journal article·2011-02

Review of Environmentally Assisted Cracking

K. Sadananda, A. K. Vasudevan

Publisher page

Abstract

Many efforts have been made in the past by several researchers to arrive at some unifying principles governing the embrittlement phenomena. An inescapable conclusion reached by all these efforts was that the behavior is very complex. Hence, recognizing the complexity of material/environment behavior, we focus our attention here only in extracting some similarities in the experimental trends to arrive at some generic principles of behavior. Crack nucleation and growth are examined under static load in the presence of internal and external environments. Stress concentration, either pre-existing or in-situ generated, appears to be a requirement for embrittlement. A chemical stress concentration factor is defined for a given material/environment system as the ratio of failure stress with and without the damaging chemical environment. All factors that affect the buildup of the required stress concentration, such as planarity of slip, stacking fault energy, etc., also affect the stress-corrosion behavior. The chemical stress concentration factor is coupled with the mechanical stress concentration factor. In addition, generic features for all systems appear to be (a) an existence of a threshold stress as a function of concentration of the damaging environment and flow properties of the material, and (b) an existence of a limiting threshold as a function of concentration, indicative of a damage saturation for that environment. Kinetics of crack growth also depends on concentration and the mode of crack growth. In general, environment appears to enhance crack tip ductility on one side by the reduction of energy for dislocation nucleation and glide, and to reduce cohesive energy for cleavage, on the other. These two opposing factors are coupled to provide environmentally induced crack nucleation and growth. The relative ratio of these two opposing factors depends on concentration and flow properties, thereby affecting limiting thresholds. The limiting concentration or saturation depends on the relative chemistry of environment and material. A dynamic dislocation model is suggested to account for crack growth.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics · High Temperature Alloys and Creep

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (97)

