journal article·2009-08

Some Effects of Particle Size on the Sintering of Titanium and a Master Sintering Curve Model

I.M. Robertson, G.B. Schaffer

Publisher page

Abstract

The press-and-sinter method of producing net shapes was applied to titanium alloys. The quantitative effects of the particle size of titanium and Ti-6Al-4V powders on the green and sintered densities were examined. Most powders were pressed at 100 to 800 MPa and sintered under vacuum at 1100 °C, 1200 °C, or 1300 °C for 2 hours. The green density was higher for coarser powders and for powders with a wider size distribution. The sintered density was higher for finer powders and for powders with a wider size distribution. The densification parameter was little affected by the compaction pressure but increased as the particle size was reduced. An empirical model of densification based on the master sintering curve approach was developed, with the activation energy for densification of titanium found to be approximately 160 kJ/mol.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced materials and composites · Powder Metallurgy Techniques and Materials · Injection Molding Process and Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (39)

Show source-provided references
1. M.F. Ashby: Acta Metall., 1974, vol. 22, pp. 275–89.10.1016/0001-6160(74)90167-9 ↗
2. R.M. German: Sintering Theory and Practice. Wiley, New York, NY.
3. R.M. German: Powder Metallurgy and Particulate Materials Processing, MPIF, Princeton, NJ, 2005.
4. F.B. Swinkels and M.F. Ashby: Acta Metall., 1981, vol. 29, pp. 259–81.10.1016/0001-6160(81)90154-1 ↗
5. F. Thummler and R. Oberacker: Introduction to Powder Metallurgy, The Institute of Materials, Minerals and Mining, London, 1993.
6. J.R. Groza: Nanostruct. Mater., 1999, vol. 12, pp. 987–92.10.1016/S0965-9773(99)00284-6 ↗
7. B.B. Panigrahi, M.M. Godkhindi, K. Das, P.G. Mukunda, V.V. Dabhade, and P. Ramakrishnan: J. Mater. Res., 2005, vol. 20, pp. 827–36.10.1557/JMR.2005.0116 ↗
8. V. Bhosle, E.G. Baburaj, M. Miranova, and K. Salama: Metall. Mater. Trans. A, 2003, vol. 34A, pp. 2793–99.10.1007/s11661-003-0180-3 ↗
9. V.G. Khromov: Powder Metall. Met. Ceram., 1979, vol. 18, pp. 16–19.10.1007/BF00791884 ↗
10. B. Wu and F. Guo: Rare Met. Mater. Eng., 1990, vol. 2, pp. 34–36.
11. B.S. Becker and J.D. Bolton: in Advances in PM and Particulate Materials (Washington), MPIF, Princeton, NJ, 1996, pp. 14.119–14.132.
12. I.-H. Oh, H. Segawa, N. Nomura, and S. Hanada: Mater. Trans., 2003, vol. 44, pp. 657–60.10.2320/matertrans.44.657 ↗
13. M. Thieme, K.P. Wieters, F. Bergner, D. Scharnweber, H. Worch, J. Ndop, T.J. Kim, and W. Grill: J. Mater. Sci.-Mater. Med., 2001, vol. 12, pp. 225–31.10.1023/A:1008958914818 ↗
14. Y. Li, X.M. Chou, and L. Yu: Powder Metall., 2006, vol. 49, pp. 236–39.10.1179/174329006X95338 ↗
15. K. Kato: J. Jpn. Soc. Powder P.M., 1999, vol. 46, pp. 865–89.
16. H. Kyogoku, S. Komatsu, T. Isao, and T. Takuo: J. Jpn. Soc. Powder P.M., 1995, vol. 42, pp. 1052–56.
