Solidification of Metallic Alloys: Does the Structure of the Liquid Matter?
Source abstract
Abstract
In 1952, Frank (Proc R Soc Lond Ser-Math Phys Sci 215:43-46, 1952) already postulated that Icosahedral Short Range Order (ISRO) of atoms in the liquid could possibly explain the large nucleation undercoolings measured in metallic alloys by Turnbull and Fisher (J Chem Phys 17:71-73, 1949). About thirty years later, this conjecture was proven to be key for the understanding of Quasicrystals (QC) formation (Shechtman et al. in Phys Rev Lett 53:20, 1951-3, 1984). More recently, it has been found that a few tens to thousand ppm of solute elements in Al-base and Au-base alloys can influence the nucleation and growth of the primary fcc phase via mechanisms involving ISRO and QC formation. ISRO has also been found to limit the mobility, and thus diffusion, of atoms in the liquid. This can lead to out-of-equilibrium conditions, e.g., the formation of metastable phases or supersaturated solid solution, at reduced velocity compared to alloys where ISRO is not predominantly present. Finally, there are several experimental evidences that ISRO is also responsible for twinned dendrites formation in Al alloys. The present contribution summarizes these recent findings and points out the implications that these might have in the field of solidification and additive manufacturing.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Quasicrystal Structures and Properties · Solidification and crystal growth phenomena · Material Dynamics and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (46)
Show source-provided references
1. W. Kurz and D.J. Fisher: Fundamentals of solidification, Trans. Tech. Publ. Ltd, 4th ed., 1998, Switzerland.10.4028/www.scientific.net/RC.35 ↗
2. J.A. Dantzig and M. Rappaz: Solidification, EPFL Press, Presses Polytechniques et Universitaires Romandes, 2nd ed., 2016, Switzerland.
3. 3.C. Herring: in The Physics of Powder Metallurgy, 1951, McGraw-Hill., New York: W.E. Kingston, pp. 143–179.
4. 4.S. Liu, R. E. Napolitano, and R. Trivedi: Acta Mater., 2001, vol. 49 (20), pp. 4271–4276.10.1016/S1359-6454(01)00306-8 ↗
5. F. Gonzales and M. Rappaz: Met. Mater. Trans. A vol. 37(9), 2797–2806, 2006.10.1007/BF02586112 ↗
6. 6.M. Becker, J.A. Dantzig, M. Kolbe, S.T. Wiese, and F. Kargl: Acta Mater., 2019, vol. 165, pp. 666–677.10.1016/j.actamat.2018.12.001 ↗
7. F. Frank: Proc. Roy. Soc. Lond. Ser. Math. Phys. Sci. vol. 215(1120), pp. 43–46 (1952).
8. 8.D. Turnbull and J.C. Fisher: J. Chem. Phys., 1949, vol. 17, pp. 71–73.10.1063/1.1747055 ↗
9. 9.D. Shechtman, I. Blech, D. Gratias, and J.W. Cahn: Phys. Rev. Lett., 1984, vol. 53 (20), pp. 1951–1953.10.1103/PhysRevLett.53.1951 ↗
10. 10.M.J. Cooper: Acta Crystallogr., 1960, vol. 13, pp. 257-263.10.1107/S0365110X60000571 ↗
11. 11.D.W. Deng, Z.M. Mo, and K.H. Kuo: J. Phys. Condens. Mater., 2004, vol. 16, pp. 2283–2296.10.1088/0953-8984/16/13/009 ↗
12. 12.H. Büchler and K.J. Range: J. Common. Met., 1990, vol. 161, pp. 347–354.10.1016/0022-5088(90)90047-N ↗
13. H. Euchner, M. Mihalkovîc, F. Gähler, M. R. Johnson, H. Schober, S. Rols, E. Suard, A. Bosak, S. Ohhashi, A.-P. Tsai, S. Lidin, C. Pay Gomez, J. Custers, S. Paschen, and M. de Boissieu: Phys. Rev. B, 2011, vol. 83, Article Id 144202.
