Geometry-Induced Spatial Variation of Microstructure Evolution During Selective Electron Beam Melting of Rene-N5
Source abstract
Abstract
High gamma prime (γ′) nickel-based alloys produced by selective electron beam melting are of interest to the turbine industry which requires control of microstructure in relation to loading conditions within complex component geometry. Welding literature predicts cracking and microstructure evolution as a function of alloy composition and process parameters in this class of alloys. In addition, Additive manufacturing causes variations in the above conditions due to the interaction of geometry on processing and heat transfer. The influence of geometry on processing conditions was explored for alloy Rene N5 by characterizing the solidification grain microstructure and solid-state precipitation. A Semi-Analytical Heat Transfer Model was employed to explain the resulting variation in solidification grain morphology that occurred due to the part geometry. The as-built precipitation structure was found to vary as a function of build height and had no correlation to the solidification grain structure or the layer geometry.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Additive Manufacturing Materials and Processes · Additive Manufacturing and 3D Printing Technologies · Welding Techniques and Residual Stresses
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (71)
Show source-provided references
1. R. C. Reed, T. Tao and N. Warnken: Acta Materialia, 2009, Vol. 57, pp. 5898-5913.10.1016/j.actamat.2009.08.018 ↗
2. . T.M. Pollock, S. Tin: J. Propuls. Power. 2006, Vol. 22, pp. 361–374.10.2514/1.18239 ↗
3. C.T. Sims, N.S. Stoloff, and W.C. Hagel: in: Superalloys II, 1987, p. 615.
4. . F. Klocke, A. Klink, D. Veselovac, D.K. Aspinwall, S.L. Soo, M. Schmidt, J. Schilp, G. Levy, J.P. Kruth: CIRP Ann. Manuf. Technol. 2014, Vol. 63, pp. 703–726.10.1016/j.cirp.2014.05.004 ↗
5. K. L. Kirsch and K. A. Thole: J. Turbomach. 2017, 139, 061001.10.1115/1.4035212 ↗
6. C. K. Stimpson, J. C. Snyder, K. A. Thole, D. Mongillo: J. Turbomachinery, 2017, vol. 139, p. 011007.10.1115/1.4034555 ↗
7. R. S. Bunker: J. Heat Transfer, 2005, Vol. 127, pp. 441-453.10.1115/1.1860562 ↗
8. . W. Sames, F. A. List, S. Pannala, R. R. Dehoff and S. S. Babu: International Materials Reviews, 2016, Vol. 61, pp. 315-360.10.1080/09506608.2015.1116649 ↗
9. . W. Sames, K. Unocic, R. R. Dehoff, T. Lolla and S. S. Babu: Journal of Materials Research, 2014, Vol. 29, pp. 1920-1930.10.1557/jmr.2014.140 ↗
