. M. Militzer, E.B. Hawbolt, and T.R. Meadowcroft: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 1247–59.10.1007/s11661-000-0120-4 ↗
22. R.Y. Zhang and J.D. Boyd: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1448–59.10.1007/s11661-010-0190-x ↗
23. S.Y. Han, S.Y. Shin, S. Lee, N.J. Kim, J.H. Bae, and K. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 329–40.10.1007/s11661-009-0135-4 ↗
24. S.Y. Han, S.Y. Shin, C.H. Seo, H. Lee, J.H. Bae, and K. Kim: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 1851–62.
25. M. Jonsson: ISIJ Int., 2006, vol. 46, pp. 1192–99.10.2355/isijinternational.46.1192 ↗
26. M. Dubois, A. Moreau, M. Militzer, and J.F. Bussiére: Scripta Mater., 1998, vol. 39, pp. 735–41.10.1016/S1359-6462(98)00179-1 ↗
27. A. Smith, S.E. Kruger, J. Sietsma and S. van der Zwaag: ISIJ Int., 2006, vol.46, pp. 1223–32.10.2355/isijinternational.46.1223 ↗
28. C. Capdevila, F.G. Caballero and, C. De Andrés Carcía: ISIJ Int., 2002, vol. 42, pp. 894–902.10.2355/isijinternational.42.894 ↗
29. Y.K. Lee: J. Mater. Lett., 2002, vol. 21, pp. 1253–55.10.1023/A:1016555119230 ↗
30. B. de Meester: ISIJ Int., 1997, vol. 37, pp. 537–51.10.2355/isijinternational.37.537 ↗
31. C. Miao, C. Shang, K. Wang, L. Zhang, and S. Mani: Acta Metall. Sinica, 2010, vol. 46, pp. 541–46.10.3724/SP.J.1037.2009.00803 ↗
32. R. Denys: Rev. Soudure, 1994, no. 1, pp. 26–39.10.4098/AT.arch.94-41 ↗