The Transformation of Carbides during Austenization and Its Effect on the Wear Resistance of High Speed Steel Rolls
Source abstract
Abstract
The transformation of carbides with austenization time of a high speed steel (HSS) roll material, manufactured by a centrifugal casting method, has been studied. The correlation between wear resistance and the type, morphology, volume fraction, and distribution of the carbides has also been investigated. Microstructural observations, X-ray diffraction (XRD) analysis, hardness measurements, and energy dispersive spectroscopy (EDS) have been used to characterize the carbides. The type and volume fraction of carbides were found to change with austenizing time. During austenization, the transformation of the M3C carbides can be postulated as M3C + γ-Fe → M2C, with much finer nodular and rodlike MC carbides also forming through a solid-state transformation. The M2C carbide decomposes as M2C + γ-Fe → MC + M7C3 + M6C. The decomposed carbide substantially maintains a platelike shape until the end of decomposition. The most important finding of this study is that austenization results in changes in the type, morphology, volume fraction, and distribution of carbides and that it can be controlled to produced a homogeneous distribution of hard carbides, resulting in an improvement in the wear resistance of HSS rolls. This finding may be of great use for the industrial production of HSS rolls.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Advanced materials and composites · Metal and Thin Film Mechanics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (18)
Show source-provided references
1. M. Andersson, R. Finnstrom, T. Nylen: Ironmaking Steelmaking, 2004, vol. 31, pp. 383–8810.1179/030192304225018208 ↗
2. J.C. Werquin, J.C. Cailaud In: Corbett R.B. (ed.), Roll for the Metal Working Industries. Iron and Steel Society, Warrendale, PA, 1990, pp. 55–77.
3. W.H. Betts, H.L. Baxter In: Corbett R.B. (ed.), Roll for the Metal Working Industries. Iron and Steel Society, Warrendale, PA, 1990, pp. 23–30
4. S. Lee, D.H. Kim, J.H. Ryu, K. Shin: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 2595–260810.1007/s11661-997-0017-6 ↗
5. W.F. Smith: Structure and Properties of Engineering Alloys, McGraw-Hill, New York, NY, 1981, chs. 1 and 9
6. Y. Sono, T. Hattori, M. Haga: ISIJ Int., 1992, vol. 32, pp. 1194–1201.10.2355/isijinternational.32.1194 ↗
7. T. Kudo, S. Kawashima, R. Kurahashi: ISIJ Int., 1992, vol. 32, pp. 1190–9310.2355/isijinternational.32.1190 ↗
8. K. Goto, Y. Matsuda, K. Sakamoto, Y. Sugimoto: ISIJ Int., 1992, vol. 32, pp. 1184–8910.2355/isijinternational.32.1184 ↗
9. J.W. Shingly, C.R Mischke: Mechanical Engineering Design, McGraw-Hill, New York, NY, 1989, p. 71
10. K.C. Hwang, S. Lee, H.C. Lee: Mater. Sci. Eng. A, 1998, vol. 254, pp. 282–9510.1016/S0921-5093(98)00626-1 ↗
11. W.C. Leslie: The Physical Metallurgy of Steels, McGraw-Hill, New York, NY, 1981, ch. 8
12. M. Hashimoto, O. Kubo, Y. Matsubara: ISIJ Int., 2004, vol. 44, pp. 372–8010.2355/isijinternational.44.372 ↗
13. H.J. Goldschmit: Interstitial Alloys, Butterworth & Co., London, 1967, p. 9110.1007/978-1-4899-5880-8 ↗
14. Y. Matsubara, T.N. Sasaguri, Y. Honda, H. Wu, M. Hashimoto: Imono (J. Jpn. Foundrymen’s Soc.), 1994, vol. 66, p. 815
15. K. Yamamoto, T. Kogin, T. Harakawa, N. Murai, M. Kuwano, K. Ogi: J. Jpn. Foundrymen’s Soc., 2000, vol. 72, p. 90
16. J.H. Lee, J.C. OH, J.W. Park, H.C. Lee, S. Lee: ISIJ Int., 2001 vol. 44, pp. 859–6510.2355/isijinternational.41.859 ↗
17. P. Thonus, J.C. Herman, J.P. Boeyer, M. Sinnaeve, A. Chailier, D. Liquet, R. Marquet: 38th MWSP Conf. Proc., vol. 34 ISS, Warrendale, PA, 1997, p. 43
18. S. Suresh: Fatigue of Materials, 2nd ed., Cambridge University Press, New York, NY, 1998, ch. 510.1017/CBO9780511806575 ↗