10. P. S. Wei: J. Heat Transf., 2011, vol. 133, p. 031005.10.1115/1.4002445 ↗
11. J.C. Lippold, S.D. Kaiser and J.N. DuPont: Wiley, 2009, ISBN: 978-0-470-08714-5.
12. . D. Dye, O. Hunziker and R. C. Reed: Acta Materialia, 2001, Vol. 49, pp. 683-697.10.1016/S1359-6454(00)00361-X ↗
13. . M. M. Attallah, R. Jennings, X. W. Wang, L. N. Carter: MRS Bulletin, 2016, Vol. 41, pp. 758-764.10.1557/mrs.2016.211 ↗
14. . D. Clark, M. R. Bache and M. T. Whittaker: Journal of Materials Processing Technology, 2008, Vol. 203, pp. 439-448.10.1016/j.jmatprotec.2007.10.051 ↗
15. . M. Seifi, A. Salem, D. Satko, J. Shaffer and J. J. Lewandowski: International Journal of Fatigue, 2017, Vol. 94, pp. 263-287.10.1016/j.ijfatigue.2016.06.001 ↗
16. N. Hrabe, T. Gnaupel-Berold, and T. Quinn: International Journal of Fatigue, Vol. 94, 2017, pp. 202-210.10.1016/j.ijfatigue.2016.04.022 ↗
17. . P. Li, D. H. Warner, A. Fatemi and N. Phan: International Journal of Fatigue, 2016, Vol. 85, pp. 130-143.10.1016/j.ijfatigue.2015.12.003 ↗
18. . W. Sames, K. Unocic, G. Helmreich; S. S. Babu; R. Dehoff; F. Medina: Additive manufacturing, 2016, Vol. 13, pp. 156-165.10.1016/j.addma.2016.09.001 ↗
19. . S. A. David, S. S. Babu and J. M. Vitek: JOM-J MIN MET MAT, 2003, Vol. 55, pp. 14-20.10.1007/s11837-003-0134-7 ↗
20. . S. S. Babu: International Materials Reviews, 2009, Vol. 54, pp. 333-367.10.1179/095066009X12506720908654 ↗
21. . M. Ramsperger, R. F. Singer and C. Körner: Metall. Mater. Trans. A., 2016, Vol. 47A, pp. 1469-1480.10.1007/s11661-015-3300-y ↗
22. A. Bauerei, T. Scharowsky and C. Körner: J. Mater. Process. Technol., 2014, Vol. 214, pp. 2522-2528.10.1016/j.jmatprotec.2014.05.002 ↗
23. . Park, J. -W., Vitek, J. M., Babu, S. S., and David, S. A.: Science and Technology of Welding and Joining, 2004, 9, 472 – 482.10.1179/136217104225021841 ↗
24. . O. A. Ojo, N. L. Richards and M. C. Chaturvedi: Scripta Materialia, 2004, Vol. 50, pp. 641-646.10.1016/j.scriptamat.2003.11.025 ↗
25. . M. Montazeri, F. M. Ghaini and O. A. Ojo: Welding Journal, 2013, Vol. 92, pp. 258S-264S.
26. . M. B. Henderson, D. Arrell, R. Larson, M. Heobel and G. Merchant: Science and Technology of Welding and Joining, 2004, Vol. 9, pp. 13-21.10.1179/136217104225017099 ↗
27. . J. E. Franklin and W. F. Savage: Welding Journal, 1974, Vol. 53, pp. 380s-387s.
28. . C. Körner, H. Helmer, A. Bauereiß, R.F. Singer: MATEC Web Conf. 14, 2014, pp. 8001.10.1051/matecconf/20141408001 ↗
29. . H. Helmer, A. Bauereiß, R.F. Singer, C. Körner: Mater. Sci. Eng. A., 2016, Vol. 668, pp. 180–187.10.1016/j.msea.2016.05.046 ↗
30. . A. Rai, H. Helmer, C. Körner: Additive Manufacturing, 2017, Vol. 13, pp. 124-134.10.1016/j.addma.2016.10.007 ↗
31. . R.R. Dehoff, M.M. Kirka, F. A. List III, K. a. Unocic, W.J. Sames: Materials Science and Technology, 2015, Vol. 31, pp. 939-944.10.1179/1743284714Y.0000000697 ↗
32. . R. R. Dehoff, W. J. Sames, M. K. Kirka, H. Bilheux, A. S. Tremsin and S. S. Babu: Materials Science and Technology, 2015, Vol. 31, pp. 931-938.10.1179/1743284714Y.0000000734 ↗
