journal article·2013-05

Hot Tearing Characteristics of Binary Mg-Gd Alloy Castings

Amirthalingam Srinivasan, Zhi Wang, Yuanding Huang, Felix Beckmann, Karl Ulrich Kainer, Norbert Hort

Publisher page

Abstract

Hot tearing characteristics of Mg-xGd (x = 1, 2, 5 and 10 wt pct) binary alloys have been studied in a constrained rod casting apparatus attached with a load cell and data acquisition system. The onset temperature of the hot tearing was identified from the force drop in the force–temperature–time curve, and the corresponding onset solid fraction was obtained from the fraction solid–temperature curve derived using Scheil non-equilibrium solidification model. The results indicate that the onset solid fraction for the hot tear decreased as the Gd content increased. The susceptibility defined by the total tear volume measurements by the X-ray micro-tomography technique indicates that the susceptibility increased with increase in Gd content to reach a maximum at 2 pct and then reduced with further increase in Gd to reach a minimum with 10 pct Gd. The high susceptibility observed in Mg-2 pct Gd was attributed to its cellular or columnar grain structure, which facilitated easy tear propagation, high strain at the onset with little amount of remaining liquid. In contrast, the lowest susceptibility of Mg-10 pct Gd was related to its equiaxed grain structure, which effectively accommodated the strain during solidification by reorienting themselves and the ability of the Gd-rich liquid to partially or completely refill the tear at the end of solidification. The results also indicate that the increase in mold temperature [723 K (450 °C)] significantly reduced the total crack volume and hence reduced the susceptibility, which was attributed to the increase in the hot spot size and lesser total stain at the hot spot region.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (37)

