journal article·2018-10Open access

Correlation of Microstructure to Creep Response of Hot Isostatically Pressed and Aged Electron Beam Melted Inconel 718

Benjamin Shassere, Duncan Greeley, Alfred Okello, Michael Kirka, Peeyush Nandwana, Ryan Dehoff

Abstract

Creep rupture samples were fabricated by additive manufacturing (AM) via electron beam melting (EBM) to study the effects of grain morphology (equiaxed/columnar grains) and loading direction (longitudinal/transverse) with respect to build direction on creep deformation at 923 K (650 °C) with applied stresses of 580 and 600 MPa. The observed minimum creep rates and creep rupture lives of EBM Inconel 718 after post-processing by hot isostatic pressing (HIP) were found to be comparable to wrought material. The material with equiaxed grains exhibited low creep strain (2 pct) and short creep lifetimes (800 hours), whereas longer times (approximately 4500 hours) and high creep strain (up to 23 pct) were observed for material with columnar grains. The high stress exponent (n > 14) reflected the resistance to dislocation motion by γ” particles during creep. A precipitate-free zone (PFZ) was observed around the grain boundary δ phase. Creep damage occurred as voids and cracks in the PFZ. Optimal post-processing of EBM Inconel 718 material should be explored to prevent δ phase embrittlement.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Additive Manufacturing Materials and Processes · High Temperature Alloys and Creep · Nuclear Materials and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (46)

