Recrystallization Phenomena During Friction Stir Processing of Hypereutectic Aluminum-Silicon Alloy
Source abstract
Abstract
Microstructural evolution and related dynamic recrystallization phenomena were investigated in overlapping multipass friction stir processing (FSP) of hypereutectic Al-30 pct Si alloy. FSP resulted in the elimination of porosities along with the refinement of primary silicon particles and alpha aluminum grains. These alpha aluminum grains predominantly exhibit high angle boundaries with various degrees of recovered substructure and dislocation densities. The substructure and grain formation during FSP take place primarily by annihilation and reorganization of dislocations in the grain interior and at low angle grain boundary. During multipass overlap FSP, small second phase particles were observed to form, which are accountable for pinning the grain boundaries and thus restricting their growth. During the multipass overlap FSP, the microstructure undergoes continuous dynamic recrystallization by formation of the subgrain boundary and subgrain growth to the grain structure comprising of mostly high angle grain boundaries.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloys Composites Properties · Advanced Welding Techniques Analysis · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (62)
Show source-provided references
1. A.J. Clegg and A.A. Das: Wear, 1977, vol. 43, pp. 367–73.10.1016/0043-1648(77)90132-6 ↗
2. P.J. Ward, H.V. Atkinson, P.R.G. Anderson, L.G. Elias, B. Garcia, L. Kahlen, and J.M. Rodriguez-Ibabe: Acta Mater., 1996, vol. 44, pp. 1717–27.10.1016/1359-6454(95)00356-8 ↗
3. J.L. Estrada and J. Duszczyk: J. Mater. Sci., 1990, vol. 25, pp. 886–904.10.1007/BF03372176 ↗
4. Q.G. Wang: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2887–99.10.1007/s11661-003-0189-7 ↗
5. T. Wai, F. Yan, and J. Tian: J. Alloy. Compd., 2005, vol. 389, pp. 169–76.10.1016/j.jallcom.2004.05.084 ↗
6. A. Agrawal and T. Mchechnie: Adv. Mater. Process., 2001, vol. 159, pp. 44–50.
7. G. Rivera, C. Cmapillo, B. Castro, M. Herrera, and J. Islas: Mater. Sci. Eng. A, 2000, vol. 273, pp. 149–59.10.1016/S0921-5093(99)00625-5 ↗
8. C.L. Xu, H.Y. Wang, Y.F. Yang, and Q.C. Jiang: J. Alloy. Compd., 2006, vol. 421, pp. 128–36.10.1016/j.jallcom.2005.11.034 ↗
9. A. Knuutien, K. Nogita, S.D. Mcdonald, and A.K. Dahle: J. Light Met., 2001, vol. 1, pp. 229–40.10.1016/S1471-5317(02)00004-4 ↗
10. Y. Iwahashi, J.-T. Wang, Z. Horita, M. Nemoto, and T.G. Langdon: Scripta Mater., 1996, vol. 35, pp. 143–46.10.1016/1359-6462(96)00107-8 ↗
11. B.B. Straumal, B. Baretzky, A.A. Mazilkin, F. Phillipp, O.A. Kogtenkova, M.N. Volkov, and R.Z. Valiev: Acta Mater., 2004, vol. 52, pp. 4469–78.10.1016/j.actamat.2004.06.006 ↗
12. C. Xu, M. Furukawa, Z. Horita, and T.G. Landon: Acta Mater., 2003, vol. 51, pp. 6139–49.10.1016/S1359-6454(03)00433-6 ↗
13. L. Blaza, M. Sugamata, J. Kanekob, J. Sobota, G. Wloch, W. Bochniak, and A. Kula: J. Mater. Process. Technol, 2009, vol. 209, pp. 4329–36.10.1016/j.jmatprotec.2008.11.012 ↗
14. C.-H. Chiang and C.Y.A. Tsao: Mater. Sci. Eng. A, 2005, vol. 396, pp. 263–70.10.1016/j.msea.2005.01.017 ↗
15. M. Gupta, F.A. Mohamed, and E.J. Lavernia: Metall. Trans. A, 1992, vol. 23A, pp. 831–39.10.1007/BF02675560 ↗
16. C. Cui, A. Schulz, K. Schimanski, and H.W. Zoch: J. Mater. Process. Technol., 2009, vol. 209, pp. 5220–5528.10.1016/j.jmatprotec.2009.03.009 ↗
17. J. Zhuo, J. Duszczyk, and B.M. Lorevaar: J. Mater. Sci., 1991, vol. 26, pp. 3041–50.10.1007/BF01124840 ↗
18. R.S. Mishra, M.W. Mahoney, S.X. McFadden, N.A. Mara, and A.K. Mukherjee: Scripta Mater., 2000, vol. 42, pp. 163–68.10.1016/S1359-6462(99)00329-2 ↗
19. R.S. Mishra and M.W. Mahoney: Mater. Sci. Forum, 2001, vol. 357, pp. 507–10.10.4028/www.scientific.net/MSF.357-359.507 ↗
20. W.M. Thomas, E.D. Nicholas, J.C. Needham, M.G. Murch, P.J. Smith, and C.J. Dawes: G.B. Patent Application No. 9125978.8, 1991.