Show source-provided references
1. A.R.C. Westwood, C.M. Preece, and M.H. Kamdar: in Fracture, H. Leibowitz, ed., 1971, p. 13.
2. M.H. Kamdar: Prog. Mater. Sci., 1973, vol. 15, pp. 289–374.10.1016/0079-6425(73)90005-4 ↗
3. A.R. Troiano: in Hydrogen in Metals, I.M. Bernstein and A.W. Thompson, eds., ASM INTERNATIONAl, Materials Park, OH, 1974, pp. 3–15.
4. M.O. Speidel: in Hydrogen in Metals, I.M. Bernstein and A.W. Thompson, eds., ASM INTERNATIONAL, Materials Park, OH, 1974, pp. 249–76.
5. H.H. Johnson: in Hydrogen Embrittlement and Stress Corrosion Cracking, R. Gibala and R.F. Hehemann, eds., ASM, Metals Park, OH, 1984, pp. 3–27.
6. W.W. Gerberich and S. Chen: in Environment Induced Cracking of Metals, R.P. Gangloff and H.B. Ives, eds., NACE, Houston, TX, 1990, pp. 167–86
7. R.A. Oriani: Berichte Bunsen Gesellschaft Phys. Chem., 1972, vol. 76, pp. 848–57.10.1002/bbpc.19720760864 ↗
8. R.A. Oriani: in Stress Corrosion Cracking and Hydrogen Embrittlement of Iron Base Alloys, R.W. Stahle, J. Hochman, R. McCright, and J. Slater, eds., NACE-5, National Association of Engineers, Houston, TX, 1971, pp. 32–50.
9. R.P. Wei: in Hydrogen Effects in Metals, I.M. Bernstein and A.W. Thompson, eds., TMS, Warrendale, PA, 1981, pp. 677–89.
10. A. Turnbull: Corrosion, 2001, vol. 57, pp. 175–89.10.5006/1.3290342 ↗
11. R.P. Gangloff: in Comprehensive Structural Integrity, I. Milne, R.O. Ritchie, and B.Karihaloo, eds., Elsevier, New York, NY, 2003, vol. 6.
12. S.P. Lynch: Eng. Fail. Anal., 1974, vol. 1, pp. 77–90.10.1016/1350-6307(94)90009-4 ↗
13. S.P. Lynch: Mater. Charact., 1992, vol. 28, pp. 279–89.10.1016/1044-5803(92)90017-C ↗
14. S.P. Lynch: in Hydrogen Effects in Materials Behavior and Corrosion Interactions Deformations, N.R. Moody et al., eds., TMS, Warrendale, PA, 2003, pp. 449–86.
15. C.J. McMahon, Jr.: Eng. Fract. Mech., 2001, vol. 68, pp. 773–88.10.1016/S0013-7944(00)00124-7 ↗
16. S.M. Wiederhorn, S.W. Freiman, E.R. Fuller, Jr., and C.J. Simmons: J. Mater. Sci., 1982, vol. 17, pp. 3460–78.10.1007/BF00752191 ↗
17. E. Protopopoff and P. Marcus: in Corrosion Mechanisms in Theory and Practice, P. Marcus, ed., Marcel Dekker, Basil, 2002, pp. 53–96.10.1201/9780203909188.ch3 ↗
18. C.F. Old: J. Nucl. Mater., 1980, vol. 92, pp. 2–2510.1016/0022-3115(80)90136-1 ↗
19. M.M. Hall, Jr.: Corr. Sci., 2009, vol. 51, pp. 225–33.10.1016/j.corsci.2008.08.052 ↗
20. C.D. Beachem: Metall. Trans., 1972, vol. 3, pp. 437–51.10.1007/BF02642048 ↗
21. B. Lawn: Fracture of Brittle Solids, 2nd ed., University Press, Cambridge, United Kingdom, 1995.
22. S.M. Mikheevskiy and G. Glinka: Int. J. Fatigue, 2009, vol. 31, pp. 1828–36.10.1016/j.ijfatigue.2009.02.035 ↗
23. G.E. Beltz, D.M. Lipkins, and L.L. Fisher: Phys. Rev. Lett., 1999, vol. 82, pp. 4468–71.10.1103/PhysRevLett.82.4468 ↗
24. N. Bandhopadhyay, J. Kamada, and C.J. McMahon, Jr.: Metall. Trans. A, 1983, vol. 14A, pp. 881–88.10.1007/BF02644292 ↗
25. M. Tvrdy: in Fracture 1977, D.M.R.Taplin, ed., University of Waterloo Press, Waterloo, ON, Canada, 1977, vol. 2, pp. 255–59.
26. V.I. Likhtman and E.D. Shchukin: Sov. Phys.–Uspekhi, 1958, vol. 1, pp. 91–95.10.1070/PU1958v001n01ABEH003087 ↗
27. A.R.C. Westwood, C.M. Preece, and M.H. Kamdar: Am. Soc. Met. Trans. Q., 1967, vol. 60, pp. 723–25.
28. N.S. Stoloff, R.G. Davis, and T.L. Johnston: in Environment Sensitive Mechanical Behavior, A.R.C. Westwood and N.S. Stoloff, eds., Gordon & Beach, NY, 1966, pp. 613–54.
29. M.H. Kamdar and A.R.C. Westwood: Acta Metall., 1968, vol. 16, p. 1335.10.1016/0001-6160(68)90154-5 ↗
30. A.N. Stroh: Proc. R. Soc., 1954, vol. 223A, p. 404.
31. E. Smith and J.T. Barnby: Met. Sci. J., 1967, vol. 1, pp. 56–64.10.1016/0036-9748(67)90035-X ↗
32. J.J. Gilman: Trans. TMS-AIME, 1958, vol. 212, pp. 783–91.
33. T. Mura: Micromechanics of Defects in Solids, Kluwer Acadamic Publishers, Dordrecht, 1991.
