journal article·2003-09

Processing and characterization of plasma-sprayed ceramic coatings on steel substrate: Part I. On coating characteristics

S. Das, T. K. Bandyopadhyay, S. Ghosh, A. B. Chattopadhyay, P. P. Bandyopadhyay

Publisher page

Abstract

This investigation envisages the processing of a series of plasma-sprayed coatings from a few commercially available and inexpensive powders, namely, alumina (commercial grade, Indian), plasma-dissociated zircon (PDZ), zircon sand, and zircon-20 wt pct calcia. These powders do not belong to the so-called “plasma sprayable” grade, expensive powders. The microstructures and several properties of these coatings have been studied to evaluate their potential as thermal barrier and wear-resistant coatings. With an appropriate choice of processing condition, a sound and adherent ceramic coating is achievable using such powders. In some coatings, a layer of yttria has been applied between the top and bond coats with an aim to improve its thermal barrier properties. Such a layer does not disrupt the interfacial continuity of the coatings. The powders have been found to undergo phase transformations during spraying, subsequent annealing, and also during tribological testing of the coatings. An understanding of such phase transformations is important for the interpretation of coating behavior during performance tests as wear-resistant and thermal barrier coatings. These responses are dealt with in Part II of this series of articles.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High-Temperature Coating Behaviors · Advanced ceramic materials synthesis · Advanced materials and composites

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (18)

Show source-provided references
1. Y. Wang: Wear, 1993, vol. 161, pp. 69–78.10.1016/0043-1648(93)90454-T ↗
2. K.G. Budinsky: Surface Engineering for Wear Resistance, 1st ed., Prentice-Hall, New York, NY, 1988, pp. 279–82.
3. R.B. Heiman: Plasma Spray Coating, Principles and Application, 1st ed., VCH, Weinheim, Germany, 1996, pp. 136–38.10.1002/9783527614851 ↗
4. P.P. Bandyopadhyay, S. Das, S. Madhusudan, and A.B. Chattopadhyay: J. Mater. Sci. Lett., 1999, vol. 18, pp. 727–29.10.1023/A:1006608715370 ↗
5. T.Z. Kattamis, M. Chen, R. Huie, J. Kelly, C. Fountzoulas, and M. Levy: J. Adhesion Sci. Technol., 1999, vol. 15 (6), pp. 908–21.
6. D. Chuanxian, H. Bingtang, and L. Huiling: Thin Solid Film, 1984, vol. 118, pp. 485–93.10.1016/0040-6090(84)90277-3 ↗
7. R. Sivakumar and M.P. Shrivastava: Oxid. Met., 1983, vol. 20 (3–4), pp. 67–73.10.1007/BF00662041 ↗
8. S.V. Joshi and M.P. Shrivastava: Surf. Eng., 1995, vol. 11 (3), pp. 233–39.10.1179/sur.1995.11.3.233 ↗
9. V.V. Sobolev, J.M. Guilamany, J. Nutting, and J.R. Miquel: Int. Mater. Rev., 1997, vol. 42 (3), pp. 117–36.10.1179/imr.1997.42.3.117 ↗
10. K.A. Venugopal, P.P. Bandyopadhyay, A.B. Chattopadhyay, and A.K. Chakrabarti: Surf. Eng., 1999, vol. 15 (6), pp. 465–68.10.1179/026708499101516867 ↗
11. J. Nutting, J.M. Guilamany, Z. Dong, and J.M. De Paco: Scripta Metall. Mater., 1995, vol. 33 (7), pp. 1055–62.10.1016/0956-716X(95)00324-O ↗
12. R. McPherson: J. Mater. Sci., 1973, vol. 8, pp. 851–58.10.1007/BF02397914 ↗
13. R. McPherson: J. Mater. Sci., 1980, vol. 15, pp. 3141–49.10.1007/BF00550387 ↗
14. P.D. Harmsworth and R. Stevens: J. Mater. Sci., 1992, vol. 27, pp. 616–24.10.1007/BF02403869 ↗
15. U. Shyamaprasad, S. Bhattacharjee, R.K. Galgali, and B.C. Mohanty: Ceramic Powder for High Tech Application, 1st ed., Universities Press, Hyderabad, India, 1995, pp. 17–33.
16. R.W. Canon: Structural Ceramics, Academic Press, New York, NY, 1989, pp. 195–228.10.1016/B978-0-12-341829-6.50010-4 ↗
17. S. Das, P.P. Bandyopadhyay, S. Ghosh, T.K. Bandyopadhyay, and A.B. Chattopadhyay: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 1919–30.10.1007/s11661-003-0157-2 ↗
18. J.P.H. Willamson and A.R. Evans: Trans. J. Br. Cer. Soc., 1979, vol. 78, pp. 68–72.