journal article·2007-09

Creep Strain Modeling of 9 to 12 Pct Cr Steels Based on Microstructure Evolution

Hans Magnusson, Rolf Sandström

Publisher page

Abstract

Creep deformation is simulated for 9 pct Cr steels by using the Norton equation with the addition of back stresses from dislocations and precipitates. The composite model is used to represent the heterogeneous dislocation structure found in 9 to 12 pct Cr steels. Dislocation evolution is modeled by taking capturing and annihilation of free dislocations into account. Recovery of immobile dislocations is derived from the ability of dislocation climb. In spite of the fact that the initial dislocation density is high and is reduced during creep, primary creep is successfully modeled for a P92 steel. Subgrain growth is evaluated using a model by Sandstrom (1977). The long time subgrain size corresponds well to a frequently used empirical relation, with subgrain size inversely proportional to the applied stress.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: High Temperature Alloys and Creep · Microstructure and mechanical properties · Microstructure and Mechanical Properties of Steels

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (28)

Show source-provided references
1. I.J. Perrin, J.D. Fishburn: Creep and Fracture in High Temperature Components—Design and Life Assessment Issues, DEStech Publications Inc., Lancaster, PA, 2005, pp. 46–56
2. H. Magnusson and R. Sandström: Metall. Mater. Trans. A, in press.
3. R. Sedláček, W. Blum: Comput. Mater. Sci., 2002, vol. 25, pp. 200–0610.1016/S0927-0256(02)00264-1 ↗
4. T. Barkar, J. Ågren: Mater. Sci. Eng., 2005, vol. A395, pp. 110–1510.1016/j.msea.2004.12.004 ↗
5. T. Sailer: Doctoral Thesis, University Erlangen-Nuremberg, Erlangen, Germany, 1998
6. P. Polcik: Doctoral Thesis, University Erlangen-Nuremberg, Erlangen, Germany, 1998
7. F. Roters, D. Raabe, G. Gottstein: Acta Mater., 2000, vol. 48, pp. 4181–8910.1016/S1359-6454(00)00289-5 ↗
8. E. Nes: Progr. Mater Sci., 1998, vol. 41, pp. 129–9310.1016/S0079-6425(97)00032-7 ↗
9. W. Blum, P. Eisenlohr, F. Breutinger: Metall. Mater. Trans. A, 2002, vol. 33A, pp. 291–30810.1007/s11661-002-0090-9 ↗
10. Y. Bergström, H. Hallen: Mater. Sci. Eng., 1982, vol. 55, pp. 49–6110.1016/0025-5416(82)90083-0 ↗
11. H. Mecking, U.F. Kocks: Acta Metall, 1981, vol. 29, pp. 1865–7510.1016/0001-6160(81)90112-7 ↗
12. J. Friedel: Dislocations, Pergamon, Oxford, United Kingdom, 1964, pp. 239–40
13. J.P. Hirth, J. Lothe: Theory of Dislocations, 2nd ed., Wiley, New York, NY, 1982, pp. 555–62
14. H. Magnusson and R. Sandström: Proc. ASME Pressure Vessels and Piping/CREEP8 Conf., San Antonio, TX, July 22–26, 2007
15. R. Sandström: Acta Mater., 1977, vol. 25, pp. 905–1110.1016/0001-6160(77)90177-8 ↗
16. T.G. Langdon: J. Mater. Sci., 2006, vol. 41, pp. 597–60910.1007/s10853-006-6476-0 ↗
17. X.J. Wu, A.K. Koul: Adv. Perform. Mater., 1997, vol. 4, pp. 409–2010.1023/A:1008648628507 ↗
18. R. Wu, R. Sandström: Mater. Sci. Technol., 1996, vol. 12, pp. 405–1510.1179/026708396790165858 ↗
19. H. Mughrabi: Acta Metall., 1983, vol. 31, pp. 1367–7910.1016/0001-6160(83)90007-X ↗
20. J. Pesicka, R. Kuzel, A. Dronhofer, G. Eggeler: Acta Mater., 2003, vol. 51, pp. 4847–6210.1016/S1359-6454(03)00324-0 ↗
21. G. Eggeler, N. Nilsvang, B. Ilschner: Steel Res., 1987, vol. 58, pp. 97–10310.1002/srin.198701594 ↗
22. K. Sawada, K. Maruyama, Y. Hasegawa, T. Muraki: Key Eng. Mater., 2000, vols. 171–174, pp. 109–1410.4028/www.scientific.net/KEM.171-174.109 ↗
23. L. Korcakova: Doctoral Thesis, Technical University of Denmark, Kgs. Lyngby, 2002
24. G. Hettich, H. Mehrer, K. Maier: Scripta Metall., 1977, vol. 11, pp. 795–80210.1016/0036-9748(77)90078-3 ↗
25. P.J. Ennis, A. Zielinska-Lipiecz, O. Wachter, A. Czyrska-Filemonowicz: Acta Mater., 1997, vol. 45, pp. 4901–0710.1016/S1359-6454(97)00176-6 ↗
26. R. Wu, R. Sandström, F. Seitisleam: J. Eng. Mater. Technol., 2004, vol. 126, pp. 87–9410.1115/1.1631025 ↗
27. K. Sawada, K. Kubo, F. Abe: Mater. Sci. Eng., 2001, vol. A319, pp. 784–8710.1016/S0921-5093(01)00973-X ↗
28. J. Hald: Creep and Fracture in High Temperature Components—Design and Life Assessment Issues, DEStech Publications Inc., Lancaster, PA, 2005, pp. 20–30