journal article·2019-08-15Open access

Network-Strengthened Ti-6Al-4V/(TiC+TiB) Composites: Powder Metallurgy Processing and Enhanced Tensile Properties at Elevated Temperatures

Shaolou Wei, Lujun Huang, Xinting Li, Yang Jiao, Wei Ren, Lin Geng

Abstract

Abstract Starting with graphite, TiB2, and Ti-6Al-4V powders, the present work demonstrated that hybrid (TiC+TiB) network-strengthened Ti-6Al-4V—based composites can be fabricated via an integrated low-energy ball-milling and reaction hot-pressing-sintering technique. With the aid of phase equilibrium and powder densification kinetic calculations, the corresponding sintering parameters were optimized and tunable network microstructures were subsequently achieved. Tensile properties for these composites were examined at elevated temperatures of 500 °C, 550 °C, 600 °C, and 650 °C, the results of which indicated that the 50-μm network configuration with 5 vol pct reinforcer content led to the most enhanced tensile strength compared to both Ti-6Al-4V alloys and solely TiB-reinforced Ti-6Al-4V composites. The underlying strengthening mechanisms were mainly ascribed to carbon interstitial dissolution, reinforcer-assisted grain refinement, and extensive dispersoids. It was recognized from fractographic analyses that the matrix/reinforce interface contributed to the major crack propagation source at temperatures below 550 °C, leading to brittlelike fracture along the network boundary; however, once testing temperatures rose above 600 °C, matrix tearing and reinforcer cut-through mechanisms took place, giving rise to ductile fracture. Based on the experimental observations and theoretical calculations, future perspectives regarding the processing and microstructural manipulation for advanced high-temperature titanium matrix composites were also discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Titanium Alloys Microstructure and Properties · Advanced materials and composites · Aluminum Alloys Composites Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (52)

