Effect of Destabilizing Heat Treatment on Solid-State Phase Transformation in High-Chromium Cast Irons
Source abstract
Abstract
This work describes the influence of secondary carbide precipitation at destabilizing heat treatment on kinetics of austenite phase transformation at a subcritical range of temperatures in high-Cr cast irons, alloyed with 4 to 6 wt pct of Mn or by complex Mn-Ni-Mo (Mn-Cu-Mo). The samples were soaked at 1073 K to 1373 K (800 °C to 1100 °C) (destabilization) or at 573 K to 973 K (300 °C to 700 °C) (subcritical treatment); the combination of destabilization and subcritical treatment was also used. The investigation was carried out with application of optical and electron microscopy and bulk hardness measurement. Time-temperature-transformation (TTT) curves of secondary carbide precipitation and pearlite transformation for as-cast austenite and destabilized austenite were built in this work. It was determined that the secondary carbide precipitation significantly inhibited the pearlite transformation rate at 823 K to 973 K (550 °C to 700 °C). The inhibition effect is more evident in cast irons alloyed with complex Mn-Ni-Mo or Mn-Cu-Mo. The possible reasons for transformation decelerating could be austenite chemical composition change (enriching by Ni, Si, and Cu, and depleting by Cr) and stresses induced by secondary carbide precipitation.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal Alloys Wear and Properties · Microstructure and Mechanical Properties of Steels · Advanced materials and composites
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. I.I. Tsypin: Wear-Resistant White Cast Irons. Structure and Properties, Metallurgical Publishing House, Moscow, 1983, pp. 150–70 (in Russian).
2. R.W. Durman: Int. J. Miner. Proc., 1988, vol. 22, pp. 381–99.10.1016/0301-7516(88)90074-9 ↗
3. E. Zumelzu, I. Goyos, C. Cabezas, O. Optitz, and A. Parada: J. Mater. Process. Technol., 2002, vol. 128 (1–3), pp. 250–55.10.1016/S0924-0136(02)00458-2 ↗
4. O.N. Dogan, J.A. Hawk, and G. Laird II: Metall. Mater. Trans. A, 1997, vol. 28A, pp. 1315–28.10.1007/s11661-997-0267-3 ↗
5. C.P. Tabrett and I.R. Sare: Scripta Mater., 1998, vol. 38, pp. 1747–53.10.1016/S1359-6462(98)00118-3 ↗
6. W. Jun, S. Zhiping, Z. Rulin, L. Cong, S. Baoluo, G. Shenji, and H. Sijiu: J. Mater. Eng. Perform., 2006, vol. 15, pp. 316–19.10.1361/105994906X108602 ↗
7. G. Laird II: AFS Trans., 1991, vol. 99, pp. 339–57.
8. S. Inthidech, K. Boonmak, P. Sricharoenchai, N. Sasaguri, and Y. Matsubara: Mater. Trans., 2010, vol. 51 (7), pp. 1264–71.10.2320/matertrans.M2010018 ↗
9. A.E. Karantzalis, A. Lekatou, and H. Mavros: J. Mater. Eng. Perform., 2009, vol. 18 (2), pp. 174–81.10.1007/s11665-008-9285-6 ↗
10. A. Bedolla-Jacuinde, L. Arias, and B. Hernandez: J. Mater. Eng. Perform., 2003, vol. 12 (4), pp. 371–82.10.1361/105994903770342881 ↗
11. A.E. Karantzalis, A. Lekatou, and E. Diavati: J. Mater. Eng. Perform., 2009, vol. 18 (8), pp. 1078–85.10.1007/s11665-009-9353-6 ↗
12. W. Jun, L. Cong, L. Haohuai, Y. Hongshan, S. Baoluo, G. Shenji, and H. Sijiu: Mater. Charact., 2006, vol. 56, pp. 73–78.10.1016/j.matchar.2005.10.002 ↗
13. A.E. Karantzalis, A. Lekatou, A. Kapoglou, H. Mavros, and V. Dracopoulos: J. Mater. Eng. Perform., 2012, vol. 21 (6), pp. 1030–39.10.1007/s11665-011-9995-z ↗
14. D. Kmetic, F. Mlakar, V. Tucič, J. Žvokelj, F. Vodopivec, M. Jakupovič, and B. Ralič: Železarski Zbornik, 1987, vol. 21 (4), pp. 151–65.
