journal article·2017-04

Accelerated Stress Corrosion Crack Initiation of Alloys 600 and 690 in Hydrogenated Supercritical Water

Tyler Moss, Gary S. Was

Publisher page

Abstract

The objective of this study is to determine whether stress corrosion crack initiation of Alloys 600 and 690 occurs by the same mechanism in subcritical and supercritical water. Tensile bars of Alloys 690 and 600 were strained in constant extension rate tensile experiments in hydrogenated subcritical and supercritical water from 593 K to 723 K (320 °C to 450 °C), and the crack initiation behavior was characterized by high-resolution electron microscopy. Intergranular cracking was observed across the entire temperature range, and the morphology, structure, composition, and temperature dependence of initiated cracks in Alloy 690 were consistent between hydrogenated subcritical and supercritical water. Crack initiation of Alloy 600 followed an Arrhenius relationship and did not exhibit a discontinuity or change in slope after crossing the critical temperature. The measured activation energy was 121 ± 13 kJ/mol. Stress corrosion crack initiation in Alloy 690 was fit with a single activation energy of 92 ± 12 kJ/mol across the entire temperature range. Cracks were observed to propagate along grain boundaries adjacent to chromium-depleted metal, with Cr2O3 observed ahead of crack tips. All measures of the SCC behavior indicate that the mechanism for stress corrosion crack initiation of Alloy 600 and Alloy 690 is consistent between hydrogenated subcritical and supercritical water.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Advanced Materials Characterization Techniques · High-Temperature Coating Behaviors · Hydrogen embrittlement and corrosion behaviors in metals

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (32)

Show source-provided references
1. P. L. Andresen and M. M. Morra: Corrosion, 2008, vol. 64, pp. 15.10.5006/1.3278457 ↗
2. P. M. Scott: Corrosion, 2000, vol. 56, pp. 771.10.5006/1.3280580 ↗
3. J. Panter, B. Viguier, J. Cloue, M. Foucault, P. Combrade, and E. Andrieu: J. Nucl. Mater., 2006, vol. 348, pp. 213.10.1016/j.jnucmat.2005.10.002 ↗
4. L. E. Thomas and S. M. Bruemmer: Corrosion, 2000, vol. 56, pp. 572.10.5006/1.3280561 ↗
5. R. B. Rebak and Z. Szklarska-Smialowska: Corrosion, 1995, vol. 51, pp. 376.10.5006/1.3293602 ↗
6. R. Bandy and D. Van Rooyen: Corrosion, 1984, vol. 40, pp. 425.10.5006/1.3593950 ↗
7. G. Economy, R. J. Jacko, and F. W. Pement: Corrosion, 1987, vol. 43, pp. 727.10.5006/1.3583859 ↗
8. P.L. Andresen, M.M. Morra, and K. Ahluwalia: Proceedings of 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Reactions (Wiley, New York, 2012), pp. 161–76.10.1002/9781118456835.ch19 ↗
9. S.M. Bruemmer, M.J. Olszta, M.B. Toloczko, and L.E. Thomas: Proceedings of 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Reactions (Wiley, New York, 2012), pp. 301–14.10.1002/9781118456835.ch28 ↗
10. K. Tsutsumi and T. Couvant: Proceedings of 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Reactions (Wiley, New York, 2012), pp. 41–52.10.1002/9781118456835.ch6 ↗
11. Q. Peng, T. Shoji, J. Hou, Y. Takeda, and T. Yonezawa: Proceedings of 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Reactions (Wiley, New York, 2012), pp. 149–58.10.1002/9781118456835.ch17 ↗
12. K. Arioka, T. Yamada, T. Miyamoto, and T. Terachi: Corrosion, 2011, vol. 67, pp. 35006.10.5006/1.3563640 ↗
13. S. Medway: EPRI MRP PWSCC Expert Panel Meet. (Tampa, FL, 2012).
14. R. B. Rebak, Z. Xia, and Z. Szklarska-Smialowska: Corrosion, 1995, vol. 51, p. 689.10.5006/1.3293632 ↗
15. J. Hickling and K. Ahluwalia: Report No. MRP-237, Rev. 1—1018130, EPRI, Palo Alto, CA, 2008.
16. K. Ahluwalia: MRP-237, Rev. 2—3002000190, Palo Alto, CA, 2013.
17. J. Gorman: EPRI MRP PWSCC Expert Panel Meet. (Tampa, FL, 2013).
18. W. Sims, B. Rudell, P. Crooker, and G. White: NRC-Industry Mater. R&D Tech Updat. Meet (Rockville, MD).
19. D. S. Morton: EPRI MRP PWSCC Expert Panel Meet. (Tampa, FL, 2010).
20. M.B. Toloczko, M. J. Olszta, and S. Bruemmer: EPRI MRP PWSCC Expert Panel Meet. (Tampa, FL, 2013).
21. T. Moss, G. S. Was, G. Cao, V. Firouzdor, and T. R. Allen: EPRI MRP PWSCC Expert Panel Meet. (Tampa, FL, 2011).
22. S. Teysseyre and G. S. Was: Corrosion, 2006, vol. 62, pp. 1100.10.5006/1.3278244 ↗
23. T. Moss and G. S. Was: J. Electrochem. Soc., 2015, vol. 162, pp. C35.10.1149/2.0421501jes ↗
24. S. Lozano-Perez: Micron, 2008, vol. 39, pp. 320.10.1016/j.micron.2007.12.003 ↗
25. B. Alexandreanu and G. S. Was: Philos. Mag. A, 2001, vol. 81, pp. 1951.10.1080/01418610010019143 ↗
26. D.L. Smith: Probability, Statistics, and Data Uncertainties in Nuclear Science and Technology, American Nuclear Society, LaGrange Park, IL, 1991.
27. T. Moss and G.S. Was: Proceedings of 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Reactions (Asheville, NC, 2013).
28. E. Richey, D.S. Morton, and R.A. Etien: Proceedings of 13th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Reactions (Canadian Nuclear Society, Whistler, BC, 2007).
29. R.A. Etien, E. Richey, D.S. Morton, and J. Eager: Proceedings of 15th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Reactions (Wiley, New York, 2011), pp. 2407–17.10.1007/978-3-319-48760-1_145 ↗
30. M. Sennour, P. Laghoutaris, C. Guerre, and R. Molins: J. Nucl. Mater., 2009, vol. 393, pp. 254.10.1016/j.jnucmat.2009.06.014 ↗
31. M.J. Olszta, D.K. Schreiber, M.B. Toloczko, and S.M. Bruemmer: Proceedings of 16th International Conference on Environmental Degradation of Materials in Nuclear Power Systems Reactions (Asheville, NC, 2013).
32. T. Moss, G. Cao, and G.S. Was: Metall. Trans. A (submitted).