Show source-provided references
1. 1.T.M. Pollock: Nat. Mater., 2016, vol. 15, pp. 809–15.10.1038/nmat4709 ↗
2. 2.A.L. Pilchak, G.A. Sargent, and S.L. Semiatin: Metall. Mater. Trans. A, 2018, vol. 49A, pp. 908–19.10.1007/s11661-017-4444-8 ↗
3. 3.R.J. Bennett, R. Krakow, A.S. Eggeman, C.N. Jones, H. Murakami, and C.M.F. Rae: Acta Mater., 2015, vol. 92, pp. 278–89.10.1016/j.actamat.2015.03.052 ↗
4. 4.A.M. Birt, V.K. Champagne, R.D. Sisson, and D. Apelian: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 1931–43.10.1007/s11661-017-3970-8 ↗
5. 5.S.L. Wei, L.J. Huang, X.T. Li, Q. An, and L. Geng: J. Alloys Compd., 2018, vol. 752, pp. 164–78.10.1016/j.jallcom.2018.04.118 ↗
6. 6.D.A. Brice, P. Samimi, I. Ghamarian, Y. Liu, R.M. Brice, R.F. Reidy, J.D. Cotton, M.J. Kaufman, and P.C. Collins: Corros. Sci., 2016, vol. 112, pp. 338–46.10.1016/j.corsci.2016.07.032 ↗
7. 7.Y. Niu, H. Hou, M. Li, and Z. Li: Mater. Sci. Eng. A, 2008, vol. 492, pp. 24–28.10.1016/j.msea.2008.02.036 ↗
8. 8.P.L. Narayana, S.W. Kim, J.K. Hong, N.S. Reddy, and J.T. Yeom: Mater. Sci. Eng. A, 2018, vol. 718, pp. 287–91.10.1016/j.msea.2018.01.113 ↗
9. 9.I.V. Okulov, M. Bönisch, A.V. Okulov, A.S. Volegov, H. Attar, S. Ehtemam-Haghighi, M. Calin, Z. Wang, A. Hohenwarter, I. Kaban, K.G. Prashanth, and J. Eckert: Mater. Sci. Eng. A, 2018, vol. 733, pp. 80–86.10.1016/j.msea.2018.07.047 ↗
10. 10.L.Y. Du, L. Wang, W. Zhai, L. Hu, J.M. Liu, and B. Wei: Mater. Des., 2018, vol. 160, pp. 48–57.10.1016/j.matdes.2018.08.043 ↗
11. 11.T.M. Butler, C.A. Brice, W.A. Tayon, S.L. Semiatin, and A.L. Pilchak: Metall. Mater. Trans. A, 2017, vol. 48A, pp. 4441–46.10.1007/s11661-017-4219-2 ↗
12. 12.I.N. Maliutina, H. Si-Mohand, R. Piolet, F. Missemer, A.I. Popelyukh, N.S. Belousova, and P. Bertrand: Metall. Mater. Trans. A, 2016, vol. 47A, pp. 378–87.10.1007/s11661-015-3205-9 ↗
13. 13.I. Gurrappa and A.K. Gogia: Surf. Coat. Technol., 2001, vol. 139, pp. 216–21.10.1016/S0257-8972(00)01137-3 ↗
14. 14.C. Leyens, J.W. Van Liere, M. Peters, and W.A. Kaysser: Surf. Coat. Technol., 1998, vols. 108–109, pp. 30–35.10.1016/S0257-8972(98)00574-X ↗
15. 15.L.J. Huang, L. Geng, and H.X. Peng: Progr. Mater. Sci., 2015, vol. 71, pp. 93–168.
16. 16.C. Poletti, M. Balog, T. Schubert, V. Liedtke, and C. Edtmaier: Compos. Sci. Technol., 2008, vol. 68, pp. 2171–77.10.1016/j.compscitech.2008.03.018 ↗
17. 17.S.C. Tjong and Y.W. Mai: Compos. Sci. Technol., 2008, vol. 68, pp. 583–601.10.1016/j.compscitech.2007.07.016 ↗
18. 18.K.B. Panda and K.S.R. Chandran: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1371–85.10.1007/s11661-003-0249-z ↗
19. T.W. Clyne and P.J. Withers: An Introduction to Metal Matrix Composites. Cambridge University Press, Cambridge, 1995.
20. 20.J.C. Hanan, G.A. Swift, E. Üstündag, I.J. Beyerlein, J.D. Almer, U. Lienert, and D.R. Haeffner: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 3839–45.10.1007/s11661-002-0256-5 ↗
21. 21.K.M. Rahman, V.A. Vorontsov, S.M. Flitcroft, and D. Dye: Adv. Eng. Mater., 2017, vol. 19, pp. 3–8.10.1002/adem.201700027 ↗
22. 22.S. Mahesh and A. Mishra: Eng. Fract. Mech., 2018, vol. 194, pp. 86–104.10.1016/j.engfracmech.2018.03.015 ↗
23. 23.Y. Jiao, L. Huang, and L. Geng: J. Alloys Compd., 2018, vol. 767, pp. 1196–1215.10.1016/j.jallcom.2018.07.100 ↗
24. C. Leyens and M. Peters: Titanium and Titanium Alloys Fundamentals and Applications, John Wiley & Son, New York, 2003.10.1002/3527602119 ↗