15. G.L.F. Powell and G. Laird II: J. Mater. Sci., 1992, vol. 27, pp. 29–35.10.1007/BF02403640 ↗
16. F. Maratray: Trans. AFS, 1971, vol. 79, pp. 121–24.
17. A. Wienngmoon, T. Chairuangsri, and J.T.H. Pearce: Iron Steel Inst. Jpn. Int., 2004, vol. 44 (2), pp. 396–403.10.2355/isijinternational.44.396 ↗
18. P. Amorim, H. Santos, J. Santos, S. Coimbra, and C. Sá: Mater. Sci. Forum, 2004, vols. 455–456, pp. 290–94.10.4028/www.scientific.net/MSF.455-456.290 ↗
19. W.W. Cias: Trans. AFS, 1974, vol. 82, pp. 317–28.
20. E.V. Rozhkova, M.E. Garber, and I.I. Tsypin: Met. Sci. Heat Treatment, 1981, vol. 23 (1), pp. 59–63.10.1007/BF00700308 ↗
21. E.V. Rozhkova, S.S. Mikhailovskaya, and I.I. Tsypin: Met. Sci. Heat Treatment, 1983, vol. 25 (4), pp. 277–81.10.1007/BF00778321 ↗
22. G. Laird II and G.L.F. Powell: Metall. Trans. A, 1993, vol. 24A, pp. 981–88.10.1007/BF02656520 ↗
23. W. Fu, Z. Wang, T. Jing, and Y. Zheng: J. Mater. Sci Technol., 1998, vol. 14, pp. 478–80.10.1179/026708398790301142 ↗
24. O. Erić, D. Rajnović, S. Zec, L. Sidjanin, and M.T. Jovanović: Mater. Charact., 2006, vol. 57 (4–5), pp. 211–17.10.1016/j.matchar.2006.01.014 ↗
25. V.S. Mes’kin: Basis of Steel Alloying, Metallurgical Publishing House, Moscow, 1964, pp. 124–179 (in Russian).
26. J. Chen, S. Tang, Z. Liu, and G. Wang: Mater. Design, 2013, vol. 49, pp. 465–70.10.1016/j.matdes.2013.01.017 ↗
27. J.D.B. DeMello, M. Durand-Charre, and S. Hamar-Thibault: Metall. Trans. A, 1983, vol. 14A, pp. 1793–01.10.1007/BF02645549 ↗
28. Y. Yokomizo, K. Yamamoto, N. Sasaguri, and Y. Matsubara: Key Eng. Mater., 2010, vol. 457, pp. 237–42.10.4028/www.scientific.net/KEM.457.237 ↗
29. Steel Castings Handbook, Suppl. 11, Hardenability and Heat Treatment, SFSA, 1985, pp. 3–10.
30. J.G. Wang, L.C. Zhang, G.L. Chen, and H.Q. Ye: J. Mater. Sci., 1998, vol. 33, pp. 2563–71.10.1023/A:1004397001175 ↗
31. M. Dalgic and G. Löwisch: J. Heat Treatment Mater., 2004, vol. 1, pp. 28–34.10.3139/105.100271 ↗
32. E. Pagounis and V.K. Lindroos: Scripta Mater., 1997, vol. 37 (1), pp. 65–69.10.1016/S1359-6462(97)00054-7 ↗
33. ASM Ready Reference: Thermal Properties of Metals, ASM INTERNATIONAL, Materials Park, OH, 2002, pp. 12–13.
34. M.C. Uslu, D. Canadinc, H.-G. Lambers, S. Tschumak, and H.J. Maier: Model. Simul. Mater. Sci. Eng., 2011, vol. 19 (4), pp. 045007–045023.10.1088/0965-0393/19/4/045007 ↗
35. P.H. Shipway and H.K.D.H. Bhadeshia: Mater. Sci. Eng., A, 1995, vol. 201 (1–2), pp. 143–49.10.1016/0921-5093(95)09769-4 ↗
36. E.A. Rumiantzev, V.F. Saveliev, and V.M. Sagalevich: Met. Sci. Heat Treatment, 1983, vol. 2, pp. 39–41 (in Russian).
37. L. Weijuan and Z. Shoubin: Advances in Intelligent and Soft Computing, Polish Academy of Science, Poland, 2012, vol. 114, pp. 261–68.