21. Z.Y. Ma: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 642–58.10.1007/s11661-007-9459-0 ↗
22. E.A. El-Danaf, M.M. El-Rayes, and M.S. Soliman: Mater. Des., 2010, vol. 31, pp. 1231–36.10.1016/j.matdes.2009.09.025 ↗
23. T. Morishigie, T. Hirata, M. Tsujikawa, and K. Higashi: Mater. Lett., 2010, vol. 64, pp. 1905–08.10.1016/j.matlet.2010.06.003 ↗
24. A.L. Pilchak and J.C. Williams: Metall. Mater. Trans. A, 2010, vol. 41A, 22–25.10.1007/s11661-009-0091-z ↗
25. Z.Y. Ma, B.L. Xiao, J. Yang, and A.H. Feng: Mater. Sci. Forum, 2010, vol. 638, pp. 1191–96.10.4028/www.scientific.net/MSF.638-642.1191 ↗
26. J. Gandra, R. Miranda, P. Vilaca, A. Velhinho, and J.P. Teixeira: J. Mater. Process. Technol., 2011, vol. 211, pp. 1659–68.10.1016/j.jmatprotec.2011.04.016 ↗
27. M. Barmouz, P. Asadi, M.K. Beshararti-Givi, and M. Taherishangh: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1740–49.10.1016/j.msea.2010.11.006 ↗
28. D. Yadov and R. Bauri: Mater. Sci. Eng. A, 2011, vol. 528, pp. 1326–33.10.1016/j.msea.2010.10.035 ↗
29. M. Yang, C. Xu, C. Wu, H. Yang, and L. An: J. Mater. Sci., 2010, vol. 45, pp. 4431–38.10.1007/s10853-010-4525-1 ↗
30. A. Kurt, I. Uygur, and E. Cete: J. Mater. Process. Technol., 2000, vol. 211, pp. 313–17.10.1016/j.jmatprotec.2010.09.020 ↗
31. S.A. Alidokht, A. Abdollah-zadeh, S. Soleymani, and H. Assadi: Mater. Des., 2011, vol. 32, pp. 2727–33.10.1016/j.matdes.2011.01.021 ↗
32. L. Karthikeyan, V.S. Senthilkumar, V. Balasubramanian, and S. Natrajan: Mater. Des., 2009, vol. 20, pp. 2237–42.10.1016/j.matdes.2008.09.006 ↗
33. K. Nakata, Y.G. Kim, H. Fujii, T. Tsumura, and T. Komazaki: Mater. Sci. Eng. A, 2006, vol. 437, pp. 274–80.10.1016/j.msea.2006.07.150 ↗
34. N. Suna and D. Apelian: Mater. Sci. Forum, 2009, vol. 618, p. 361.10.4028/www.scientific.net/MSF.618-619.361 ↗
35. W. Wang, Q.Y. Shi, P. Liu, H.K. Li, and T. Li: J. Mater. Process. Technol., 2009, vol. 209, pp. 2099–2103.10.1016/j.jmatprotec.2008.05.001 ↗
36. M.L. Santella, I. Engstrom, D. Storjohann, and T.Y. Pan: Scripta Mater., 2005, vol. 59, pp. 201–06.10.1016/j.scriptamat.2005.03.040 ↗
37. Z.Y. Ma, S.R. Sharma, and R.S. Mishra: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 3323–36.10.1007/BF02586167 ↗
38. Z.Y. Ma, S.R. Sharm, and R.S. Mishra: Scripta Mater., 2006, vol. 54, pp. 1623–26.10.1016/j.scriptamat.2006.01.010 ↗
39. S. Jana, R.S. Mishra, J.A. Baumann, and J.A. Grant: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 2507–21.10.1007/s11661-010-0324-1 ↗