25. F. Appel, J.D.H. Paul, and M. Oehering: Gamma Titanium Aluminide Alloys Science and Technology. Wiley, New York, 2011.10.1002/9783527636204 ↗
26. 26.Y. Li, L. Xiao, W. Lu, J. Qin, and D. Zhang: Mater. Sci. Eng. A, 2008, vol. 488, pp. 415–19.10.1016/j.msea.2007.11.028 ↗
27. 27.B.J. Choi, I.Y. Kim, Y.Z. Lee, and Y.J. Kim: Wear, 2014, vol. 318, pp. 68–77.10.1016/j.wear.2014.05.013 ↗
28. 28.J.P. Qu, C.J. Zhang, J.C. Han, S.Z. Zhang, F. Yang, and Y.Y. Chen: Vacuum, 2017, vol. 144, pp. 203–06.10.1016/j.vacuum.2017.08.001 ↗
29. 29.L.J. Huang, L. Geng, A.B. Li, F.Y. Yang, and H.X. Peng: Scripta Mater., 2009, vol. 60, pp. 996–99.10.1016/j.scriptamat.2009.02.032 ↗
30. 30.S. Wang, L.J. Huang, L. Geng, F. Scarpa, Y. Jiao, and H.X. Peng: Sci. Rep., 2017, vol. 7, pp. 1–13.10.1038/s41598-016-0028-x ↗
31. 31.Y. Jiao, L.J. Huang, S.L. Wei, L. Geng, M.F. Qian, and S. Yue: Corros. Sci., 2018, vol. 140, pp. 223–30.10.1016/j.corsci.2018.05.043 ↗
32. 32.H. Rastegari and S.M. Abbasi: Mater. Sci. Eng. A, 2013, vol. 564, pp. 473–77.10.1016/j.msea.2012.12.011 ↗
33. 33.Z. Yang, H. Huan, C. Jiang, W. Li, X. Liu, and S. Lyu: Thin Solid Films, 2011, vol. 519, pp. 4804–08.10.1016/j.tsf.2011.01.034 ↗
34. 34.L. Xie, Q. Zhou, X. Jin, Z. Wang, C. Jiang, W. Lu, J. Wang, and Q. Jane Wang: Int. J. Fatigue, 2014, vol. 66, pp. 127–37.10.1016/j.ijfatigue.2014.03.019 ↗
35. S.J. Kang: Sintering: Densification, Grain Growth, and Microstructure. Elsevier, Anmsterdam, 2005.
36. R.W. Balluffi, S.M. Allen, and W.C. Carter: Kinetics of Materials, Wiley, Cambridge, 2005.10.1002/0471749311 ↗
37. 37.L.J. Huang, L. Geng, H.X. Peng, and B. Kaveendran: Mater. Sci. Eng. A, 2012, vol. 534, pp. 688–92.10.1016/j.msea.2011.12.028 ↗
38. 38.S. Balachandran, S. Kumar, and D. Banerjee: Acta Mater., 2017, vol. 131, pp. 423–34.10.1016/j.actamat.2017.04.008 ↗
39. 39.S.L. Wei, L.J. Huang, J. Chang, W. Zhai, S.J. Yang, and L. Geng: Mater. Lett., 2016, vol. 175, pp. 291–95.10.1016/j.matlet.2016.04.043 ↗
40. 40.E. Nes, N. Ryum, and O. Hunderi: Acta Mater., 1985, vol. 33, pp. 11–22.10.1016/0001-6160(85)90214-7 ↗
41. 41.A. Takeuchi and A. Inoue: Mater. Trans., 2005, vol. 45, pp. 2817–29.10.2320/matertrans.46.2817 ↗
42. 42.R.L. Fleischer: Acta Metall., 1962, vol. 10, pp. 835–42.10.1016/0001-6160(62)90098-6 ↗
43. 43.E.O. Hall: Proc. Phys. Soc. Sect. B, 1951, vol. 64, p. 747.10.1088/0370-1301/64/9/303 ↗
44. 44.R.L. Jones and H. Conrad: Trans. AIME, 1969, vol. 245, pp. 779–89.
45. 45.K.Y. Wang, T.D. Shen, M.X. Quan, and W.D. Wei: J. Mater. Sci. Lett., 1993, vol. 12, pp. 1818–20.10.1007/BF00539997 ↗
46. 46.A.A. Popov, I.Y. Pyshmintsev, S.L. Demakov, A.G. Illarionov, T.C. Lowe, A.V. Sergeyeva, and R.Z. Valiev: Scripta Mater., 1997, vol. 37, pp. 1089–94.10.1016/S1359-6462(97)00210-8 ↗
47. 47.R.J. Lederich, S.M.L. Sastry, E.J. O’Neal, and B.B. Rath: Mater. Sci. Eng., 1978, vol. 33, pp. 183–88.10.1016/0025-5416(78)90171-4 ↗
48. A. Argon: Strengthening Mechanisms in Crystal Plasticity. Oxford University Press, Oxford, 2012.
49. M.R. Akbarpour, E. Salahi, F. A. Hesari, H.S. Kim, and A. Simchi: Mater. Des., 2013, vol. 52, pp. 881–87.10.1016/j.matdes.2013.05.072 ↗
50. 50.A.A. Griffith: Phil. Trans. Ser. A, 1920, vol. 221, pp. 163–98.
51. 51.M. Wang, Z. Yang, B. Ji, F. Zhu, L. Xiao, W. Lu, J. Qin, and D. Zhang: Mater. Sci. Eng. A, 2008, vol. 491, pp. 192–98.10.1016/j.msea.2008.01.077 ↗
52. 52.C.J. Zhang, F.T. Kong, S.L. Xiao, E.T. Zhao, L.J. Xu, and Y.Y. Chen: Mater. Sci. Eng. A, 2012, vol. 548, pp. 152–60.10.1016/j.msea.2012.04.004 ↗