14. 14.M. Boudard: J. Alloys Comp., 2010, vol. 495, pp. 365–371.10.1016/j.jallcom.2009.10.063 ↗
15. 15.D. Holland-Moritz, T. Schenk, V. Simonet, R. Bellissent, P. Convert, and T. Hansen: J. Alloys Comp., 2002, vol. 342, pp. 77–81.10.1016/S0925-8388(02)00142-1 ↗
16. A. Pasturel and N. Jakse: Appl. Phys. Lett., 2017, vol. 110, art. id 121902.10.1063/1.4978392 ↗
17. A. Pasturel and N. Jakse: J. Chem. Phys., 2017, vol. 146, art. id 184502.10.1063/1.4982887 ↗
18. 18.K. F. Kelton: Int. Mater. Rev., 1993, vol. 38 (3), pp. 105–137.10.1179/imr.1993.38.3.105 ↗
19. G. Kurtuldu, K.F. Shamlaye, J.F. Löffler: Proc. Natl. Acad. Sci. U.S.A. 115(24), 6123–6128 (2018).10.1073/pnas.1717941115 ↗
20. 20.K. Kirihara, T. Nakata, M. Takata, Y. Kubota, E. Nishibori, K. Kimura, and M. Sakata: Phys. Rev. Lett., 2000, vol. 85 (16), pp. 3468–3471.10.1103/PhysRevLett.85.3468 ↗
21. 21.M. Döblinger, R. Wittmann, D. Gerthsen, and B. Grushko: Philos. Mag., 2003, vol. 83 (9), pp. 1059–1074.10.1080/0141861031000071980 ↗
22. 22.A. R. Kortan, H. S. Chen, J. M. Parsey, and L. C. Kimerling: J. Mater. Sci., 1989, vol. 24 (6), pp. 1999–2005.10.1007/BF02385413 ↗
23. 23.A. I. Goldman and R. F. Kelton: Rev. Mod. Phys., 1993, vol. 65 (1), pp. 213–230.10.1103/RevModPhys.65.213 ↗
24. 24.J. H. Xia, G. Sha, Z. G. Chen, X. Z. Liao, H. W. Liu, and S. P. Ringer: Philos. Mag. Lett., 2013, vol. 93 (2), pp. 77–84.10.1080/09500839.2012.745016 ↗
25. 25.T. Boncina and F. Zupanic: Arch. Met. Mater., 2017, vol. 62 (1), pp. 5–9.10.1515/amm-2017-0001 ↗
26. 26.G. Kurtuldu, Ph. Jarry, and M. Rappaz: Acta Mater., 2013, vol. 61 (19), pp. 7098–7108.10.1016/j.actamat.2013.07.056 ↗
27. 27.S. Ino: J. Phys. Soc. Jpn., 1969, vol. 27 (4), pp. 941–953.10.1143/JPSJ.27.941 ↗
28. G. Kurtuldu: Influence of trace elements on the nucleation and solidification morphologies of fcc alloys and relationship with icosahedral quasicrystal formation. PhD thesis #6057, Ecole Polytechnique Fédérale de Lausanne, 2014.
29. 29.G. Kurtuldu, A. Sicco, and M. Rappaz: Acta Mater., 2014, vol. 70, pp. 240–248.10.1016/j.actamat.2014.02.037 ↗
30. 30.G. Kurtuldu, P. Jessner, and M. Rappaz: J. Alloys. Comp., 2015, vol. 621, pp. 283–286.10.1016/j.jallcom.2014.09.174 ↗
31. C.J. Essig: Dental Metallurgy: A manual for the Use of dental students, 3rd edn. The SS White Dental Mfg Co, Philadelphia, 1893.
32. 32.J. Nielsen and J. Tuccillo: J. Dent. Res., 1966, vol. 45, pp. 964–969.10.1177/00220345660450037701 ↗
33. 33.A. Tsai, J. Guo, E. Abe, H. Takakura, and T. Sato: Nature, 2000, vol. 408 (6812), pp. 537–538.10.1038/35046202 ↗
34. 34.K. Deguchi, S. Matsukawa, N. K. Sato, T. Hattori, K. Ishida, H. Takakura and T. Ishimasa: Nature Mater., 2012, vol. 11 (12), pp. 1013–1016.10.1038/nmat3432 ↗
35. S. Matsukawa, K. Tanaka, M. Nakayama, K. Deguchi, K. Imura, H. Takakura, S. Kashimoto, T. Ishimasa and N. K. Sato: J. Phys. Soc. Jpn., 2014, vol. 83 (3), art. id 034705.10.7566/JPSJ.83.034705 ↗
36. L. Favre: “Etude de l’affinage de la microstructure de coulée via adjonction d’éléments d’alliage.” Master thesis, Ecole Polytechnique Fédérale de Lausanne, 2018.
37. 37.J. Zollinger, B. Rouat, S. K. Pillai, and M. Rappaz: Met. Mater. Trans. A, 2019, vol. 50, pp. 2279–2288.10.1007/s11661-019-05176-2 ↗
38. G. Kurtuldu, Ph. Jarry, and M. Rappaz: Met. Mater. Trans. A, 2019, Vol. 51(1), 279–288.10.1007/s11661-019-05493-6 ↗
39. 39.M. Rappaz and G. Kurtuldu: JOM, 2015, vol. 67 (8), pp. 1812–1820.10.1007/s11837-015-1328-5 ↗
40. 40.G. Kurtuldu, P. Jarry, and M. Rappaz: Acta Mater., 2016, vol. 115, pp. 423–433.10.1016/j.actamat.2016.05.051 ↗
41. 41.J. Hérenguel: Rev. Met. Paris, 1948, vol. 45, pp. 139–146.10.1051/metal/194845050139 ↗
42. 42.S. Henry, P. Jarry, and M. Rappaz: Met. Mater. Trans., 1998, vol. 29 (11), pp. 2807–2817.10.1007/s11661-998-0321-9 ↗
43. 43.S. Henry, G. Gruen, and M. Rappaz: Met. Mater. Trans., 2004, vol. 35A (8), pp. 2495–2501.10.1007/s11661-006-0229-1 ↗
44. 44.M. A. Salgado-Ordorica, J.-L. Desbiolles, and M. Rappaz: Acta Mater., 2011, vol. 59 (13), pp. 5074–5084.10.1016/j.actamat.2011.04.033 ↗
45. 45.M. A. Salgado-Ordorica, P. Burdet, M. Cantoni, and M. Rappaz: Acta Mater., 2011, vol. 59 (13), pp. 5085–5091.10.1016/j.actamat.2011.04.034 ↗
46. 46.S. Henry, T. Minghetti, and M. Rappaz: Acta Mater., 1998, vol. 46 (18), pp. 6431–6443.10.1016/S1359-6454(98)00308-5 ↗