journal article·2014-03

Modeling the Effects of Strand Surface Bulging and Mechanical Softreduction on the Macrosegregation Formation in Steel Continuous Casting

Josef Domitner, Menghuai Wu, Abdellah Kharicha, Andreas Ludwig, Bernhard Kaufmann, Jürgen Reiter, Thomas Schaden

Publisher page

Abstract

Positive centerline macrosegregation is an undesired casting defect that frequently occurs in the continuous casting process of steel strands. Mechanical softreduction (MSR) is a generally applied technology to avoid this casting defect in steel production. In the current paper, the mechanism of MSR is numerically examined. Therefore, two 25-m long horizontal continuous casting strand geometries of industrial scale are modeled. Both of these strand geometries have periodically bulged surfaces, but only one of them considers the cross-section reduction due to a certain MSR configuration. The macrosegregation formation inside of these strands with and without MSR is studied for a binary Fe-C-alloy based on an Eulerian multiphase model. Comparing the macrosegregation patterns obtained for different casting speed definitions allows investigating the fundamental influence of feeding, bulging and MSR mechanisms on the formation of centerline macrosegregation.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Solidification and crystal growth phenomena · Metallurgical Processes and Thermodynamics · nanoparticles nucleation surface interactions

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. K. Schwerdtfeger: Metallurgie des Stranggießens - Gießen und Erstarren von Stahl, Verlag Stahleisen, Düsseldorf, Germany, 1992.
2. R. Thome and K. Harste: Steel Res. Int., 2004, vol. 75, pp. 693-700.10.1002/srin.200405830 ↗
3. R. Thome and K. Harste: ISIJ Int., 2006, vol. 46, pp. 1839-44.10.2355/isijinternational.46.1839 ↗
4. W. Bleck, W. Wang and R. Bülte: Steel Res. Int., 2006, vol. 77, pp. 485-91.10.1002/srin.200606418 ↗
5. H. Preßlinger, S. Ilie, P. Reisinger, A. Schiefermüller, A. Pissenberger, E. Parteder and C. Bernhard: ISIJ Int., 2006, vol. 46, pp. 1845-51.10.2355/isijinternational.46.1845 ↗
6. O. Bode, K. Schwerdtfeger, H.G. Geck and F. Höfer: Ironmak. Steelmak., 2008, vol. 35, pp. 137-45.10.1179/030192307X233511 ↗
7. S. Ogibayashi, M. Kobayashi, M. Yamada and T. Mukai: ISIJ Int., 1991, vol. 31, pp. 1400-07.10.2355/isijinternational.31.1400 ↗
8. C. Beckermann: ASM Handbook, Volume 15: Casting, ASM International, Materials Park, OH, 2008, pp. 348-52.
9. C. Beckermann: Int. Mater. Rev., 2002, vol. 47, pp. 243-61.10.1179/095066002225006557 ↗
10. M.C. Flemings and G.E. Nereo: Trans. Met. Soc. AIME, 1967, vol. 239, pp. 1449-61.
11. M.C. Flemings, R. Mehrabian and G.E. Nereo: Trans. Met. Soc. AIME, 1968, vol. 242, pp. 41-49.
12. M.C. Flemings and G.E. Nereo: Trans. Met. Soc. AIME, 1968, vol. 242, pp. 50-55.
13. K. Miyazawa and K. Schwerdtfeger: Arch. Eisenhüttenwesen, 1981, vol. 52, pp. 415-22.10.1002/srin.198104599 ↗
14. P. Stadler, K. Hagen, P. Hammerschmid and K. Schwerdtfeger: Stahl Eisen, 1982, vol. 102, pp. 451-59.
15. T. Kajitani, J.-M. Drezet and M. Rappaz: Metall. Mater. Trans. A, 2001, vol. 32A, pp. 1479-91.10.1007/s11661-001-0236-1 ↗
16. G. Lesoult: Mater. Sci. Eng. A, 2005, vol. 413-414, pp. 19-29.10.1016/j.msea.2005.08.203 ↗
17. F. Mayer, M. Wu, and A. Ludwig: in Modeling of Casting, Welding and Advanced Solidification Processes XII, S.L. Cockcroft and D.M. Maijer, eds., TMS, Warrendale, PA, 2009, pp. 279–86.
18. F. Mayer, M. Wu and A. Ludwig: Steel Res. Int., 2010, vol. 81, pp. 660-67.10.1002/srin.201000122 ↗
19. M. Wu, J. Domitner and A. Ludwig: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 945-64.10.1007/s11661-011-0940-4 ↗
20. A. Ludwig and M. Wu: Mater. Sci. Eng. A, 2005, vol. 413-414, pp. 109-14.10.1016/j.msea.2005.08.184 ↗
21. M. Wu and A. Ludwig: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 1613-31.10.1007/s11661-006-0104-0 ↗
22. M. Wu and A. Ludwig: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1465-75.10.1007/s11661-007-9175-9 ↗
23. J. Ni and C. Beckermann: Metall. Trans. B, 1991, vol. 22B, pp. 349-61.10.1007/BF02651234 ↗
24. C. Beckermann and R. Viskanta: Appl. Mech. Rev., 1993, vol. 46, pp. 1-27.10.1115/1.3120318 ↗
25. M.C. Schneider, J.P. Gu, C. Beckermann, W.J. Boettinger and U.R. Kattner: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1517-31.10.1007/s11661-997-0214-3 ↗
26. A.K. Dahle and D.H. StJohn: Acta Mater., 1999, vol. 47, pp. 31-41.10.1016/S1359-6454(98)00342-5 ↗
27. J. Domitner, J.-M. Drezet, M. Wu and A. Ludwig: IOP Conf. Ser.: Mater. Sci. Eng., 2012, vol. 33, 012058.
28. N.N.: voestalpine Stahl GmbH, Linz (unpublished research).