Microstructure and Solidification Sequence of the Interdendritic Region in a Third Generation Single-Crystal Nickel-Base Superalloy
Source abstract
Abstract
An analysis of the microstructure of the interdendritic regions in an as-cast third generation single-crystal nickel-base superalloy CMSX-10K has been carried out using automated serial sectioning with sequential focused ion beam (FIB) milling and image capture of the secondary electron image in a combined FIB–scanning electron microscope (SEM). Two interdendritic morphologies with vastly different γ/γ′ spacing were identified; these are (1) fine γ/γ′ morphology and (2) coarse cellular γ′ separated by narrow γ channels. The FIB results indicate that following primary solidification (L → γ), solidification of the interdendritic region commences in areas that show the fine γ/γ′ morphology, (1) on the γ dendrite lobe. This is followed by a gradual transition to growth of the coarse cellular γ/γ′ channel structure, (2) which occur up to the termination of the solidification process.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Solidification and crystal growth phenomena · Microstructure and Mechanical Properties of Steels
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. G.L. Erickson: J. Met., 1995, vol. 47, pp. 36–39.
2. W.J. Boettinger, U.R. Kattner, and D.K. Banerjee: in Modelling, Casting, Welding and Advanced Solidification Processes VIII, B.G. Thomas and C. Beckermann, eds., TMS, Warrendale, PA, 1998, pp. 159–70.
3. G.E. Fuchs: Mater. Sci. Eng. A, 2001, vol. 300, pp. 52–60.10.1016/S0921-5093(00)01776-7 ↗
4. R.M. Kearsey, J.C. Beddoes, K.M. Jaansalu, W.T. Thompson, and P. Au: in Superalloys 2004, K.A. Green, T.M. Pollock, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS Warrendale, PA, 2004, pp. 801–10.
5. R.M. Kearsey, J.C. Beddoes, P. Jones, and P. Au: Intermetallics, 2004, vol. 12, pp. 903–10.10.1016/j.intermet.2004.02.041 ↗
6. M. Ganesan, D. Dye, and P.D. Lee: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2191–2204.10.1007/s11661-005-0338-2 ↗
7. R.A. Hobbs, S. Tin, and C.M.F. Rae: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 2761– 73.10.1007/s11661-005-0272-3 ↗
8. N. D’Souza and H.B. Dong: Scripta Mater., 2007, vol. 56, pp. 41–44.10.1016/j.scriptamat.2006.08.060 ↗
9. N. D’Souza and H.B. Dong: Proc. 5th Decennial Conf. on Solidification Processing, H. Jones, ed., Sheffield, United Kingdom, 2007, pp. 85–88.
10. N. Warnken, D. Ma, M. Mathes, and I. Steinbach: Mater. Sci. Eng. A, 2005, vols. 413–414, pp. 267–71.10.1016/j.msea.2005.09.067 ↗
11. P. Willemin and M. Durrand-Charre: in Superalloys 1988, S. Reichman, D.N. Duhl, G. Maurer, S. Antolovich, and C. Lund, eds., TMS, Warrendale, PA, 1988, pp. 723–32.
12. J.D. Hunt and S.-Z. Lu: in Handbook of Crystal Growth, D.T.J. Hurle, ed., Elsevier Science, New York, NY, 1993, vol. 2, pp. 1113–66.
13. JMatPro, Version 2.0 (Ni Module), Sente Software, Guildford, United Kingdom, Nov. 2002.
14. Y. Zhu, S. Zhang, L. Xu, J. Bi, Z. Hu, and C. Shi: in Superalloys 1988, D.N. Duhl, G. Maurer, S. Antolovich, C. Lund, and S. Reichman, eds., TMS, Warrendale, PA, 1988, pp. 703–12.
15. S.-M. Seo, J.-H. Lee, Y.-S. Yoo, C.-Y. Jo, H. Miyahara, and K. Ogi: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrendale, PA, 2008, pp. 277–86.
16. P. Thévenaz, U.E. Ruttimann, and M. Unser: IEEE Trans. Image Process., 1998, vol. 7, pp. 27–41.10.1109/83.650848 ↗