34. J.P. Hirth: Metall. Trans. A, 1980, vol. 11A, pp. 861–90.10.1007/BF02654700 ↗
35. P. Gordon: Metall. Trans. A, 1978, vol. 9A, pp. 267–73.10.1007/BF02646710 ↗
36. W. Rostoker, J.M. McCaughey, and H. Markus: Embrittlement by Liquid Metals, Reinhold Publishing Co., New York, NY, 1960.
37. R.D. Kane, D. Wu, and S.M. Wilhelm: ASTM STP-1210, ASTM, Philadelphia, PA, 1993, pp. 181–92.
38. M. Elboujdaini, R. Ghali, and A. Galibois: in Environmental Induced Cracking of Metals, NACE-5, R.P. Gangloff and M.B. Ives, eds., NACE-10, Houston, TX, 1990, pp. 365–70.
39. J.A. Beavers, G.H. Koch, and W.E. Berry: Corrosion of Metals in Marine Environments, Metals and Ceramics Information Center, Battelle Columbus Labs., Columbus, OH, 1986.
40. S. Lynch: Monash University, Melbourne, Australia, private communication, 2009.
41. W.Y. Chu, X.M. Liu, J.L. Luo, and L.J. Qiao: Can. Metall. Q., 1999, vol. 38, pp. 127–32.10.1016/S0008-4433(99)00002-6 ↗
42. A.P. Druschitz and P. Gordon: Embrittlement by Liquid and Solid Metals, M.H. Kamdar, ed., Metallurgical Society of AIME Publications, Warrendale, PA, 1984, pp. 285–316.
43. P. Gordon and H.H. An: Metall. Trans. A, 1982, vol. 13A, pp. 457–72.10.1007/BF02643354 ↗
44. A.P. Druschitz: Ph.D. Thesis, Illinois Institute of Technology, Chicago, IL, 1982.
45. S.P. Lynch: Mater. Characterization, 1992, vol. 28, pp. 279–89.10.1016/1044-5803(92)90017-C ↗
46. M.H. Kamdar: in Treatise on Materials Science and Technology, C.L. Briant and S.K. Benerji, eds., Academic Press, New York, NY, 1983, vol. 25, pp. 361–45910.1016/B978-0-12-341825-8.50015-5 ↗
47. W.P Wei and M. Gao: in Hydrogen Degradation of Ferrous Alloys, R.A. Oriani, J.P. Hirth, and M. Smialowski, eds., Noyes Publications, Park Ridge, NJ, 1985, pp. 579–607.
48. D.O. Sprowls, M.B. Shumaker, J.D. Walsh, and J.W. Coursen: “Evaluation of Stress Corrosion Cracking Susceptibilty Using Fracture Mechanics Techniques,” Final Report Part I, George C. Marshall Space Flight Center, Huntsville, AL, Contract No. NAS 8-21487, May 31, 1973.
49. W.M. Robertson: Trans. AIME, 1966, vol. 236, p. 1478.
50. E. Glickman, V. Igoshev, and A. Braginsky: Phys. Chem. Mech. Surf., 1987, vol. 4, pp. 3167–80.
51. E. Glickman: Interface Sci., 2003, vol. 11, p. 451.10.1023/A:1026100112248 ↗
52. E. Glickman: Diff. Def. Forum, 2007, vol. 264, pp. 141–49.10.4028/www.scientific.net/DDF.264.141 ↗
53. A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, in press.
54. N.J.H. Holroyd, G.M. Scamans, and R. Hermann: in Embrittlement by the Localized Crack Tip Environment, R.P. Gangloff, ed., TMS-AIME, Warrendale, PA, 1984, pp. 327–47.
55. K.R. Cooper, L.M. Young, R.P. Gangloff, and R.G. Kelly: Mater. Sci. Forum, 2000, vols. 331–337, pp. 1625–34.10.4028/www.scientific.net/MSF.331-337.1625 ↗
56. R.E. Ricker: Mater. Sci. Eng. A, 1995, vol. A198 (1–2), pp. 231–38.10.1016/0921-5093(95)80078-9 ↗
57. M.M. Hall, Jr.: in Environment-Induced Cracking of Materials, S. Shipilov et al., eds., Elsevier, New York, NY, 2008, pp. 59–68.10.1016/B978-008044635-6.50008-X ↗
58. M.M. Hall and D.M. Symons: Int. Conf. on Hydrogen Effects on Material Behavior and Corrosion Deformation Interactions, R. Jones et al., eds., TMS, Warrendale, PA, 2002, pp. 811–22.
59. B.R. Lawn: Mater. Sci. Eng., 1974, vol. 13, pp. 277–83.10.1016/0025-5416(74)90199-2 ↗
60. S.W. Freiman, S.M. Wiederhorn, and J.J. Mecholsky, Jr.: J. Am. Ceram. Soc., 2009, vol. 92, pp. 1371–82.10.1111/j.1551-2916.2009.03097.x ↗
61. Y. Hirose and T. Mura: Eng. Fract. Mech., 1984, vol. 19, pp. 317–29.10.1016/0013-7944(84)90026-2 ↗
62. W.G. Clark, Jr.: Flow and Fracture, ASTM STP 631, ASTM, Philadelphia, PA, 1977, pp. 121–38.
63. R.A. Page and W.W. Gerberich: Metall. Trans. A, 1982, vol. 13A, pp. 305–11.10.1007/BF02643321 ↗
64. H. Vehoff and W. Rothe: Acta Metall., 1983, vol. 31, pp. 1781–93.10.1016/0001-6160(83)90125-6 ↗
