Effect of Starting Microstructure on the Grain Refinement in Cold-Rolled Low-Carbon Steel During Annealing at Two Different Heating Rates
Source abstract
Abstract
Cold-rolled samples of different starting microstructures, namely ferrite–pearlite (F+P) and ferrite–martensite structures, with blocky martensite (F+Mb) and fibrous martensite (F+Mf) morphologies were reheated at two different heating rates (1 and 300 K/s) to sub-critical and inter-critical annealing temperatures [773 K to 1173 K (500 °C to 900 °C)] and immediately water quenched. Grain refinement after annealing of cold-rolled samples depends on the rate of recovery, recrystallization, transformation, and grain growth. Rapid recrystallization during annealing weakened the recrystallization–transformation interaction in F+P sample. Higher rate of ferrite recovery reduced the driving force for recrystallization, which weakened the recrystallization–transformation interaction during annealing of F+Mb sample. As a result, coarser grain structures were obtained after annealing of cold-rolled F+P and F+Mb starting structures. Strong recrystallization–transformation interaction and suppression of grain growth by uniformly distributed carbide particles and austenite islands (after transformation) offered finest ferrite grain size and best combination of strength and ductility in F+Mf sample.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (51)
Show source-provided references
1. R. Song, D. Ponge, D. Raabe, J.G. Speer and D.K. Matlock: Mater. Sci. Eng. A, 2006, vol. 441, pp. 1–17.10.1016/j.msea.2006.08.095 ↗
2. N. Tsuji, R. Ueji, Y. Minamino and Y. Saito: Scripta Mater., 2002, vol. 46, pp. 305–10.10.1016/S1359-6462(01)01243-X ↗
3. H. Azizi-Alizamini, M. Militzer and W. J. Poole: ISIJ Int., 2011, vol. 51, pp. 958–64.10.2355/isijinternational.51.958 ↗
4. K. T. Park, Y. K. Lee and D. H. Shin: ISIJ Int., 2005, vol. 45, pp. 750–55.10.2355/isijinternational.45.750 ↗
5. J. Aldazabal and J. G. Sevillano: Mater. Sci. Eng. A, 2004, vol. 365, pp. 186–90.10.1016/j.msea.2003.09.026 ↗
6. N. Nakada, Y. Arakawa, K. S. Park, S Tsuchiyama and T. S. Takaki: Mater. Sci. Eng. A, 2012, vol. 553, pp. 128–33.10.1016/j.msea.2012.06.001 ↗
7. H. Zakerinia, A. Kermanpur and A. Najafizadeh: Mater. Sci. Eng. A, 2011, vol. 528, pp. 3562–67.10.1016/j.msea.2011.01.067 ↗
8. W. S. Owen: Met. Technol., 1980, vol. 7, pp. 1–13.10.1179/030716980803286649 ↗
9. Y. Son, Y. K. Lee, K. T. Park, C. S. Lee and D. H. Shin: Acta Mater., 2005, vol. 53, pp. 3125–34.10.1016/j.actamat.2005.02.015 ↗
10. R.Z. Valiev, A.V. Korznikov and R.R. Mulyukov: Mater. Sci. Eng. A, 1993, vol. 168, pp. 141–48.10.1016/0921-5093(93)90717-S ↗
11. H. Beladi, G. L. Kelly and P. D. Hodgson: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 450–63.10.1007/s11661-006-9080-7 ↗
12. R.Z. Valiev: Mater. Sci. Eng. A, 1997, vol. 234, pp 59–66.10.1016/S0921-5093(97)00183-4 ↗
13. Y. Saito, H. Utsunomiya, N. Tsuji and T. Sakai: Acta Mater., 1999, vol. 47, pp. 579–83.10.1016/S1359-6454(98)00365-6 ↗
14. Yu. Ivanisenko, W. Lojkowski, R.Z. Valiev and H.J. Fechta: Acta Mater., 2003, vol. 51, pp. 5555–70.10.1016/S1359-6454(03)00419-1 ↗
15. T. Gladman: The Physical Metallurgy of Microalloyed Steels, The Institute of Materials, London, 1997, Book 615, pp. 80–115.
