On the Effect of Nb on the Microstructure and Properties of Next Generation Polycrystalline Powder Metallurgy Ni-Based Superalloys
Source abstract
Abstract
Abstract The effect of Nb on the properties and microstructure of two novel powder metallurgy (P/M) Ni-based superalloys was evaluated, and the results critically compared with the Rolls-Royce alloy RR1000. The Nb-containing alloy was found to exhibit improved tensile and creep properties as well as superior oxidation resistance compared with both RR1000 and the Nb-free variant tested. The beneficial effect of Nb on the tensile and creep properties was due to the microstructures obtained following the post-solution heat treatments, which led to a higher γ′ volume fraction and a finer tertiary γ′ distribution. In addition, an increase in the anti-phase-boundary energy of the γ′ phase is also expected with the addition of Nb, further contributing to the strength of the material. However, these modifications in the γ′ distribution detrimentally affect the dwell fatigue crack-growth behavior of the material, although this behavior can be improved through modified heat treatments. The oxidation resistance of the Nb-containing alloy was also enhanced as Nb is believed to accelerate the formation of a defect-free Cr2O3scale. Overall, both developmental alloys, with and without the addition of Nb, were found to exhibit superior properties than RR1000.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: High Temperature Alloys and Creep · Intermetallics and Advanced Alloy Properties · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. European Commission: European Aeronautics: a Vision for 2020, 1st edition, Office for publications of the European Communities, Luxembourg, 2001, pp. 14.
2. European Commission: Flightpath 2050 Europe’s Vision for Aviation, 1st edition, Publications office of the European Union, Luxembourg, 2011, pp. 15.
3. M.C. Hardy, H.J. Stone, N.G. Jones, K.A. Christofidou, and S. Neumeier, A Nickel Alloy, European Patent EP 3 042 973 B1, 2017.
4. H. Bibring and R. Graf: Academie Des Sciences, Physique des Métaux, 1961, pp. 4160–62.
5. R. W. Fountain and W. D. Forgeng: Trans. Metall. Soc. AIME, 1959, vol. 215, pp. 998-1008.
6. T. Takasugi, S. Hirakawa, O. Izumi, S. Ono, and S. Watanabe: Acta Metall., 1987, vol. 35, pp. 2015-2026.10.1016/0001-6160(87)90030-7 ↗
7. J. M. Blaise, P. Viatour, and J. M. Drapier: Cobalt, 1970, vol. 49, pp. 192-195.
8. P. Viatour, J. M. Drapier, and D. Coutsouradis: Cobalt, 1973, vol. 3, pp. 67-74.
9. C. Rogister, D. Coutsouradis, and L. Habraken: Cobalt, 1967, vol. 34, pp. 3-10.
10. C. H. Zenk, I. Povstugar, R. Li, F. Rinaldi, S. Neumeier, D. Raabe, and M. Göken: Acta Mater., 2017, vol. 135, pp. 244-251.10.1016/j.actamat.2017.06.024 ↗
11. C. Y. Cui, A. Sato, Y. Gu, and H. Harada: Metall. Mater. Trans. A, 2005, vol. 36, pp. 2921-2927.
12. C. Y. Cui, A. Sato, Y. F. Gu, D. H. Ping, and H. Harada: Metall. Mater. Trans. A, 2006, vol. 37, pp. 3183-3190.10.1007/BF02586152 ↗
13. C. Y. Cui, Y. F. Gu, D. H. Ping, T. Fukuda, and H. Harada: Mater. Trans., 2008, vol. 49, pp. 424-427 .10.2320/matertrans.MBW200703 ↗
14. Y. Gu, H. Harada, C. Cui, D. Ping, A. Sato, and J. Fujioka: Scr. Mater., 2006, vol. 55, pp. 815-818 .10.1016/j.scriptamat.2006.07.008 ↗
15. Y. F. Gu, T. Fukuda, C. Cui, H. Harada, A. Mitsuhashi, T. Yokokawa, J. Fujioka, Y. Koizumi, and T. Kobayashi: Metall. Mater. Trans. A, 2009, vol. 40, pp. 3047-3050.10.1007/s11661-009-0032-x ↗
16. N. G. Jones, K. A. Christofidou, P. M. Mignanelli, J. P. Minshull, M. C. Hardy, and H. J. Stone: Mater. Sci. Technol., 2014, vol. 30, pp. 1853-1861.10.1179/1743284714Y.0000000509 ↗
17. S. Cruchley, H. E. Evans, M. P. Taylor, M. C. Hardy, and S. Stekovic: Corros. Sci., 2013, vol. 75, pp. 58-66.10.1016/j.corsci.2013.05.016 ↗
18. C. T. Sims, N. S. Stoloff, and W. C. Hagel, editors, Superalloys II, First Edition, Wiley, New York, 1987, pp. 104-110.
