journal article·2000-04

Creep deformation and fracture behavior of types 316 and 316L(N) stainless steels and their weld metals

G. Sasikala, S. L. Mannan, M. D. Mathew, K. Bhanu Rao

Publisher page

Abstract

The creep properties of a nuclear-grade type 316(L) stainless steel (SS) alloyed with nitrogen (316L(N) SS) and its weld metal were studied at 873 and 923 K in the range of applied stresses from 100 to 335 MPa. The results were compared with those obtained on a nuclear-grade type 316 SS, which is lean in nitrogen. The creep rupture lives of the weld metals were found to be lower than those of the respective base metals by a factor of 5 to 10. Both the base and weld metals of 316L(N) SS exhibited better resistance to creep deformation compared to their 316 SS counterparts at identical test conditions. A power-law relationship between the minimum creep rate and applied stress was found to be obeyed for both the base and weld metals. Both the weld metals generally exhibited lower rupture elongation than the respective base metals; however, at 873 K, the 316 SS base and weld metals had similar rupture elongation at identical applied stresses. Comparison of the rupture lives of the two steels to the ASME curves for the expected minimum stress to rupture for 316 SS base and weld metals showed that, for 316L(N) SS, the specifications for maximum allowable stresses based on data for 316 SS could prove overconservative. The influence of nitrogen on the creep deformation and fracture behavior, especially in terms of its modifying the precipitation kinetics, is discussed in light of the microstructural observations. In welds containing δ ferrite, the kinetics of its transformation and the nature of the transformation products control the deformation and fracture behavior. The influence of nitrogen on the δ ferrite transformation behavior and coarsening kinetics is also discussed, on the basis of extensive characterization by metallographic techniques.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Hydrogen embrittlement and corrosion behaviors in metals · Fatigue and fracture mechanics

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. ASME Boiler and Pressure Vessel Code, Code Case N-47, ASME, New York, NY, 1986.
2. P. Marshall: Austenitic Stainless Steels: Microstructure and Mechanical Properties, Elsevier Applied Science Publishers, London, 1984.
3. J.M. Corum: ASME J. Pressure Vessel Technol., 1990, vol. 112. pp. 333–39.10.1115/1.2929886 ↗
4. ASME Boiler and Pressure Vessel Code, Code Case N-47, ASME, New York, NY, 1992.
5. M.D. Mathew, G. Sasikala, S.L. Mannan, and P. Rodriguez: Trans. ASME J. Eng. Mater. Technol., 1993, vol. 115, pp. 163–70.10.1115/1.2904202 ↗
6. E. Folkhard: Welding Metallurgy of Stainless Steels, Springer-Verlag, New York, NY, 1986, pp. 103–43.
7. R.G. Thomas: Weld. J., 1978, vol. 57, pp. 81s-86s.
8. Sadao Ohta, Masayuki Fujiware, and Hiroyuki Ochida: Proc. Int. Conf. on Creep, JSME, Tokyo, 1986, pp. 85–90.
9. T.P.S. Gill, V. Shankar, M.G. Pujar, and P. Rodriguez: Scripta Metall. Mater., 1995, vol. 32, pp. 1595–1600.10.1016/0956-716X(95)00242-N ↗
10. ASTM Standard Practice for Conducting Creep, Creep-Rupture and Stress Rupture Tests on Metallic Materials, E 139-83, ASTM, Philadelphia, PA, 1990.
11. M.D. Mathew, G. Sasikala, K. Bhanu Sankara Rao, and S.L. Mannan: Mater. Sci. Eng., 1991, vol. A148, pp. 253–60.10.1016/0921-5093(91)90827-A ↗
12. K. Taguchi: 6th Int. Conf. on Creep and Fatigue: Design and Life Assessment at High Temperature, London, Apr. 16–17, 1996, Institution of Mechanical Engineers, London, 1996, pp. 221–30.
13. G. Sasikala: Indira Gandhi Centre for Atomic Research, Kalpakkam, unpublished research, 1998.
14. A.S. Reddy, S.L. Mannan, V. Seetharaman, and P. Rodriguez: Proc. National Welding Seminar, Indian Institute of Welding, New Delhi, 1980, pp. 1–12.
15. M. Valsan, D. Sundararaman, K. Bhanu Sankara Rao, and S.L. Mannan: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1207–20.10.1007/BF02670616 ↗
16. S.R. Keown and R.G. Thomas: Met. Sci., 1981, vol. 15, pp. 386–92.10.1179/030634581790426886 ↗
17. G. Piatti and M. Vedani: J. Mater Sci., 1990, vol. 25, pp. 4285–97.10.1007/BF00581086 ↗
18. D.G. Morris and D.R. Harries: Met. Sci., 1978, vol. 12, pp. 525–31.10.1016/0036-9748(78)90201-6 ↗
19. M.D. Mathew, S. Latha, G. Sasikala, S.L. Mannan, and P. Rodriguez: Nucl. Technol., 1988, vol. 81, pp. 114–21.10.13182/NT88-A34083 ↗
20. T. Nakazawa, H. Abo, M. Tanino, H. Komatsu, T. Nishida, and M. Tashimo: Proc. 6th Int. Conf. Pressure Vessel Technology, Beijing, Sept. 11–15, 1988, Cengdian Liu and R.W. Nichols, eds., Pergamon Press, Elmsford, NY, 1988, pp. 1041–48.
21. D.G. Morris: Met. Sci., 1978, vol. 12, pp. 19–25.10.1179/msc.1978.12.1.19 ↗
22. B. Weiss and R. Stickler: Metall. Trans., 1972, vol. 3, pp. 851–66.10.1007/BF02647659 ↗
23. T. Matsuo, N. Morioka, S. Kaise, M. Kikuchi, and R. Tanaka: Proc. Int. Conf. High Nitrogen Steels, Lille, May 18–20, 1988, J. Foct and A. Hendry, eds., Institute of Metals, London, 1989, pp. 213–17.
24. T. Nakazawa, H. Abo, M. Tanino, H. Komatsu, T. Nishida, and M. Tashimo: Proc. Int. Conf. High Nitrogen Steels, Lille, May 18–20, 1988, J. Foct and A. Hendry, eds., Institute of Metals, London, 1989, pp. 218–23.
25. R.E. Stoltz and J.B. Van der Sande: Metall. Trans. A, 1980, vol. 11A, pp. 1033–37.10.1007/BF02654717 ↗
26. P. Mullner, C. Solenthaler, P. Uggowitzer, and M.O. Spiedel: Mater. Sci. Eng., 1993, vol. A164, pp. 164–69.10.1016/0921-5093(93)90655-X ↗
27. J.K.L. Lai: Mater. Sci. Eng., 1983, vol. 61, pp. 101–9.10.1016/0025-5416(83)90191-X ↗
28. D. Sundararaman, P. Shankar, and V.S. Raghunathan: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 1175–86.10.1007/BF02649856 ↗
29. E.K. Bloom and E.E. Dehard: J. Met., 1961, vol. 13, p. 908.
30. J.F. Mansfield: J. Mater. Sci., 1987, vol. 22, pp. 1275–85.10.1007/BF01233121 ↗
31. S.L. Mannan and P. Rodriguez: Met. Sci., 1983, vol. 17, pp. 63–69.10.1016/0036-9748(83)90071-6 ↗
32. R.G. Thomas: Proc. Specialists Meeting on Mechanical Properties of Structural Materials Including Environment, Chester, United Kingdom, IWGFR-49, 1983, International Atomic Energy Agency, Vienna, 1983, vol. 1, pp. 297–326.