Show source-provided references
1. D.G. Eskin, Suyitno and L. Katgerman (2004) Prog. Mater. Sci. 49, pp. 629-711.10.1016/S0079-6425(03)00037-9 ↗
2. D.G. Eskin and L.Katgerman: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1511-19.10.1007/s11661-007-9169-7 ↗
3. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449-55.10.1007/s11661-999-0334-z ↗
4. T.W. Clyne and G.J. Davies: Br. Foundrym., 1981, vol. 74, pp. 65-73.
5. A. A. Gokhale: Trans. IIM, 1986, vol. 39, pp. 153-163.
6. Z.S. Zhen, N. Hort, Y.D. Huang, O. Utke, N. Petri and K.U. Kainer: Int. J. Cast Met. Res.., 2009, vol. 22, pp. 331-34.10.1179/136404609X368145 ↗
7. M. Pekguleryuz and M. Celikin: Int. Mater. Rev., 2010, vol. 55, pp. 197-217.10.1179/095066010X12646898728327 ↗
8. G. Cao, I. Haygood and S. Kou: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2139-50.10.1007/s11661-010-0248-9 ↗
9. G. Cao, C. Zhang, H. Cao, Y.A. Chang and S. Kou: Metall. Mater. Trans. A, 2010. vol. 41A, pp. 706-16.10.1007/s11661-009-0134-5 ↗
10. Z. Zhen, N. Hort, Y. Huang, N. Petri, O. Utke and K.U. Kainer: Mater. Sci. Forum, 2009, vols. 618-619, pp. 533-40.10.4028/www.scientific.net/MSF.618-619.533 ↗
11. G. Cao and S. Kou: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3647-63.10.1007/s11661-006-1059-x ↗
12. G. Cao and S. Kou: Mater. Sci. Eng. A, 2006, vol. A417, pp. 230-38.10.1016/j.msea.2005.10.050 ↗
13. L. Zhou, Y.D. Huang, P.L. Mao, K.U. Kainer, Z. Liu and N. Hort: Int. J. Cast Met. Res.. 2011, vol. 24, pp. 170-76.10.1179/136404611X13001912813942 ↗
14. Y. Wang, Q. Wang, C. Ma, W. Ding and Y. Zhu: Mater. Sci. Eng., 2003, vol. A342, pp. 178-82.10.1016/S0921-5093(02)00315-5 ↗
15. B. Tang, S.S. Li, X.S. Wang, D.B. Zeng and R. Wu: J. Mater. Sci., 2005, vol. 40, pp. 2931-36.10.1007/s10853-005-2440-7 ↗
16. P. Gunde, A. Schiffl and P.J. Uggowitzer: Mater. Sci. Eng. A, 2010, vol. 527, pp. 7074-79.10.1016/j.msea.2010.07.086 ↗
17. Z. Yang, J.P. Li, J.X. Zhang, G.W. Lorimer and J. Robson: Acta Metall. Sin. (English Letters), 21, 2008, 313-28.10.1016/S1006-7191(08)60054-X ↗
18. N. Hort, Y. Huang, D. Fechner, M. Störmer, C. Blawert, F. Witte, C. Vogt, H. Drücker, R. Willumeit, K.U. Kainer and F. Feyerabend: Acta Biomater., 2010, vol. 6, pp. 1714-25.10.1016/j.actbio.2009.09.010 ↗
19. K.Y. Zheng, J. Dong, X. Q. Zeng and W.J. Ding: Mater. Sci. Eng. A, 2008, vol A489, pp. 44-54.10.1016/j.msea.2007.11.080 ↗
20. Q. Peng, X. Hou, L. Wang, Y. Wu, Z. Cao and L. Wang: Mater. Des., 2009, vol. 30, pp. 292-96.10.1016/j.matdes.2008.04.069 ↗
21. A.K. Dahle and L. Arnberg: JOM, 1996, vol.48, pp. 34-37.10.1007/BF03222888 ↗
22. M. Easton, J. Grandfield, D. StJohn and B. Rinderer: Mater. Sci. Forum, 2006, vol. 30, pp. 1675-80.10.4028/www.scientific.net/MSF.519-521.1675 ↗
23. M. Paliwal, Y.B. Kang, E. Essadiqi, and I.H. Jung: in Magnesium Technology 2012, Orlando, S.N. Mathaudhu, W.H. Sillekens, N.R. Neelameggham, and N. Hort, eds., TMS, Warrendale, PA, 2012, pp. 175–78.10.1002/9781118359228.ch33 ↗
24. J.A. Dantzig and M. Rappaz: Solidification, 1st ed., EPFL Press and CRC Press, Lausanne, 2009, 429 pp.
25. L. Arnberg, G.Chai and L. Bäckerud: Mater. Sci. Eng. A, 1993, vol. A173, pp. 101-03.10.1016/0921-5093(93)90195-K ↗
26. P.D. Grasso, B. Commet, J.M. Drezet, Y. Ju, L. Arnberg and M. Rappaz: Aluminium, 2004, vol. 80, pp. 572-78.
27. W.I. Pumphrey and P.H. Jennings: J. Inst. Met., 1948, vol. 75, pp. 235-56.
28. A.K. Dahle, S. Instone and T. Sumitomo: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 105-13.10.1007/s11661-003-0212-z ↗
29. H.F. Bishop, C.G. Ackerlind, and W.S. Pellini: AFS Trans., 1952, vol. 60, pp. 818—33.
30. S. Lin, C. Aliravci and M.O. Pekguleryuz: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1056-68.10.1007/s11661-007-9132-7 ↗
31. A.M. Nabawy, A.M. Samuel, F.H. Samuel and H.W. Doty: J Mater Sci., 2012, vol. 47, pp. 4146-58.10.1007/s10853-012-6269-6 ↗
32. A.K. Dahle and D.H. StJohn: Acta. Mater. 1999, vol. 47, pp. 31-41.10.1016/S1359-6454(98)00342-5 ↗
33. H. K. Kamga, D. Larouche, M. Bournane and A. Rahem: Mater. Sci. Eng. A, 2010, vol. A527, pp. 7413-23.10.1016/j.msea.2010.08.025 ↗
34. S.S. Li, B. Tang, X.Y. Jin and D.B. Zeng: J Mater. Sci., 2012, vol. 47, pp. 2000-04.10.1007/s10853-011-5997-3 ↗
35. M.R.N. Esfahani and B. Niroumand: Mater. Charact., 2010, vol. 61, pp. 318-24.10.1016/j.matchar.2009.12.015 ↗
36. W.S. Pellini: Foundry, 1952, vol. 80, pp. 125-99.
37. J. Campbell: Casting, 2nd ed., Butterworth-Heinemann, Oxford, 2003, pp. 246–47.