33. . N. Raghavan, S. S. Babu. R. R. Dehoff, S. Pannala, S. Simunovic, M. K. Kirka, J. Turner and N. Carlson: Acta Materialia, 2016, Vol. 112, pp. 303-314.10.1016/j.actamat.2016.03.063 ↗
34. . J. Raplee, A. Plotkowski, M. Kirka, R. Dinwiddie, A. Okello, R. R. Dehoff and S. S. Babu: Sci. Rep. 2017, Vol. 7, 43554.10.1038/srep43554 ↗
35. . M. M. Kirka, Y. Lee, D. A. Greeley, A. Okello, M. J. Goin, and R. R. Dehoff: JOM, 2017, Vol. 69, pp. 523-531.10.1007/s11837-017-2264-3 ↗
36. M. M. Kirka, F. Medina, R. R. Dehoff and A. Okello: Mater. Sci. Eng. A. 2017, Vol. 680A, pp. 338-346.10.1016/j.msea.2016.10.069 ↗
37. . J.D. Hunt, P. Road: Mater. Sci. Eng. 1984, Vol. 65 pp. 75–83.10.1016/0025-5416(84)90201-5 ↗
38. . S.C. Flood, J.D. Hunt: J. Cryst. Growth. 1987, Vol. 82 pp. 552–560.10.1016/0022-0248(87)90347-2 ↗
39. . R. Trivedi and W. Kurz: International Materials Reviews, 1994, Vol. 39, pp. 49-74.10.1179/imr.1994.39.2.49 ↗
40. . S. A. David and J.M. Vitek: Int. Mater. Rev. 1989, Vol. 34, pp. 213–245.10.1179/imr.1989.34.1.213 ↗
41. . M. Gäumann, C. Bezencon, P. Canalis, and W. Kurz: Acta Materialia, 2001, Vol. 49, pp. 1051-1062.10.1016/S1359-6454(00)00367-0 ↗
42. . M. Gäumann, R. Trivedi and W. Kurz: Materials Science and Engineering, 1997, Vol. A226-228, pp. 763-769.10.1016/S0921-5093(97)80081-0 ↗
43. . M. Gäumann, C. Bezençon, P. Canalis, W. Kurz: Acta Mater. 2001, Vol. 49, pp. 1051–1062.10.1016/S1359-6454(00)00367-0 ↗
44. L. Nastac, J.J. Valencia, M.L. Tims, F.R. Dax: 2001, pp. 103–112.10.7449/2001/Superalloys_2001_103_112 ↗
45. . P. Schempp, C.E. Cross, A. Pittner, M. Rethmeier: Weld. J. 2014, Vol. 93, pp. 69s–77s.
46. . L.E. Murr, E. Martinez, S.M. Gaytan, D.A. Ramirez: Metallogr. Microstruct. Anal. 2012, Vol. 1 pp. 45–58.10.1007/s13632-011-0002-8 ↗
47. L.E. Murr, E. Martinez, S.M. Gaytan, D.A. Ramirez, B.I. MacHado, P.W. Shindo, J.L. Martinez, F. Medina, J. Wooten, D. Ciscel, U. Ackelid, R.B. Wicker: Metall. Mater. Trans. A, 2011, Vol. 42, pp. 3491–3508.10.1007/s11661-011-0748-2 ↗
48. . L.E. Murr, E. Martinez, X.M. Pan, S.M. Gaytan, J.A. Castro, C. A. Terrazas, F. Medina, R.B. Wicker, D.H. Abbott: Acta Mater. 2013, Vol. 61, pp. 4289–4296.10.1016/j.actamat.2013.04.002 ↗
49. . T. M. Mower and M. J. Lomg: Materials Science and Engineering A., 2016, Vol. 651, pp. 198-213.10.1016/j.msea.2015.10.068 ↗
50. S. L. Hu, H. P.T. Yang, Y. P. Ning, N. Liu, D. H. Stjohn and M. Qian: Metall. Mater. Trans. A., 2015, Vol. 46A, pp. 3824-3834.
51. . S. Tammas-Williams, P. J. Withers, I. Todd and P. B. Prangnell: Mater. Trans. A., 2016, Vol. 47A, pp. 1939-1946.10.1007/s11661-016-3429-3 ↗
52. . J. Gockel, J. Fox, J. Beuth and R. Hafley: Materials Science and Technology, 2015, Vol. 31, pp. 912-916.10.1179/1743284714Y.0000000704 ↗
53. T. Mukherjee, J. S. Zuback, A. De and T. Debroy: Scientific Reports, 2016, Vol. 6, 19717.10.1038/srep19717 ↗
54. . F. A. List, R.R. Dehoff, L.E. Lowe, W.J. Sames: Mater. Sci. Eng. A. 2014, Vol. 615, pp. 191–197.10.1016/j.msea.2014.07.051 ↗
55. . N. Béraud, F. Vignat, F. Villeneuve, R. Dendievel: Addit. Manuf. 2016, Vol. 14, pp. 1–6.
