Evolution of Fe Bearing Intermetallics During DC Casting and Homogenization of an Al-Mg-Si Al Alloy
Source abstract
Abstract
Abstract The evolution of iron (Fe) bearing intermetallics (Fe-IMCs) during direct chill casting and homogenization of a grain-refined 6063 aluminum-magnesium-silicon (Al-Mg-Si) alloy has been studied. The as-cast and homogenized microstructure contained Fe-IMCs at the grain boundaries and within Al grains. The primary α-Al grain size, α-Al dendritic arm spacing, IMC particle size, and IMC three-dimensional (3D) inter-connectivity increased from the edge to the center of the as-cast billet; both α c-AlFeSi and β-AlFeSi Fe-IMCs were identified, and overall α c-AlFeSi was predominant. For the first time in industrial billets, the different Fe-rich IMCs have been characterized into types based on their 3D chemistry and morphology. Additionally, the role of β-AlFeSi in nucleating Mg2Si particles has been identified. After homogenization, α c-AlFeSi predominated across the entire billet cross section, with marked changes in the 3D morphology and strong reductions in inter-connectivity, both supporting a recovery in alloy ductility.
Source: crossref · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Aluminum Alloys Composites Properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (41)
Show source-provided references
1. O. Reiso: Mater. Forum, 2004, vol. 28, pp. 32-46.
2. C.M. Allen, K.A.Q. O’Reilly, B. Cantor and P.V. Evans: Prog. Mater. Sci., 1998, vol. 43, pp.89-170.10.1016/S0079-6425(98)00003-6 ↗
3. H. Zhu, M.J. Couper and A.K. Dahle: JOM, 2011, vol. 63, pp. 66-71.10.1007/s11837-011-0183-2 ↗
4. L. Sweet, S.M. Zhu, S.X. Gao, J.A. Taylor and M.A. Easton: Metall. Mat. Trans. A,2011, vol. 42, pp. 1737-1749.10.1007/s11661-010-0595-6 ↗
5. S. Onurlu and A. Tekin: J. Mater. Sci., 1994, vol. 23, pp. 1652-1655.10.1007/BF00368940 ↗
6. S. Zajac, B. B. Hutchinson, A. A. Johansson and L.Q. L.-O. Gullman: Mater. Sci. Tech., 1994, vol. 10, pp. 323-333.10.1179/mst.1994.10.4.323 ↗
7. M.H. Mulazimoglu, A. Zaluska, J.E. Gruzleski and F. Paray: Metall. Mat. Trans. A, 1996, vol. 27, pp. 929-936.10.1007/BF02649760 ↗
8. G. Sha, K.A.Q. O’Reilly, B. Cantor, J. Worth and R. Hamerton: Mater. Sci. Eng. A, 2001, Vol. 304-306, pp. 612-616.10.1016/S0921-5093(00)01545-8 ↗
9. S. Kumar, P.S. Grant and K.A.Q. O’Reilly: Trans. Indian Inst. Met., 2012, vol. 65, pp. 553-557.10.1007/s12666-012-0221-y ↗
10. H. Tanihata, T. Sugawara, K. Matsuda and S. Ikeno: J. Mater. Sci., 1999, vol. 34, pp. 1205-1210.10.1023/A:1004504805781 ↗
11. N.C.W. Kuijpers, F.J. Vermolen, K. Vuik, and S. Van Der Zwaag: Mater. Trans., 2003, vol. 44, pp. 1448-1456.10.2320/matertrans.44.1448 ↗
12. J. Sarkar, T.R.G. Kutty, D.S. Wilkinson, J.D. Embury and D.J. Lloyd: Mater. Sci. Eng. A, 2004, vol. 369, pp. 258-266.10.1016/j.msea.2003.11.022 ↗
13. Y. Birol: J. Mater. Process. Tech., 2004, vol. 148, pp. 250-258.10.1016/j.jmatprotec.2004.01.056 ↗
14. K.B.S. Couto, S.R. Claves, W.H. Van Geertruyden, W.Z. Misiolek and M. Goncalves: Mater. Sci. Tech., 2005, vol. 21, pp. 263-268.10.1179/174328405X18584 ↗
15. S. Kumar, N.H. Babu, G.M. Scamans, Z. Fan, and K.A.Q. O’Reilly: Metall. Mater. Trans. A, 2014, vol. 45, pp. 2842–54.10.1007/s11661-014-2229-x ↗
16. J. Asensio-Lozano, B. Suárez-Peña and G.F.V. Voort: Mater., 2014, vol. 7, pp. 4224-4242.10.3390/ma7064224 ↗
17. G.I. Eskin and I.N. Friedlyander: Met. Sci. Heat Treat., 1962, vol. 4, pp. 154-157.10.1007/BF00816371 ↗
18. S. Kumar, N.H. Babu, G.M. Scamans, and Z. Fan, Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3141–49.10.1007/s11661-011-0722-z ↗
19. J.B. Patel, H.T. Li, M.X. Xia, S. Jones, S. Kumar, K. O’Reilly, and Z. Fan: Mater. Sci. Forum, 2014, pp. 149–54.10.4028/www.scientific.net/MSF.794-796.149 ↗
20. E. Liotti, A. Lui, R. Vincent, S. Kumar, Z. Guo, T. Connolley, I.P. Dolbnya, M. Hart, L. Arnberg, R.H. Mathiesen and P.S. Grant: Acta. Mater., 2014, vol. 70, pp. 228-239.10.1016/j.actamat.2014.02.024 ↗
21. C. Hsu, K.A.Q. O’Reilly, B. Cantor, and P.V. Evans: Procedings of the 4th Decennial International Conference on Solidification Processing. (1997).
