journal article·2004-03

Deformation and damage mechanisms of zinc coatings on hot-dip galvanized steel sheets: Part I. Deformation modes

Rodolphe Parisot, Samuel Forest, André Pineau, François Grillon, Xavier Demonet, Jean-Michel Mataigne

Publisher page

Abstract

International audience ; Zinc-based coatings are widely used for protection against corrosion of steel-sheet products in the automotive industry. The objective of the present article is to investigate the deformation modes at work in three different microstructures of a thin (8 µm) zinc coating on an interstitial-free steel substrate under tension, plane-strain tension, and expansion loading. Damage mechanisms are addressed in a companion article. The plastic slip and twinning activity in the zinc grains of an untempered cold-rolled coating (labeled NSK), a tempered cold-rolled coating (labeled SK), and a recrystallized coating are compared with the response of the corresponding bulk low-alloyed zinc material. The in-plane grain size in the NSK and SK coatings ranges from 300 to 600 µm, vs about 30 µm in the recrystallized coating and bulk material. The coatings exhibit a strong crystallographic texture, with the c-axis generally normal to the sheet plane. Basal slip is shown to be the main deformation mechanism in bulk zinc and the recrystallized coating, whereas pyramidal π2 slip and mechanical twinning are found to be major modes in the NSK and SK coatings. These results, obtained from an extensive, quantitative slip-line analysis combined with electron backscattered diffraction (EBSD) measurements, are explained by the constraining effect of the substrate. This effect is successfully modeled using a simple Taylor-like polycrystalline approach. The recrystallized coating behaves much like the bulk material. The interpretation of this grain-size effect between the NSK and SK coating, on the one hand, and the recrystallized coating, on the other hand, requires a full three-dimensional finite-element analysis of the multicrystalline coating provided in this work. The simulations show that strong strain gradients can develop in the recrystallized coating from the interface to the surface, which is not the case in the NSK and SK coatings.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Corrosion Behavior and Inhibition · Metal and Thin Film Mechanics · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (34)

