journal article·2015-06Open access

Effects of Small Addition of Ti on Strength and Microstructure of a Cu-Ni-Si Alloy

Chihiro Watanabe, Satoshi Takeshita, Ryoichi Monzen

Abstract

The effect of addition of 0.04 or 0.2 mass pct Ti on the mechanical properties of a Cu-2.0 mass pct Ni-0.5 mass pct Si alloy has been investigated. The addition of 0.04 mass pct Ti enhances the strength of the Cu-Ni-Si alloy without reducing its electrical conductivity. This increase in strength is caused by the decrease in inter-precipitate spacing of δ-Ni2Si precipitates. The addition of trace Ti reduces the equilibrium concentration of Ni and Si atoms in the alloy bearing the δ precipitates, resulting in an increase in the volume fraction of δ precipitates and decrease in the inter-precipitate spacing. However, the addition of 0.2 mass pct Ti to the Cu-Ni-Si alloy decreases the strength of the alloy. The reduction in strength is attributed to the decrease in the volume fraction of δ precipitates caused by the reduction in Ni and Si atoms in the Cu matrix resulting from the formation of Ni16Si7Ti6 particles. © 2015 The Minerals, Metals & Materials Society and ASM International
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · High Temperature Alloys and Creep · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (20)

Show source-provided references
1. S. A. Lockyer and F. W. Noble: J. Mater. Sci., 1994, vol. 46, pp. 218-226.10.1007/BF00356596 ↗
2. H. J. Ryu, H. K. Baik and S. H. Hong: J. Mater. Sci., 2000, vol. 35, pp. 3641-3646.10.1023/A:1004830000742 ↗
3. N. Era and K. Fukamachi: J. JRICu., 2005, vol. 44, pp. 136-139.
4. H. Fujiwara, T. Sato and A. Kamio: J. Jpn. Inst. Metals, 1998, vol. 62, pp. 301-309.10.2320/jinstmet1952.62.4_301 ↗
5. C. Watanabe, F. Nishijima, R. Monzen and K. Tazaki: Mater. Sci. Forum, 2007, vols. 561-565, pp. 2321-2324.10.4028/www.scientific.net/MSF.561-565.2321 ↗
6. E. Lee, S. Han, K. Euh, S. Lim and S. Kim: Met. Mater. Int., 2011, vol. 17, pp. 569-576.10.1007/s12540-011-0807-7 ↗
7. X. Hu, G. Chen, C. Ion and K. Ni: J. Phase Equilibria, 1999, vol. 20, pp. 508-514.10.1361/105497199770340761 ↗
8. J. O. Linde: Helv. Phys. Acta, 1968, vol. 41, pp. 1007-1015.
9. H.J. Wollenberger, in: R.W. Cahn, P. Haasen (Eds.), Physical Metallurgy, vol. 9, Elsevier, Amsterdam, 1983, pp. 1189-1221.
10. B.R. Watts: in: Dislocation in Solids, F.R.N. Nabarro, ed., Elsevier, Amsterdam, 1989, vol. 8, pp. 175-419.
11. Z. S. Basinski, J. S. Dufdale and A. Howie: Philos. Mag., 1963, vol. 8, pp. 1989-1997.10.1080/14786436308209092 ↗
12. A. Boltax: Trans. AIME, 1960, vol. 218, pp. 812-21.
13. S. Komatsu: J. JRICu., 2002, vol. 41, pp. 1-9.
14. C. Watanabe and R. Monzen: J. Mater. Sci., 2011, vol. 46, pp. 4327-4335.10.1007/s10853-011-5261-x ↗
15. I. M. Lifshitz and V. V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35-50.10.1016/0022-3697(61)90054-3 ↗
16. C. Wagner: Z. Elektrochm., 1961, vol. 65, pp. 581-591.
17. A. J. Ardell: Acta Metall., 1967, vol. 15. pp. 1772-1775.10.1016/0001-6160(67)90073-9 ↗
18. S. A. Lockyer and F. W. Noble: Mater. Sci. Technol., 1999, vol. 15, pp. 1147-1153.10.1179/026708399101505194 ↗
19. M.F. Ashby: in Oxide Dispersion Strengthening, Gordon & Beach, New York, 1968, p. 31.
20. J.W. Martin: in Micromechanism in Particle-Hardened Alloys, Cambridge University Press, Cambridge, 1980, p. 44.