Show source-provided references
1. R. C. Reed, The Superalloys: Fundamentals and Applications, Cambridge University Press, Cambridge, 2006.10.1017/CBO9780511541285 ↗
2. H.J. Wagner and A.M. Hall: Physical metallurgy of alloy 718, No. DMIC-217, Defense Metals Information Center, Battelle Memorial Institute, Columbus, OH, 1965.10.21236/AD0466476 ↗
3. A. Lingenfelter: Superalloy, 1989, 718, 673-83.10.7449/1989/Superalloys_1989_673_683 ↗
4. J.F. Radavich: in Conference Proceedings on Superalloy, 1989, pp. 229–40.
5. K. Sano, N. Oono, S. Ukai, S. Hayashi, T. Inoue, S. Yamashita and T. Yoshitake: J. Nucl. Mater., 2013, 442, 389-93.10.1016/j.jnucmat.2013.07.037 ↗
6. M. Burke and M. Miller: ed. EA Loria, Minerals, Met. And Mat. Society, 1991, pp. 447–56.
7. S. Li, J. Zhuang, J. Yang and X. Xie, Superalloys, 1994, 718, 625-706.
8. S. Azadian, L.-Y. Wei and R. Warren, Mater. Charact., 2004, 53, 7–16.10.1016/j.matchar.2004.07.004 ↗
9. M. Anderson, A. L. Thielin, F. Bridier, P. Bocher and J. Savoie, Mater. Sci. Eng: A, 2017, 679, 48–55.10.1016/j.msea.2016.09.114 ↗
10. I. Gibson, D. W. Rosen and B. Stucker: in Additive Manufacturing Technologies. Springer, Berlin, 2010, pp. 299–32.10.1007/978-1-4419-1120-9 ↗
11. K. N. Amato, S. M. Gaytan, L. E. Murr, E. Martinez, P. W. Shindo, J. Hernandez, S. Collins and F. Medina, Acta Mater., 2012, 60, 2229-39.10.1016/j.actamat.2011.12.032 ↗
12. W. J. Sames, K. A. Unocic, R. R. Dehoff, T. Lolla and S. S. Babu, J. Mater. Res., 2014, 29, 1920-30.10.1557/jmr.2014.140 ↗
13. Y. Tian, D. McAllister, H. Colijn, M. Mills, D. Farson, M. Nordin and S. Babu, Metall. Mater. Trans. A, 2014, 45, 4470-83.10.1007/s11661-014-2370-6 ↗
14. M. Kirka, K. Unocic, N. Raghavan, F. Medina, R. Dehoff and S. Babu, JOM, 2016, 68, 1012-20.10.1007/s11837-016-1812-6 ↗
15. M. M. Kirka, F. Medina, R. Dehoff and A. Okello, Mater. Sci. Eng: A, 2017, 680, 338-46.10.1016/j.msea.2016.10.069 ↗
16. M. M. Kirka, Y. Lee, D. A. Greeley, A. Okello, M. J. Goin, M. T. Pearce and R. R. Dehoff, JOM, 2017, 69, 523-31.10.1007/s11837-017-2264-3 ↗
17. Special_Metals: Special Metals Corporation, 2007, 045, pp. 1–28.
18. ASTM-E139-11: ASTM International, 2011.
19. W. Chen and M. Chaturvedi: Mater. Sci. Eng: A, 1994, 183, 81-89.10.1016/0921-5093(94)90892-3 ↗
20. R. Hayes: Superalloys 718, 625 and Various Derivatives, 549–61.
21. F. VerSnyder and R. Guard: Trans. ASM, 1960, 52, 485.
22. G. Edward and M. F. Ashby, Acta Metall Mater, 1979, 27, 1505-18.10.1016/0001-6160(79)90173-1 ↗
23. T. Lillo, J. Cole, M. Frary and S. Schlegel, Metall. Mater. Trans. A, 2009, 40, 2803.10.1007/s11661-009-0051-7 ↗
24. B. Kear and B. Piearcey: Aime, Trans, 1967, 239, 1209-15.
25. C. Brinkman, M. Booker and J. Ding, Superalloys, 1991, 718, 519-36.10.7449/1991/Superalloys_1991_519_536 ↗
26. G. Korth and G. Smolik, Idaho National Engineering Lab., Idaho Falls (USA), 1978.
27. Deparment-of-Defense: Military Handbook, 1998, 5, 1–1653.
28. Y.-L. Kuo, S. Horikawa and K. Kakehi: Scr. Mater., 2017, 129, 74-78.10.1016/j.scriptamat.2016.10.035 ↗
29. S. Antolovich: in Proceedings of the International Symposium on the Metallurgy and Applications of Superalloy 718, 1989, pp. 647–53.10.7449/1989/Superalloys_1989_647_653 ↗
30. G. A. Rao, M. Kumar, M. Srinivas and D. Sarma, Mater. Sci. Eng: A, 2003, 355, 114-25.10.1016/S0921-5093(03)00079-0 ↗
31. F. H. Norton, The Creep of Steel at High Temperatures, McGraw-Hill Book Company, Incorporated, 1929.
32. H. Burt and B. Wilshire, Metall. Mater. Trans. A, 2004, 35, 1691.10.1007/s11661-004-0078-8 ↗
33. S. Spigarelli, E. Cerri, P. Bianchi and E. Evangelista, Mater. Sci. Tech., 1999, 15, 1433-40.10.1179/026708399101505428 ↗
34. T. Shrestha, M. Basirat, I. Charit, G. P. Potirniche, K. K. Rink and U. Sahaym, J. Nucl. Mater., 2012, 423, 110–19.10.1016/j.jnucmat.2012.01.005 ↗
35. T. G. Langdon and F. A. Mohamed, J of Mat Sci, 1978, 13, 1282–90.10.1007/BF00544735 ↗
36. J. Čadek, Mater. Sci. Eng., 1987, 94, 79–92.10.1016/0025-5416(87)90324-7 ↗
37. Y. Han and M. Chaturvedi, Mater. Sci. Eng., 1987, 85, 59–65.10.1016/0025-5416(87)90467-8 ↗
38. B. A. Shassere, Y. Yamamoto and S. S. Babu, Metall. Mater. Trans. A, 2016, 47, 2188–2200.10.1007/s11661-016-3387-9 ↗
39. B. Burton, Mater. Sci. Eng., 1973, 11, 33710.1016/0025-5416(73)90124-9 ↗
40. G. L. Dunlop, J. O. Nilsson and P. R. Howell, J. Microsc-Oxford, 1979, 116, 115-22.10.1111/j.1365-2818.1979.tb00195.x ↗
41. J. Harris, Metal. Sci. J., 1973, 7, 1-6.10.1179/030634573790445514 ↗
42. F. A. Mohamed and T. G. Langdon, Acta Metall. Mater., 1974, 22, 779-88.10.1016/0001-6160(74)90088-1 ↗
43. A. J. Perry, J of Mater. Sci., 1974, 9, 1016-39.10.1007/BF00570398 ↗
44. J. Wadsworth, O. A. Ruano and O. D. Sherby, Metall. Mater. Trans. A, 2002, 33, 219-29.10.1007/s11661-002-0084-7 ↗
45. W. Chen and M. Chaturvedi, Acta Mater., 1997, 45, 2735-746.10.1016/S1359-6454(96)00399-0 ↗
46. B. Shassere, Y. Yamamoto, J. Poplawsky, W. Guo and S. S. Babu, Metall. Mater. Trans. A, 2017, 48, 4598-614.10.1007/s11661-017-4274-8 ↗