56. R.B. Dinwiddie, R.R. Dehoff, P.D. Lyod, L.E. Low, and J.B. Ulrich: Proc. Vol. 8705, Thermal Infrared Applications XXXV, 2013, https://doi.org/10.1117/12.2018412.10.1117/12.2018412 ↗
57. . M. Ramsperger, R. F. Singer and C. Körner: Metall. Mater. Trans. A., 2016, Vol. 47A, pp. 1469-1480.10.1007/s11661-015-3300-y ↗
58. . A.A. Antonysamy, J. Meyer, P.B. Prangnell: Mater. Charact. 2013, Vol. 84, pp. 153–168.10.1016/j.matchar.2013.07.012 ↗
59. . Y. Kok, X. Tan, S.B. Tor, C.K. Chua: Virtual Phys. Prototyp. 2015, Vol. 10, pp. 13–21.10.1080/17452759.2015.1008643 ↗
60. . Y.H. Kok, X.P. Tan, N.H. Loh, S.B. Tor, C.K. Chua: Virtual Phys. Prototyp., 2016, Vol. 11, pp. 183-191.10.1080/17452759.2016.1210483 ↗
61. A. Plotkowski, M.M. Kirka, and S.S. Babu: Addit. Manuf., 2017, vol. 18, pp. 256–268.10.1016/j.addma.2017.10.017 ↗
62. . R. Komanduri, Z.B. Hou: Metall. Mater. Trans. B. 2000, Vol. 31, pp. 1353–1370.10.1007/s11663-000-0022-2 ↗
63. . R. Komanduri, Z.B. Hou: Int. J. Heat Mass Transf., 2001, Vol. 44, pp. 2845–2862.10.1016/S0017-9310(00)00316-1 ↗
64. H.S. Carslow, J.C. Jaeger, J.E. Morral: Conduction of Heat in Solids, Second Edition, 1986.10.1115/1.3225900 ↗
65. . M. Seita, M. M. Nimerrfroh, and M. J. Demkowicz: Acta Materialia, 2017,. Vol. 123, pp. 70-81.10.1016/j.actamat.2016.10.021 ↗
66. . J. C. Villafuerte, H. W. Kerr and S. A. David: Materials Science and Engineering A, 1995, Vol. A194, pp. 187-191.10.1016/0921-5093(94)09656-2 ↗
67. S. S. Babu, Kelly S. M., Murugananth, M., and Martukanitz, R. P.: Surf. Coat. Technol., Vol. 200 (8), 2006, 2663-2671.10.1016/j.surfcoat.2005.02.160 ↗
68. Y. S. Lee, M. Nordin, S. S. Babu and D. F. Farson: Welding Journal, 2014, Vol. 93, pp. 292s-300s.
69. Y. S. Lee, M. Nordin, S. S. Babu and D. F. Farson: Metallurgical and Materials Transactions B, 2014, Vol. 45, pp. 1520-1529.10.1007/s11663-014-0054-7 ↗
70. N. Saunders, U. K. Z. Guo, X. Li, A. P. Miodownik, and J.-Ph. Schille: JOM, 2003, Vol. 55, pp. 60-65.10.1007/s11837-003-0013-2 ↗
71. S.S. Babu, S.A. David, J.W. Park, and J.M. Vitek: in International Conference on Microstructure and Performance of Joints in High-Temperature Alloys, London 2002, Science and Technology of Welding and Joining, vol. 9, 2004, pp. 1–12.10.1179/136217104225017080 ↗