16. R. Kaspar, J.S. Distl and O. Pawelski: Steel Res., 1988, vol. 59, pp. 421–25.10.1002/srin.198801535 ↗
17. P.D. Hodgson, M.R. Hickson and R.K. Gibbs: Scripta Mater., 1999, vol. 40, pp. 1179–84.10.1016/S1359-6462(98)00411-4 ↗
18. Y. Matsumura and H. Yada: ISIJ Int., 1987, vol. 27, pp. 492–98.10.2355/isijinternational1966.27.492 ↗
19. A. Najafi-Zadeh, J.J. Jonas and S. Yue: Metall. Trans. A, 1992, vol. 23A, pp. 2607–17.10.1007/BF02658064 ↗
20. R. Ueji, N. Tsuji, Y. Minamino, Y. Koizumi: Acta Mater., 2002, vol. 50, pp. 4177–89.10.1016/S1359-6454(02)00260-4 ↗
21. X. Zhao, T. F. Jing, Y. W. Gao, G. Y. Qiao, J. F. Zhou, W. Wang: Mater. Sci. Eng. A, 2005, vol. 397, pp. 117–21.10.1016/j.msea.2005.02.007 ↗
22. S. M. Hasan, A. Haldar, D. Chakrabarti: Mater. Sci. Technol., 2012, vol. 28, pp. 823–28.10.1179/1743284711Y.0000000113 ↗
23. C. Lesch, P. Alvarez, W. Bleck and J. Gil Sevillano: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 1882–90.10.1007/s11661-006-9052-y ↗
24. P. Alvarez, C. Lesch, W. Bleck, H. Petitgand, J. Schöttler and J. Gil Sevillano: Mater. Sci. Forum, 2005, vol. 500–501, pp. 771–78.10.4028/www.scientific.net/MSF.500-501.771 ↗
25. V. Andrade-Carozzo and P. J. Jacques: Mater. Sci. Forum, 2007, vol. 539–543, pp. 4649–54.10.4028/www.scientific.net/MSF.539-543.4649 ↗
26. T. Lolla, G. Cola, B. Narayanan, B. Alexandrov and S. S. Babu: Mater. Sci. Technol., 2011, vol. 27, pp. 863–75.10.1179/174328409X433813 ↗
27. V. Massardier, A. Ngansop, D. Fabrègue and J. Merlin: Mater. Sci. Eng. A, 2010, vol. 527, pp. 5654–63.10.1016/j.msea.2010.05.024 ↗
28. A. Karmakar, M. Ghosh and D. Chakrabarti: Mater. Sci. Eng. A, 2012, vol. 564, pp. 389–99.10.1016/j.msea.2012.11.109 ↗
29. A. Chbihi, D. Barbier, L. Germain, A. Hazotte and M. Goune: J Mater Sci., 2014, vol. 49, pp. 3608–21.10.1007/s10853-014-8029-2 ↗
30. C. Zheng and D. Raabe: Acta Mater., 2012, vol. 61, pp. 5504–17.10.1016/j.actamat.2013.05.040 ↗
31. K. Hase, N. Tsuji: Scripta Mater., 2011, vol. 65, pp. 404–07.10.1016/j.scriptamat.2011.05.018 ↗
32. A.V. Massardier, M. Goune, D. Fabregue, A. Selouane, T. Douillard and O. Bouaziz: J Mater Sci., 2014, vol. 49, pp. 7782–96.10.1007/s10853-014-8489-4 ↗
33. J. Huang, W.J. Poole, and M. Militzer: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3363–75.10.1007/s11661-004-0173-x ↗
34. J. Han and Y. K. Lee: Acta Mater., 2014, vol. 67, pp. 354–61.10.1016/j.actamat.2013.12.038 ↗
35. D. Chakrabarti, C. Davis and M. Strangwood: Mater. Charact., 2007, vol. 58, pp. 423–38.10.1016/j.matchar.2006.06.014 ↗
36. N. Peranio, Y.J. Li, F. Roters and D. Raabe: Mater. Sci. Eng. A, 2010, vol. 527, pp. 4161–68.10.1016/j.msea.2010.03.028 ↗
37. A.R. Marder: Metall. Trans. A, 1982, vol. 13A, pp. 85–92.10.1007/BF02642418 ↗
38. M. Mazinani and W.J. Poole: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 328–39.10.1007/s11661-006-9023-3 ↗
39. R. R. Mohanty, O. A. Girina and N. M. Fonstein: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 3680–90.10.1007/s11661-011-0753-5 ↗
40. H. Azizi-Alizamini, M. Militzer and W. J. Poole: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1544–57.10.1007/s11661-010-0551-5 ↗
41. K. Hono, M. Ohnuma, M. Murayama, S. Nishida, A. Yoshie, T. Takahashi: Scripta Mater., 2001, vol. 44, pp. 977–83.10.1016/S1359-6462(00)00690-4 ↗
42. Z. Q. Lv, S. H. Sun, Z. H. Wang, M. G. Qv, P. Jiang, W. T. Fu: Mater. Sci. Eng. A, 2008, vol. 489, pp. 107–12.10.1016/j.msea.2007.12.005 ↗
43. T. Senuma, H. Yada, R. Shimizu, J. Harase: Acta Mater., 1990, vol. 38, pp. 2673–81.10.1016/0956-7151(90)90281-K ↗
44. K. Toda, H. Gondoh, H. Takeuchi, M. Abe, N. Uehara, K. Komiya: Trans. ISIJ, 1975, vol. 15, pp. 305–12.10.2355/isijinternational1966.15.305 ↗
45. K. Ushioda, W. B. Hutchinson, J. Agren, U. Vonschlippenbach: Mater. Sci. Technol., 1986, vol. 2, pp. 807–15.10.1179/mst.1986.2.8.807 ↗
46. I. L. Dillamore, C. J. E. Smith, T. W. Watson: Met. Sci. J., 1967, vol. 1, pp. 49–54.10.1179/msc.1967.1.1.49 ↗
47. R. K. Ray, J. J. Jonas, R. E. Hook: Int. Mater. Rev., 1994, vol. 39, pp. 129–72.10.1179/imr.1994.39.4.129 ↗
48. X. L. Cai, A.J. Garratt-Reed and W. S. Owen: Metall. Mater. Trans. A, 1985, vol. 16A, pp. 543–57.10.1007/BF02814228 ↗
49. T. Ogawa, N. Muruyama, N. Sugiura, Y. Yeshinaga: ISIJ Int., 2010, vol. 50, pp. 469–75.10.2355/isijinternational.50.469 ↗
50. G.R. Purdy, D. H. Weichert and J. S. Kirkaldy: Trans. TMS-AIME, 1964, vol. 230, pp. 1025–34.
51. J. Han, Y. K. Lee: Acta Mater., 2014, vol. 67, pp. 354–61.10.1016/j.actamat.2013.12.038 ↗