65. K. Sadananda and P. Shahinian: Metall. Trans., 1981, vol. 12, p. 343.10.1007/BF02655208 ↗
66. W.W. Gerberich, P. Marsh, J. Hoehn, S. Venkataraman, and H. Huang: Int. Conf. on Corrosion-Deformation Interactions CDI ‘92, Fontainebleau, Les Edition de physique, zone Industrielle de Courtabaeuf, Paris, France, Oct. 1992, pp. 325–53
67. R.J. Walter and W.T. Chandler: in Environmental Degradation of Engineering Materials, M.R. Louthan and R.P. McNitt, eds., VPI Press, Blacksburg, VA, 1977, pp. 513–22.
68. N.R. Moody, R.E. Stoltz, and M.W. Perra: Res. Mechanica, 1986, vol. 18, p. 1.
69. N.R. Moody, M.W. Perra, and S.L. Robinson: Scripta Metall., 1988, vol. 22, p. 1261.10.1016/S0036-9748(88)80143-1 ↗
70. J.A. Lillard R.G. Kelly, and R.P. Gangloff: Corrosion ‘97, NACE, Houston, TX, 1997, paper no. 197.
71. K. Endo, K. Komai, and I. Yamamoto: Bull. MSME, 1981, vol. 24, pp. 1326–32.
72. P.D. Hicks and C.J. Altestter: Metall. Trans. A, 1992, vol. 23A, pp. 237–49.10.1007/BF02660868 ↗
73. B. Cox: J. Nucl. Mater., 1990, vol. 170, pp. 1–2310.1016/0022-3115(90)90321-D ↗
74. M.O. Speidel: Metall. Trans. A, 1975, vol. 6A, pp. 631–51.10.1007/BF02672284 ↗
75. W.G. Clarke, Jr.: J. Mater. Energy Sys., 1979, vol. 1, pp. 33–40.10.1007/BF02833988 ↗
76. P.S. Pao and R.P. Wei: Scripta Metall., 1977, vol. 11, p. 515.10.1016/0036-9748(77)90170-3 ↗
77. J.R. Rice and M.A. Johnson: in Inelastic Behavior of Solids, M.F. Kanninen, W.F. Adler, A.R. Rosenfield, and R.I. Jaffee, eds., McGraw-Hill Book Company, New York, 1970, p. 641.
78. R.O. Ritchie, J.F. Knott, and J.R. Rice: J. Mech. Phys. Solids, 1973, vol. 21, pp. 395–410.10.1016/0022-5096(73)90008-2 ↗
79. R.A. Oriani and P.H. Josephic: Acta Metall., 1977, vol. 25, pp. 979–88.10.1016/0001-6160(77)90126-2 ↗
80. L. Medina-Almazan, T. Auger, and D. Grose: J. Nucl. Mater., 2008, vol. 376, pp. 312–16.10.1016/j.jnucmat.2008.02.032 ↗
81. G.G. Hancock and H.H. Johnson: Trans. TMS-AIME, 1966, vol. 236, pp. 513–16.
82. A.K. Vasudevan and K. Sadananda: Metall. Mater. Trans. A, DOI:10.1007/s11661-010-0470-5.10.1007/s11661-010-0470-5 ↗
83. H.S. Nam and D.J. Srolovitz: Acta Mater., 2009, vol. 57, pp. 1546–53.10.1016/j.actamat.2008.11.041 ↗
84. C.D. Beachem: Metall. Trans., 1972, vol. 3, pp. 437–51.10.1007/BF02642048 ↗
85. F.A. McLintock: J. Fract. Mech., 1968, vol. 4, p. 101.10.1007/BF00188939 ↗
86. J.R. Rice and R. Thomson: Phil Mag., 1974, vol. 15, p. 567
87. J.R. Rice and J.S Wang: Mater. Sci. Eng., 1989, vol. A107, pp. 23–40.10.1016/0921-5093(89)90372-9 ↗
88. G.E. Beltz and J.R. Rice: in Modeling the Deformation of Crystalline Solids, T.C. Lowe, A.D. Rollett, P.S. Follansbee, and G.S. Daehneds, eds., The Minerals, Metals and Materials Society (TMS), Warrendale, PA, 1991, pp. 457–80.
89. J.R. Rice and G.E. Beltz: J. Mech. Phys. Solids, 1994, vol. 42, pp. 343–60.
90. G.E. Beltz and L.B. Freund: Phys. Status Solidi (b), 1993, vol. 180, p. 303.10.1002/pssb.2221800203 ↗
91. D.M. Lepkin, G.E. Beltz, and L.L. Fisher: Mater. Res. Soc. Proc., 1999, vol. 539, pp. 49–56.10.1557/PROC-539-49 ↗
92. G.E. Bletz and J.R. Rice: Acta Metall. Mater., 1992, vol. 40, pp. s321–s331.10.1016/0956-7151(92)90291-L ↗
93. D.M. Lepkin and G.E. Bletz: Acta Mater., 1996, vol. 44, pp. 1287–91.10.1016/1359-6454(95)00300-2 ↗
94. A. Taha and P. Sofronis: Eng. Fract. Mech., 2001, vol. 68, pp. 803–37.10.1016/S0013-7944(00)00126-0 ↗
95. K. Sadananda, K. Jagannadham, and M.J. Marcinkowski: Phys. Status Solidi (a), 1977, vol. A44, pp. 633–73310.1002/pssa.2210440228 ↗
96. H.G. Nelson: in Embrittlement of Engineering Alloys, C.L. Briant and S.K. Banerji, eds.; Treatise Mater. Sci. Technol., Academic Press, New York, NY, 1983, vol. 25, pp. 275–359.10.1016/B978-0-12-341825-8.50014-3 ↗
97. J.C. Scully: in The Theory of Stress Corrosion of Alloys, J.C. Scully, ed., NATO Scientific Affairs Division, Brussels, 1971, pp. 127–66.