Show source-provided references
1. S. Lazik, C. Esling, and J. Wegria: Text. Microstr., 1996, vol. 23, pp. 131–47.10.1155/TSM.23.131 ↗
2. A.R. Marder: Progr. Mater. Sci., 2000, vol. 45, pp. 191–271.10.1016/S0079-6425(98)00006-1 ↗
3. J. Lietzau, M.J. Philippe, C. Esling, J. Wegria, and M. Dubois: in Zinc-Based Steel Coating Systems, F.E. Goodwin, ed., TMS, Warrendale, PA, 1998, pp. 207–17.
4. C. Maeda, J. Shimomura, H. Fujisawa, and M. Konishi: Scripta Metall., 1996, vol. 35, pp. 333–38.10.1016/1359-6462(96)00160-1 ↗
5. R. Parisot, S. Forest, A. Pineau, F. Nguyen, X. Démonet, and J. M. Mataigne: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 813–23.10.1007/s11661-004-0008-9 ↗
6. P.G. Partridge: Met. Rev., 1957, vol. 12, pp. 169–94.10.1179/imr.1967.12.1.169 ↗
7. R.L. Bell and R.W. Cahn: Proc. R. Soc. A, 1956, vol. 239, pp. 494–520.
8. E.J. Stofel and D.S. Wood: in Fracture of Solids, Metallurgical Society Conf., Aug. 21–24, 1963, vol. 20, pp. 521–39.
9. C. Tomé and U.F. Kocks. Acta Mater., 1985, vol. 33, pp. 603–21.10.1016/0001-6160(85)90025-2 ↗
10. R. Parisot, S. Forest, A.-F. Gourgues, A. Pineau, and D. Mareuse: Comput. Mater. Sci., 2001, vol. 19, pp. 189–204.10.1016/S0927-0256(00)00155-5 ↗
11. Y. Leprêtre, J.-M. Mataigne, M. Guttmann, and J. Philibert: in Zinc-Based Steel Coating Systems, F.E., Goodwin ed., TMS, Warrendale, PA, 1998, pp. 95–106.
12. N.Y. Tang: in Zinc-Based Steel Coating Systems, F.E. Goodwin, ed., TMS, Warrendale, PA, 1998, pp. 3–12.
13. J. Strutzenberger and J. Faderl: Metall. Mater. Trans. A, 1998, vol. 29, pp. 631–46.10.1007/s11661-998-0144-8 ↗
14. J.W. Christian: The Theory of Transformation in Metals and Alloys, Pergamon Press, Elmsford, NJ, 1965.
15. D.H. Rogers and W.T. Roberts: Int. J. Mech. Sci., 1968, vol. 10, pp. 221–29.10.1016/0020-7403(68)90081-7 ↗
16. A.-F. Gourgues: Mater. Sci. Technol., 2002, vol. 18, pp. 119–33.10.1179/026708301125000320 ↗
17. R. Parisot, S. Forest, A. Pineau, and X. Démonet: in Advance in Mechanical Behaviour, Plasticity and Damage—Euromat 2000, D. Miannay, P. Costa, D. François, and A. Pineau, ed., 2000, vol. 1, pp. 407–12.
18. K.M. Jassby and T.J. Vreeland: Mater. Sci. Eng., 1977, vol. 27, pp. 1–9.10.1016/0025-5416(77)90187-2 ↗
19. F.F. Lavrentev, O.P. Salita, and V.L. Vladimirova: Phys. Status Solidi, 1968, vol. 29, pp. 569–74.10.1002/pssb.19680290206 ↗
20. J.J. Gilman: Trans. TMS-AIME, 1958, vol. 200, pp. 783–91.
21. J.J. Fundenberger, M.J. Philippe, F. Wagner, and C. Esling: Acta Mater., 1997, vol. 45, pp. 4041–55.10.1016/S1359-6454(97)00099-2 ↗
22. D.E. Solas, C.N. Tomé, O. Engler, and H.R. Wenk: Acta Mater., 2001, vol. 49, pp. 3791–3801.10.1016/S1359-6454(01)00261-0 ↗
23. U.F. Kocks and G.R. Canova: in Deformation of Polycrystals, Hansen et al., eds., Risø National Laboratory, Roskilde, Denmark, 1981, pp. 35–44.
24. P. Van Houtte: in ICOTOM 6, S. Nagashima, ed., The Iron and Steel Institute of Japan, Tokyo, 1981, pp. 428–37.
25. R.J. Asaro: J. Appl. Mech., 1983, vol. 50, pp. 921–34.10.1115/1.3167205 ↗
26. H.J. Frost and M.F. Ashby: Deformation-Mechanism Maps, The Plasticity and Creep of Metals and Ceramics, Pergamon Press, Elmsford, NJ, 1982.
27. Z-set package. www.nwnumerics.com, www.mat.ensmp.fr., 2001.
28. R. Becker and S. Panchanadeeswaran: Acta Metall. Mater., 1995, vol. 43, pp. 2701–19.10.1016/0956-7151(94)00460-Y ↗
29. Rodolphe Parisot: Ph.D. Thesis, Ecole des Mines de Paris, Evry, 2001.
30. R. Becker: Acta Mater., 1998, vol. 46, pp. 1385–1401.10.1016/S1359-6454(97)00182-1 ↗
31. E.H. Edwards and J. Washburn: Trans. TMS-AIME, 1954, vol. 200, pp. 1239–42.
32. M.E. Bosin, F.F. Lavrentev, and V.N. Nikiforenko: Phys. Solid State, 1996, vol. 38, pp. 1972–75.
33. K.H. Adams and T.J. Vreeland: Trans. TMS-AIME, 1968, vol. 242, pp. 132–39.
34. F. Barbe, R. Parisot, S. Forest, and G. Cailletaud: J. Phys. IV, 2001, vol. 11, pp. Pr5-277–Pr5-284.