journal article·2013-07Open access

Comparison Between Ultrasonic Vibration-Assisted Upsetting and Conventional Upsetting

Yanxiong Liu, Sergey Suslov, Qingyou Han, Lin Hua, Clause Xu

Abstract

Ultrasonic vibration has been increasingly applied to metal forming processes due to its beneficial effects on the reduction of the forming force, flow stress, and friction coefficient and on the increase of the forming limit of the sheet metal. In this work, the effect of the ultrasonic vibration on the upsetting has been studied experimentally and numerically. The microstructure of the specimens processed with ultrasonic vibration-assisted upsetting (UAU) and conventional upsetting was characterized. Differences in the forming characteristics between these two methods, in terms of metal flow and forming force, were analyzed. The results of this study indicate that the use of high-intensity ultrasonic vibration can induce severe plastic deformation and improve the grain refinement efficiency. The grains of the specimens processed by the UAU process were refined to 100 to 300 nm. A deformation mechanism of the UAU process was proposed. The grain refinement mechanism was used to explain the reason why ultrasonic vibration can be used to improve the grain refinement efficiency of the upsetting process.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and mechanical properties · Metal Forming Simulation Techniques · Metallurgy and Material Forming

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (53)

Show source-provided references
1. Y. Daud, M. Lucas, and Z. Huang: Ultrasonics, 2006, vol. 44, pp. 511-15.10.1016/j.ultras.2006.05.116 ↗
2. Y. Daud, M. Lucas, and Z. Huang: J. Mater. Process. Technol., 2007, vol.186, pp.179-87.10.1016/j.jmatprotec.2006.12.032 ↗
3. Z. Huang, M. Lucas, and M. J. Adams: Ultrasonics. 2002, vol.40, pp.43-50.10.1016/S0041-624X(02)00245-7 ↗
4. J.C. Hung and C. Huang: Ultrasonics, 2005, vol. 43, pp. 692–70.10.1016/j.ultras.2005.03.001 ↗
5. M. Murakawa and M. Jin: J. Mater. Process. Technol., 2001, vol.113, pp.81-90.10.1016/S0924-0136(01)00635-5 ↗
6. C. Bunget and G. Naile: Ultrasonics, 2011, vol.51, pp.606-17.10.1016/j.ultras.2011.01.001 ↗
7. T. Jimma, Y. Kasuga, and N. Iwaki: J. Mater. Process. Technol., 1998, vol.80-81, pp.406-12.10.1016/S0924-0136(98)00195-2 ↗
8. Y. Ashida and H. Aoyama: J. Mater. Process. Technol., 2007, vol.187–188, pp.118-26.10.1016/j.jmatprotec.2006.11.174 ↗
9. K.C. Oliver, C. Hansen, and P. Knoll: Ultrasonics, 2004, vol.42, pp.989-96.10.1016/j.ultras.2003.12.017 ↗
10. A.E. Eaves, A.W. Smith, W.J. Waterhouse, and D.H. Sansome: Ultrasonics, 1975, vol.7, pp.162-69.10.1016/0041-624X(75)90085-2 ↗
11. D. Ensminger and F.B. Stulen: Ultrasonics-Data, Equations, and Their Practical Uses, 2nd ed., CRC Press, New York, 2009, p. 620.
12. E.G. Shvidkovshii, N.A. Tyapunina, and E.P. Belozerova: Kristallografiya, 1962, vol.473, pp.7-15.
13. E.P. Belozerova, N.A. Tyapunina, and E.G. Shvidkovskii: Kristallograifya, 1963, vol.232, pp.8-16.
14. I.G. Polotskii, D.E. Ovsienko, and E.L. Khodov: Met Metalloved, 1967, vol.744, pp.23-31.
15. I.G. Polotskii, G.I. Prokopenko, and V.I. Trefilov: Tverd Tela, 1969, vol.155, pp.11-21.
16. O.V. Abramov: in High-Intensity Ultrasonics: Theory and Industrial Applications, Kurnakov Institute of General and Inorganic Chemistry, Moscow, 1998, p. 98.
17. B. Langenecker: IEEE Trans. Sonics Ultrasonics 1966, vol. 13, pp. 1–8.10.1109/T-SU.1966.29367 ↗
18. A.V. Kulemin: Ultrasound and Diffusion in Metals, Metallurgiya, Moscow, 1978.
19. Y. Liu, S. Sergey, Q. Han, L. Hua, and C. Xu : Mater. Lett., 2012, vol.67, pp.52-55.10.1016/j.matlet.2011.08.086 ↗
