journal article·2006-03

An analysis of grain boundaries and grain growth in cemented tungsten carbide using orientation imaging microscopy

Vineet Kumar, Zhigang Zak Fang, S. I. Wright, M. M. Nowell

Publisher page

Abstract

Tungsten carbide grains are usually prism-shaped triangular platelets in cemented tungsten carbide materials, owing to the highly anisotropic nature of tungsten carbide grains. The misorientation distribution function (MODF) shows a preferred misorientation relationship between WC/WC crystals. The misorientation relationship is characterized as 90 deg misorientation about the [1010] axis. The carbide-carbide boundaries with 90 deg rotation about the [1010] axis are low-energy boundaries and play an important role in grain growth and densification during sintering. In this study, the evolution of carbide-carbide boundaries with 90 deg rotation about the [1010] axis during the sintering process is determined quantitatively using orientation imaging microscopy (OIM). The evolution of boundaries is correlated with grain growth. The rapid grain growth at early stages of sintering is attributed to coalescence of grains along the 90 deg low-energy boundaries. The origin of these boundaries and their role in grain growth during sintering are also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Advanced Materials Characterization Techniques · Diamond and Carbon-based Materials Research

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (26)

Show source-provided references
1. H.E. Exner: Int. Met. Rev., 1979, vol. 4, pp. 149–74.
2. D.N. French and D.A. Thomas: Int. J. Powder Metall., 1967, vol. 393, p. 7.
3. A.V. Shatov, S.A. Firstov, and I.V. Shatova: Mater. Sci. Eng., 1998, vol. A242, p. 7.10.1016/S0921-5093(97)00509-1 ↗
4. Z. Fang, P. Maheshwari, X. Wang, H.Y. Sohn, A. Griffo, and R. Riley: Int. J. Refractory Met. Hard Mater., 2005, vol. 23, pp. 249–57.10.1016/j.ijrmhm.2005.04.014 ↗
5. Z. Fang and J.W. Eason: Int. J. Refractory Met. Hard Mater., 1995, vol. 13, p. 297.10.1016/0263-4368(95)92675-A ↗
6. W.D. Schubert, A. Bock, and B. Lux: Int. J. Refractory Met. Hard Mater., 1995, vol. 13 (5), pp. 281–96.10.1016/0263-4368(95)92674-9 ↗
7. C.S. Kim and G.S. Rohrer: Interface Sci., 2004, vol. 12, p. 19.10.1023/B:INTS.0000012291.81411.dc ↗
8. M.U. Farooq and U. Klement: J. Microsc., 2004, vol. 213 (3), pp. 306–12.10.1111/j.0022-2720.2004.01313.x ↗
9. S. Lay and M. Laubradou: Phil. Mag., 2003, vol. 83 (23), p. 2669.10.1080/1478643031000136094 ↗
10. F. Humphreys and M. Hartherly: Recrystallization and Related Annealing Phenomena, 2nd ed. Elsevier, Amsterdam, 2004.
11. J.D. Kim and S.J. Kang: J. Am. Ceram. Soc., 2005, vol. 82 (2), p. 500.10.1111/j.1551-2916.2005.00091.x ↗
12. W.A. Kaysser, S. Takajo, and G. Petzow: Acta Metall., 1984, vol. 32 (1), p. 115.10.1016/0001-6160(84)90208-6 ↗
13. U.J. Chung, J.K. Park, N.M. Hwang, H.Y. Lee, and D.Y. Kim: J. Am. Ceram. Soc., 2002, vol. 85 (4), p. 965.10.1111/j.1151-2916.2002.tb00200.x ↗
14. P. Faiver and R.D. Doherty: J. Mater. Sci., 1979, vol. 14, p. 897.10.1007/BF00550722 ↗
15. T.O. Saetre and N. Ryum: Metall. Mater. Trans. A, 1995, vol. 26A, p. 1687.10.1007/BF02670755 ↗
16. T.H. Courtney and J.K. Lee: Metall. Mater. Trans. A, 1980, vol. 11A, p. 943.10.1007/BF02654707 ↗
17. Z.S. Nikolic and W.J. Huppmann: Acta Metall., 1980, vol. 28, p. 475.10.1016/0001-6160(80)90137-6 ↗
18. D. Moldovan, D. Wolf, S.R. Phillpot, and A.J. Haslam: Acta Mater., 2002, vol. 50, p. 3397.10.1016/S1359-6454(02)00153-2 ↗
19. A.J. Haslam, S.R. Phillpot, D. Wolf, D. Moldovan, and H. Gleiter: Mater. Sci. Eng., A, 2001, vol. 318, p. 293.10.1016/S0921-5093(01)01266-7 ↗
20. N.M. Nowell and S.I. Wright: J. Microsc., 2004, vol. 213 (3), p. 296.10.1111/j.0022-2720.2004.01299.x ↗
21. R.M. German: Liquid Phase Sintering, Plenum Press, New York, NY, 1985.10.1007/978-1-4899-3599-1 ↗
22. Valerie Randle: Texture Analysis, CRC Press, Boca Raton, FL, 2000.
23. D.A. Smith: Interface Sci., 1996, vol. 4, p. 11.
24. J. Harsee and R. Shimizu: Trans. Jpn. Inst. Met., 1998, vol. 29, p. 388.10.2320/matertrans1960.29.388 ↗
25. R. Sanstrom: Acta Metall., vol. 25, p. 897.10.1016/0001-6160(77)90176-6 ↗
26. J.P. Hirth and G.M. Pound: Progr. Mater. Sci., 1963, vol. 11, p. 88.