19. A. K. Jena and M. C. Chaturvedi: J. Mater. Sci., 1984, vol. 19, pp. 3121-3139.10.1007/BF00549796 ↗
20. P. M. Mignanelli, N. G. Jones, M. C. Hardy, and H. J. Stone: Mater. Sci. Eng. A, 2014, vol. 612, pp. 179-186.10.1016/j.msea.2014.06.021 ↗
21. H. Hisazawa, Y. Terada, F. Adziman, D. Crudden, D. Collins, D. Armstrong, and R. Reed: Metals, 2017, vol. 7, pp. 71-82.10.3390/met7030071 ↗
22. E. C. Guo and F. J. Ma: Superalloys 1980 (Fourth International Symposium), 1980, pp. 431–38.10.7449/1980/Superalloys_1980_431_438 ↗
23. S. Antonov, M. Detrois, D. Isheim, D. Seidman, R. C. Helmink, R. L. Goetz, E. Sun, and S. Tin: Mater. Des., 2015, vol. 86, pp. 649-655.10.1016/j.matdes.2015.07.171 ↗
24. S. Antonov, J. Huo, Q. Feng, D. Isheim, D. N. Seidman, R. C. Helmink, E. Sun, and S. Tin: Mater. Sci. Eng. A, 2017, vol. 687, pp. 232-240.10.1016/j.msea.2017.01.064 ↗
25. S. Antonov, J. Huo, Q. Feng, D. Isheim, D. N. Seidman, R. C. Helmink, E. Sun, and S. Tin: Scr. Mater., 2017, vol. 138, pp. 1-4.10.1016/j.scriptamat.2017.05.028 ↗
26. C. T. Sims: High Temp. Technol., vol. 2, pp. 185-201.10.1080/02619180.1984.11753263 ↗
27. M. Gao, D. J. Dwyer, and R. P. Wei: in Superalloys 718, 625, 706 and Various Derivatives, 1994, pp. 581–92.10.7449/1994/Superalloys_1994_581_592 ↗
28. F. Weng, H. Yu, C. Chen, and K. Wan: Surf. Interface Anal., 2014, vol. 47, pp. 362-370.10.1002/sia.5718 ↗
29. F. Weng, H. Yu, K. Wan, and C. Chen: J. Mater. Res., 2014, vol. 29, pp. 2596-2603.10.1557/jmr.2014.282 ↗
30. K. A. Christofidou, N. G. Jones, E. J. Pickering, R. Flacau, M. C. Hardy, and H. J. Stone: J. Alloys Compd. 2016, vol. 688, pp. 542-552.10.1016/j.jallcom.2016.07.159 ↗
31. M. P. Taylor, H. E. Evans, S. Stekovic, and M. C. Hardy: Mater. High Temp., 2012, vol. 29, pp. 145-150.10.3184/096034012X13341417107382 ↗
32. S. Cruchley, M. P. Taylor, H. E. Evans, M. C. Hardy, and D. J. Child: Mater. Sci. Technol., 2014, vol. 30, pp. 1884-1889.10.1179/1743284714Y.0000000541 ↗
33. S. I. Parthasarathy, D. M. Rao, D. Dimiduk: Superalloys 2004 (Tenth International Symposium), 2004, pp. 887–96.10.7449/2004/Superalloys_2004_887_896 ↗
34. L. A. Gypen and A. Deruyttere: J. Mater. Sci., 1977, vol. 12, pp. 1028-1033.10.1007/BF00540987 ↗
35. Y. Mishima, S. Ochiai, N. Hamao, M. Yodogawa, and T. Suzuki: Trans. Jpn. Inst. Met., 1986, vol. 27, pp. 648-655.10.2320/matertrans1960.27.648 ↗
36. H. A. Roth, C. L. Davis, and R. C. Thomson: Metall. Mater. Trans. A, 1997, vol. 28, pp. 1329-1335.10.1007/s11661-997-0268-2 ↗
37. D. J. Crudden, A. Mottura, N. Warnken, B. Raeisinia, and R. C. Reed: Acta Mater., 2014, vol. 75, pp. 356-370.10.1016/j.actamat.2014.04.075 ↗
38. E. I. Galindo-Nava and C. M. F. Rae: Mater. Sci. Eng. A, 2016, vol. 651, pp. 116-126.10.1016/j.msea.2015.10.088 ↗
39. C. Wagner: Z. Elektrochem., 1961, vol. 65, pp. 581-591.
40. L. C. Brown: Acta Metall., 1989, vol. 37, pp. 71-77.10.1016/0001-6160(89)90267-8 ↗
41. H. Y. Li, J. F. Sun, M. C. Hardy, H. E. Evans, S. J. Williams, T. J. A. Doel, and P. Bowen: Acta Mater., 2015, vol. 90, pp. 355-369.10.1016/j.actamat.2015.02.023 ↗
42. S. W. Yang: Oxid. Met., 1981, vol. 15, pp. 375-397.10.1007/BF00603531 ↗
43. S.-J. Park, S.-M. Seo, Y. S. Yoo, H. W. Jeong, and H. Jang: Corros. Sci., 2015, vol. 90, pp. 305-312.10.1016/j.corsci.2014.10.025 ↗
44. S.-J. Park, S.-M. Seo, Y. S. Yoo, H. W. Jeong, and H. Jang: J. Nanomater., 2015, vol. 2015, pp. 1-11.
45. S. C. H. Llewelyn, K. A. Christofidou, V. J. Araullo-Peters, N. G. Jones, M. C. Hardy, E. A. Marquis, and H. J. Stone: Acta Mater., 2017, vol. 131, pp. 296-04.10.1016/j.actamat.2017.03.067 ↗
46. M. C. Hardy, B. Zirbel, G. Shen, and R. Shenkar: Superalloys 2004 (Tenth International Symposium), 2004, pp. 83–90.10.7449/2004/Superalloys_2004_83_90 ↗