17. E. Nyberg, M. Miller, K. Simmons, and K.S. Weil: Mater. Sci. Eng., C, 2005, vol. 25, pp. 336–42.10.1016/j.msec.2005.04.006 ↗
18. O.M. Ivasishin, D.G. Savvakin, I.S. Bielov, V.S. Moxson, V.A. Duz, R. Davies, and C. Lavender: Mater. Sci. Technol., 2005, vol. 21, pp. 151–58.
19. R. Sundaresan, A.C. Raghuram, R.M. Mallya, and K.I. Vasu: Powder Metall., 1996, vol. 39, pp. 138–42.10.1179/pom.1996.39.2.138 ↗
20. V.M. Anokhin, O.M. Ivasishin, and A.N. Petrunko: Mater. Sci. Eng., A, 1998, vol. 243, pp. 269–72.10.1016/S0921-5093(97)00812-5 ↗
21. O.M. Ivasishin, V.M. Anokhin, A.N. Demidik, and D.G. Sawakin: Key Eng. Mater., 2000, vol. 188, pp. 55–62.10.4028/www.scientific.net/KEM.188.55 ↗
22. S.J. Gerdemann and D.E. Alman: in Advances in Powder Metallurgy and Particulate Materials (Toronto), MPIF, Princeton, NJ, pp. 12.41–12.52.
23. M. Kim, P.C. Chen, and K. Vedula: in Modern Developments in Powder Metallurgy—Ferrous and Non-Ferrous Materials (Toronto), MPIF, Princeton, NJ, 1985, pp. 547–62.
24. O.M. Ivasishin, D.G. Savvakin, V.S. Moxson, K.A. Bondareva, and F.H. Froes: Mater. Technol., 2002, vol. 17, pp. 20–25.10.1080/10667857.2002.11752959 ↗
25. K. Majima, K. Kitagaki, M. Yamamoto, and K. Shoji: J. Jpn. Soc. Powder P.M., 1986, vol. 33, pp. 145–52.
26. C.R.F. Azevedo, D. Rodrigues, and F. Beneduce Neto: J. Alloys Compd., 2003, vol. 353, pp. 217–27.10.1016/S0925-8388(02)01297-5 ↗
27. G. Korb and P. Schretter: in Horizons of Powder Metallurgy (Dusseldorf), Verlag Schmid, Freiburg, Federal Republic of Germany, 1986, pp. 939–42.
28. M.C.C. Ueta, C.A. Fracote, V.A.R. Henriques, M.L.A. Graga, and C.A.A. Cairo: Mater. Sci. Forum, 2005, vols. 498–499, pp. 211–16.10.4028/www.scientific.net/MSF.498-499.211 ↗
29. H.-H. Su and D.L. Johnson: J. Am. Ceram. Soc., 1996, vol. 79, pp. 32111–32117.
30. C. Herring: J. Appl. Phys., 1950, vol. 21, pp. 301–03.10.1063/1.1699658 ↗
31. D.C. Blaine, J.D. Gurosik, S.J. Park, D.F. Heaney, and R.M. German: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 715–20.10.1007/s11661-006-0043-9 ↗
32. R.M. German, J. Ma, X. Wang, and E. Olevsky: Powder Metall., 2006, vol. 49, pp. 19–27.10.1179/174329006X94690 ↗
33. D.C. Blaine, S.J. Park, P. Suri, and R.M. German: Metall. Mater. Trans. A, 2006, vol. 37A, pp. 2827–36.10.1007/BF02586115 ↗
34. S.J. Park, S.H. Chung, J.M. Martín, J.L. Johnson, and R.M. German: Metall. Mater. Trans. A, 2008, vol. 39A, pp. 2941–48.10.1007/s11661-008-9654-7 ↗
35. Smithells Metals Reference Book, 8th ed., W.F. Gale and T.C. Totemeier, eds., Elsevier, Amsterdam, 2004, pp. 13.10–13.14.
36. B.B. Panigrahi, M.M. Godkhindi, K. Das, P.G. Mukunda, and P. Ramakrishnan: Mater. Sci. Eng., A, 2005, vol. 396, pp. 255–62.10.1016/j.msea.2005.01.016 ↗
37. H.Y. Wu and P.G. Wahlbeck: High Temp. Sci., 1971, vol. 3, pp. 469–77.
38. A. Salam and C. Hammond: J. Mater. Sci. Lett., 2000, vol. 19, pp. 2155–56.10.1023/A:1026747431129 ↗
39. M.L. Meier and A.K. Mukherjee: Scripta Metall. Mater., 1991, vol. 25, pp. 1471–76.10.1016/0956-716X(91)90435-4 ↗