40. Z.Y. Ma, S.R. Sharma, and R.S. Mishra: Mater. Sci. Eng. A, 2006, vol. 433, pp. 269–78.10.1016/j.msea.2006.06.099 ↗
41. A.G. Rao, B.R.K. Rao, V.P. Deshmukh, A.K. Shah, and B.P. Kashyap: Mater. Des., 2009, vol. 63, pp. 2628–30.
42. Y. Jiang, D. Lu, and M. Zhou: Adv. Mater. Res., 2011, vol. 189, pp. 3601–03.10.4028/www.scientific.net/AMR.189-193.3601 ↗
43. K.V. Jata and S.L. Semiatin: Scripta Mater., 2000, vol. 43, pp. 743–49.10.1016/S1359-6462(00)00480-2 ↗
44. J-Q. Su, T.W. Nelson, and C.J. Sterling: Mater. Sci. Eng. A, 2005, vol. 405, pp. 227–36.
45. R.W. Fonda, J.F. Bingert, and K.J. Colligan: Scripta Mater., 2004, vol. 51, pp. 243–48.10.1016/j.scriptamat.2004.04.017 ↗
46. N. Kumar, R.S. Mishra, C.S. Huskamp, and K.K. Sankaran: Mater. Sci. Eng. A, 2011, vol. 528, pp. 5883–90.10.1016/j.msea.2011.03.109 ↗
47. J-Q. Su, T.W. Nelson, and C.J. Sterling: Philos. Mag., 2006, vol. 86, pp. 1–24.10.1080/14786430500267745 ↗
48. C.G. Rhodes, M.W. Mahoney, W.H. Bingel, and M. Calabrese: Scripta Mater., 2003, vol. 48, pp. 1451–55.10.1016/S1359-6462(03)00082-4 ↗
49. P.B. Prangnell and C.P. Heason: Acta Mater., 2005, vol. 53, pp. 3179–89.10.1016/j.actamat.2005.03.044 ↗
50. A. Yazdipour, M.A. Shafiei, and K. Dehghani: Mater. Sci. Eng. A, 2009, vol. 527, pp. 192–97.10.1016/j.msea.2009.08.040 ↗
51. S. Swanminathan, K. Oh-Ishi, A.P. Zhilyaev, C.B. Fuller, B. London, M.W. Mahoney, and T.R. McNelly: Metall. Mater. Trans. A, 2010, vol. 41A, pp. 631–40.10.1007/s11661-009-0140-7 ↗
52. J.L. Lytton, C.R. Barrett, and O.D. Sherby: Trans. Am. Inst. Min. Metal. Petrol. Eng., 1965, vol. 233, pp. 1399–1405.
53. B.P. Kashyap, K. Mctaggart, and K. Tangri: Philos. Mag. A, 1998, vol. 57, pp. 97–103.10.1080/01418618808204501 ↗
54. R.K. Davis, V. Randle, and G.J. Marshall: Acta Mater., 1998, vol. 46, pp. 6021–32.10.1016/S1359-6454(98)00286-9 ↗
55. G. Buffa, J. Hua, R. Shivpuri, and L. Fratini: Mater. Sci. Eng. A, 2006, vol. 419, pp. 381–88.10.1016/j.msea.2005.09.041 ↗
56. J.L. Ning, D.M. Jiang, X.G. Fan, Z.H. Lai, Q.C. Meng, and D.L. Wang: Mater. Charact., 2008, vol. 59, pp. 306–11.10.1016/j.matchar.2007.01.016 ↗
57. T.G. Nieh, L.M. Hsiung, J. Wadsworth, and R. Kaibyshev: Acta Mater., 1998, vol. 46, pp. 2789–2800.10.1016/S1359-6454(97)00452-7 ↗
58. C.G. Rhodes, M.W. Mohoney, W.H. Bingel, R.A. Spurling, and C.C. Bampton: Scripta Mater., 1997, vol. 36, pp. 69–75.10.1016/S1359-6462(96)00344-2 ↗
59. L.E. Murr, G. Liu, and J.C. McClure: J. Mater. Sci. Lett., 1997, vol. 16, pp. 1801–03.10.1023/A:1018556332357 ↗
60. S. Fare, N. Lecis, and M. Vedani: J. Metall., 2011, vol. 1, pp. 1–8.10.1155/2011/959643 ↗
61. F.J. Humpherys and M. Hatherly: in Recrystallization and Related Annealing Phenomena, Pergamon Press, Oxford, 1995, pp. 24, 437.10.1016/B978-0-08-041884-1.50017-9 ↗
62. R.K. Islamgaliev, R. Kuzel, S.N. Mikov, A.V. Igo, J. Burianek, F. Chmelik, and R.Z. Valiev: Mater. Sci. Eng., 1999, vol. 266, pp. 205–10.10.1016/S0921-5093(99)00030-1 ↗