Effect of grain-boundary characteristics on castability of nickel-base superalloys
Source abstract
Abstract
Hot tearing susceptibility of two Ni-base superalloys, IN792 and CM247, during directional solidification was studied. Effects of grain-boundary (GB) misorientation on castability were examined by casting single-crystal (SC) and bicrystal (BC) specimens. Crack-free specimens were obtained in castings with GB misorientation angles of less than ∼12 deg. Severe cracking occurred if the GB angle was greater than 25 deg. Secondary dendrite arm length right at the GB was found to be larger than in the GB vicinity and to increase with GB misorientation. The amount of eutectic melt and foreign element segregation is also larger at the GB. The greater susceptibility of the GB to hot tearing is almost certainly caused by reduced strength compared to the grain interior. The reduced strength is either due to reduced secondary arm bridging because of geometrical constraints or due to the existence of a thin liquid film as a result of stronger segregation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. J. Rösler, M. Konter, and C. Tönnes: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, and T.M. Pollock, eds., TMS, Warrendale, PA, 1996, pp. 515–22.
2. K. Heck, J.R. Blackford, and R.F. Singer: Mater. Sci. Technol., 1999, vol. 15, pp. 213–20.10.1179/026708399101505617 ↗
3. G.K. Sigworth: AFS Trans., 1996, vol. 155, pp. 1053–62.
4. J. Campbell: Castings, Butterworth-Heinemann Ltd., London, 1991, pp. 219–29.
5. T.W. Clyne and G.J. Davies: Br. Foundrymen, 1981, vol. 74, pp. 65–73.
6. M.G. Chu and D.A. Granger: in Solidification Processing 1997, J. Beech and H. Jones, eds., The University of Sheffield, Sheffield, 1997, pp. 198–202.
7. Y.F. Guven and J.D. Hunt: Cast Met., 1988, vol. 1, pp. 104–11.10.1080/09534962.1988.11818955 ↗
8. I. Farup, J.M. Drezet, and M. Rappaz: Acta Mater., 2001, vol. 49, pp. 1261–69.10.1016/S1359-6454(01)00013-1 ↗
9. H.F. Shen and C. Beckermann: Metall. Mater. Trans. B, 2002, vol. 33B, pp. 69–78.10.1007/s11663-002-0087-1 ↗
10. M. Rappaz, J.M. Drezet, and M. Gremaud: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 449–55.10.1007/s11661-999-0334-z ↗
11. J.A. Williams and A.R.E. Singer: J. Int. Met., 1968, vol. 96, pp. 5–12.
12. H.F. Bishop, C.G. Ackerland, and W.S. Pellini: AFS Trans., 1957, vol. 65, p. 247.
13. J. Zhang and R.F. Singer: Acta Mater., 2002, vol. 50, pp. 1869–79.10.1016/S1359-6454(02)00042-3 ↗
14. J. Zhang and R.F. Singer: Z. Metallkd., 2002, vol. 93, pp. 806–11.10.3139/146.020806 ↗
15. J. Zhang: Scripta Mater., 2003, vol. 48, pp. 677–81.10.1016/S1359-6462(02)00559-6 ↗
16. G.S. Chen, P.R. Aimone, M. Gao, C.D. Miller, and R.P. Wei: J. Cryst. Growth, 1997, vol. 179, pp. 635–46.10.1016/S0022-0248(97)00134-6 ↗
17. N.P. Cheremisinoff: in Handbook of Ceramics and Composites, Marcel Dekker, Inc., New York, NY, 1990, p. 24.
18. J. Zhang and R.F. Singer: WTM Institute, University of Erlangen-Nuremberg, Erlangen, Germany, unpublished research, 2001.
19. E.W. Ross and K.S. O’Hara: in Superalloys 1992, S.D. Antolovich, R.W. Stusrud, R.A. MacKay, D.L. Anton, T. Khan, and R.D. Kissinger, eds., TMS, Warrendale, PA, 1992, pp. 257–65.
20. J.E. Doherty, B.H. Kear, and A.F. Giamei: JOM, 1971, Nov., pp. 59–62.10.1007/BF03355744 ↗
21. P. Lejcek and S. Hofmann: Crit. Rev. Solid State Mater. Sci., 1995, vol. 20, pp. 1–85.10.1080/10408439508243544 ↗
22. J. Liu, A. Lal, and R.M. German: Acta Mater., 1999, vol. 47, pp. 4615–26.10.1016/S1359-6454(99)00320-1 ↗
23. L. Battezzati and A.I. Greer: Acta Metall., 1989, vol. 37, pp. 1791–802.10.1016/0001-6160(89)90064-3 ↗