22. A. Verma, S. Kumar, P.S. Grant and K.A.Q. O’Reilly: J. Alloys Compd., 2013, vol. 555, pp. 274-282.10.1016/j.jallcom.2012.12.077 ↗
23. D.G. Eskin, Physical metallurgy of direct chill casting of aluminum alloys, CRC Press/Taylor & Francis, Boca Raton, 2008.10.1201/9781420062823 ↗
24. T. Smith, K. O’Reilly, S. Kumar and I. Stone: Metall. Mat. Trans. A, 2013, vol. 44, pp. 4866-4871.10.1007/s11661-013-1934-1 ↗
25. H. Westengen: Z. Metallkd., 1982, vol. 73, pp. 360-368.
26. D.G. Eskin, J. Zuidema, V.I. Savran and L. Katgerman: Mater. Sci. Eng. A, 2004, vol. 384, pp. 232-244.10.1016/j.msea.2004.05.066 ↗
27. Standard test procedure for aluminum alloy grain refiners, AA TP-1, The Aluminium Association, 1990.
28. G. Sha: Department of Materials, University of Oxford, Oxford, 2001.
29. C. Hsu: Department of Materials, University of Oxford, Oxford, 1999.
30. G. Sha, K.A.Q. O’Reilly, B. Cantor, J.M. Titchmarsh and R.G. Hamerton: Acta. Mater., 2003, vol. 51, pp. 1883-1897.10.1016/S1359-6454(02)00595-5 ↗
31. L.F. Mondolfo: Aluminum Alloys: Structure and Properties, Butterworths, Boston, 1976.10.1016/B978-0-408-70932-3.50008-5 ↗
32. L. Bäckerud, E. Król, and J. Tamminen: Solidification Characteristics of Aluminium Alloys, vol. 1, 1986.
33. C. Hsu, K.A.Q. O’Reilly, B. Cantor and R. Hamerton: Mater. Sci. Eng. A, 2001, vol. 304–306, pp. 119-124.10.1016/S0921-5093(00)01467-2 ↗
34. E.D. Manson-Whitton, I.C. Stone, J.R. Jones, P.S. Grant and B. Cantor: Acta. Mater., 2002, vol. 50, pp. 2517-2535.10.1016/S1359-6454(02)00080-0 ↗
35. C.M. Allen, K.A.Q. O’Reilly, P.V. Evans and B. Cantor: Acta. Mater., 1999, vol. 47, pp. 4387-4403.10.1016/S1359-6454(99)00250-5 ↗
36. J.H. Li, A. Wimmer, G. Dehm and P. Schumacher: Philos. Mag., 2014, vol. 94, pp. 830-846.10.1080/14786435.2013.868943 ↗
37. C. Li, Y.Y. Wu, H. Li and X.F. Liu: Acta. Mater., 2011, vol. 59, pp. 1058-1067.10.1016/j.actamat.2010.10.036 ↗
38. C. Li, Y. Wu, H. Li and X. Liu: J. Alloys Compd., 2009, vol. 477, pp. 212-216.10.1016/j.jallcom.2008.10.061 ↗
39. N.C.W. Kuijpers, W.H. Kool, P.T.G. Koenis, K.E. Nilsen, I. Todd and S van der Zwaag: Mater. Char., 2003, vol. 49, pp. 409-420.10.1016/S1044-5803(03)00036-6 ↗
40. M. Usta, M.E. Glicksman and R.N. Wright: Metall. Mat. Trans. A, 2004, vol. 35, pp. 435-438.10.1007/s11661-004-0354-7 ↗
41. G.V. Voort, B. Suárez-Peña and J. Asensio-Lozano: Microsc. Microanal., 2013, vol. 19, pp. 276-284.10.1017/S143192761300010X ↗