journal article·2005-09

Analysis of the γ → α transformation in a C-Mn steel by phase-field modeling

M. G. Mecozzi, J. Sietsma, S. van der Zwaag, M. Apel, P. Schaffnit, I. Steinbach

Publisher page

Abstract

This article deals with the austenite (γ) decomposition to ferrite (α) during cooling of a 0.10 wt pct C-0.49 wt pct Mn steel. A phase-field model is used to simulate this transformation. The model provides qualitative information on the microstructure that develops on cooling and quantitative data on both the ferrite fraction formed and the carbon concentration profile in the remaining austenite. The initial austenitic microstructure and the ferrite nucleation data, derived by metallographic examination and dilatometry, are set as input data of the model. The interface mobility is used as a fitting parameter to optimize the agreement between the simulated and experimental ferrite-fraction curve derived by dilatometry. A good agreement between the simulated α-γ microstructure and the actual α-pearlite microstructure observed after cooling is obtained. The derived carbon distribution in austenite during transformation provides comprehension of the nature of the transformation with respect to the interface-controlled or diffusion-controlled mode. It is found that, at the initial stage, the transformation is predominantly interface-controlled, but, gradually, a shift toward diffusion control takes place to a degree that depends on cooling rate.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Microstructure and Mechanical Properties of Steels · Magnetic Properties and Applications · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (29)

Show source-provided references
1. C. Zener: J. Appl. Phys., 1949, vol. 20, pp. 950–53.10.1063/1.1698258 ↗
2. H.K.D.H. Bhadeshia, L.E. Svennsson, and B. Gretoft: Acta Metall., 1985, vol. 33, pp. 1271–83.10.1016/0001-6160(85)90238-X ↗
3. R.A. Vandermeer: Acta Metall. Mater. 1990, vol. 38, pp. 2461–70.10.1016/0956-7151(90)90257-H ↗
4. Y. van Leeuwen, T.A. Kop, J. Sietsma, and S. van der Zwaag: J. Phys. IV. France, 1999, vol. 9, pp. 401–09.10.1051/jp4:1999941 ↗
5. T.A. Kop, Y. van Leeuwen, J. Sietsma, and S. van der Zwaag: Iron Steel Inst. Jpn. Int., 2000, vol. 40, pp. 713–18.10.2355/isijinternational.40.713 ↗
6. Y. van Leeuwen, J. Sietsma, and S. van der Zwaag: Iron Steel Inst. Jpn. Int., 2003, vol. 43, pp. 767–73.10.2355/isijinternational.43.767 ↗
7. J. Sietsma and S. van der Zwaag: Acta Mater., 2004, vol. 52, pp. 4143–52.10.1016/j.actamat.2004.05.027 ↗
8. G. Gaginalp: Phys. Rev. A, 1989, vol. 39, pp. 5887–96.10.1103/PhysRevA.39.5887 ↗
9. R. Kobayashy: Physica D, 1993, vol. 66, pp. 410–23.10.1016/0167-2789(93)90120-P ↗
10. J.B. McFadden, A.A. Wheeler, R.J. Braun, S.R. Coriell, and R.F. Sekerka: Phys. Rev. E, 1993, vol. 48, pp. 2016–24.10.1103/PhysRevE.48.2016 ↗
11. J.B. Collins and H. Levine: Phys. Rev. B, 1985, vol. 31, pp. 6119–22.10.1103/PhysRevB.31.6119 ↗
12. A.A. Wheeler, W.J. Boettinger, and G.B. McFadden: Phys. Rev. A, 1992, vol. 45, pp. 7424–39.10.1103/PhysRevA.45.7424 ↗
13. G. Gaginalp and W. Xie: Phys. Rev. E, 1993, vol. 48, pp. 1897–1909.10.1103/PhysRevE.48.1897 ↗
14. J.A. Warren and W.J. Boettinger: Acta Metall. Mater., 1996, vol. 43, pp. 689–703.10.1016/0956-7151(94)00285-P ↗
15. A.A. Wheeler, G.B. McFadden, and W.J. Boettinger: Proc. R. Soc. London Ser. A, 1996, vol. 452, p. 495.10.1098/rspa.1996.0026 ↗
16. A. Karma: Phys. Rev. E, 1994, vol. 49, pp. 2245–50.10.1103/PhysRevE.49.2245 ↗
17. S.G. Kim, W.T. Kim, and T. Suzuki: Phys. Rev. E, 1998, vol. 58, pp. 3316–23.10.1103/PhysRevE.58.3316 ↗
18. I. Steinbach, F. Pezzolla, B. Nestler, M. Seeßelberg, R. Prieler, G.J. Schmitz, and J.L.L. Rezende: Physica D, 1996, vol. 94, pp. 135–47.10.1016/0167-2789(95)00298-7 ↗
19. J. Tiaden, B. Nestler, H.J. Diepers, and I. Steinbach: Physica D, 1998, vol. 115, pp. 73–86.10.1016/S0167-2789(97)00226-1 ↗
20. D.H. Yeon, P.R. Cha, and J.K. Yoon: Scripta Mater., 2001, vol. 45, pp. 661–68.10.1016/S1359-6462(01)01077-6 ↗
21. G. Pariser, P. Shaffnit, I. Steinbach, and W. Bleck: Steel Res., 2001, vol. 72, pp. 354–60.10.1002/srin.200100130 ↗
22. T.A. Kop, J. Sietsma, and S. van der Zwaag: J. Mater. Sci., 2001, vol. 36, pp. 519–26.10.1023/A:1004805402404 ↗
23. B. Sundman, B. Jansson, and J.-O. Andersson: CALPHAD, 1985, vol. 9, pp. 153–90.10.1016/0364-5916(85)90021-5 ↗
24. G.P. Krielaart and S. van der Zwaag: Mater. Sci. Technol., 1998, vol. 14, pp. 10–18.10.1179/mst.1998.14.1.10 ↗
25. M. Militzer: Material Science & Technology 2003, Austenite Formation and Decomposition, Chicago, IL, Iron and Steel Society, TMS, 2003, pp. 195–211.
26. W.F. Lange, M. Enomoto, and H.I. Aaronson: Metall. Trans. A, 1988, vol. 19A, pp. 427–40.10.1007/BF02649256 ↗
27. Handbook of Chemistry and Physics, CRC Press Inc., Boca Raton, FL, 1989.
28. M.G. Mecozzi, J. Sietsma, S. van der Zwaag, M. Apel, P. Schaffnit, and I. Steinbach: Material Science & Technology 2003, Austenite Formation and Decomposition, Chicago, IL, Iron and Steel Society, TMS 2003, pp. 353–66.
29. T.A. Kop, J. Sietsma, and S. van der Zwaag: Mater. Sci. Technol., 2001, vol. 17, pp. 1569–74.10.1179/026708301101509629 ↗