20. R. Folk, G. Fox, C. A. Shook, and C. W. Curtis: J Acoust. Soc. Am., 1958, vol.30, pp.552-58.10.1121/1.1909682 ↗
21. S.A.A. Mousavi, H. Feizi, and R. Madoliat: J Mater. Process. Technol., 2007, vol.187-188, pp.657-67.10.1016/j.jmatprotec.2006.11.168 ↗
22. Y. Liu, Q. Han, and L. Hua: in Light Metals 2012, C.E. Suarez, ed., TMS, Orlando, 2012, p. 259.10.1007/978-3-319-48179-1_45 ↗
23. M.L. Wilkins and M.W. Guinan: J Appl. Phys., 1973, vol.44, pp.1200-06.10.1063/1.1662328 ↗
24. M.A. Meyers: Dynamic Behavior of Materials, Wiley-Interscience, New York, 1994, pp. 80-91.10.1002/9780470172278 ↗
25. R. Truel, C. Elbaum, and B. Chick: Ultrasonics in Solid-State Physics. Moscow: Mir; 1972.
26. R. Vepa: Dynamics of smart structures, p546, Wiley, West Sussex,2010.10.1002/9780470710623 ↗
27. B. Langenecker, W.H. Frandsen, and A. Kennedy: Tech. Prog. Rep., 1963, vol.371, pp.12-18.
28. I. Kristoffy: J Eng. Ind., 1969, vol.1168, pp.1174-86.
29. A.G. Rozner: J Acoust. Soc. Am., 1970, vol.49, pp.1368-78.10.1121/1.1912511 ↗
30. M.J. Adams, B.J. Briscoe, and S.K. Sinha: Philos. Mag., 1996, vol. 74, pp. 1225-35.10.1080/01418619608239722 ↗
31. G. Liu, J Lu, and K. Lu: Mater. Sci. Eng. A., 2000, vol.286, pp.91-101.10.1016/S0921-5093(00)00686-9 ↗
32. Y.V.R.K. Prasad and K.P. Rao: Mater. Sci. Eng. A. 2004, vol.374, pp.335-45.10.1016/j.msea.2004.03.007 ↗
33. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer, and Y.T. Zhu: JOM, 2006, vol.4, pp.33-40.10.1007/s11837-006-0213-7 ↗
34. R.Z. Valiev and T.G. Langdon: Prog. Mater. Sci. 2006, vol.51, pp.881-981.10.1016/j.pmatsci.2006.02.003 ↗
35. B. Bay, N. Hansen, D.A. Hughes, and D. Kuhlmann-Wilsdorf: Acta Metall. Mater., 1992, vol.40, pp.205-15.10.1016/0956-7151(92)90296-Q ↗
36. V.F. Nesterenko, M.A. Meyers, and J.C. Lasalvia: Mater. Sci. Eng. A. 1997, vol.229, pp.23-36.10.1016/S0921-5093(96)10847-9 ↗
37. D.A. Hughes and N. Hansen: Acta Mater., 1997, vol.45, pp. 3871-82.10.1016/S1359-6454(97)00027-X ↗
38. D.A. Hughes and N. Hansen: Acta Mater., 2000, vol.48, pp. 2985-97.10.1016/S1359-6454(00)00082-3 ↗
39. M.A. Meyers, V.F. Nesterenko, J.C. LaSalvia, and Q. Xue: Mater. Sci. Eng. A. 2001, vol.317, pp.204-18.10.1016/S0921-5093(01)01160-1 ↗
40. A. Mishra, B.K. Kad, F. Gregori, and M.A. Meyers: Acta Mater., 2007, vol.55, pp.13-27.10.1016/j.actamat.2006.07.008 ↗
41. Y. Iwahashi, Z. Horita, M. Nemoto, and T.G. Langdon: Acta Mater., 1998, vol.46, pp.3317-28.10.1016/S1359-6454(97)00494-1 ↗
42. J.G. Sevillano, P.V. Houtte, and E. Aernoudt: Prog. Mater. Sci., 1981, vol.25, pp.69-81.10.1016/0079-6425(80)90001-8 ↗
43. D.A. Hughes, R.A. Lebensohn, H.R. Wenk, and A. Kumar: Proc. R. Soc. Lond. A., 2000, vol.456, pp. 921-28.10.1098/rspa.2000.0543 ↗
44. D. Kuhlmann-Wilsdorf and N. Hansen: Scripta Metall. Mater., 1991, vol.25, pp.1557-63.10.1016/0956-716X(91)90451-6 ↗
45. Q. Liu and N. Hansen: Scripta Metall Mater., 1995, vol.32, pp.1289-95.10.1016/0956-716X(94)00019-E ↗
46. D.A. Hughes, D.C. Chrzan, Q. Liu, and N. Hansen: Phys. Rev. Lett., 1998, vol.81, pp.4664-70.10.1103/PhysRevLett.81.4664 ↗
47. R.B. Lindsay: Mechanical Radiation, p586, McGraw-Hill, New York, 1960.
48. K. H. Westmacott and B. Langenecker: J. Phys. Rev. Lett., 1965, vol.14, pp.221-22.10.1103/PhysRevLett.14.221 ↗
49. B.B. Rath and H. Hu: in Nature and Behavior of Grain Boundaries, H. Hu, ed., TMS Publication, Detroit, 1972, p. 405.
50. J.S. Koehler: Imperfections in Nearly Perfect Crystals, p231, CRC Press, New York, 1952.
51. A. Granato and K. Lucke: J. Appl. Phys., 1956, vol. 27, pp. 583-94.10.1063/1.1722436 ↗
52. B.Y. Pines and I.F. Omel: Dynamics of Dislocations, Proceedings of Finite, SSR, Khar’kov, 1968.
53. B. Langenecker: Rev. Sci. Instr., 1966, vol.37, pp.103-10.10.1063/1.1719922 ↗