Scaling up of High-Pressure Sliding (HPS) for Grain Refinement and Superplasticity
Source abstract
Abstract
The process of high-pressure sliding (HPS) is a method of severe plastic deformation developed recently for grain refinement of metallic materials under high pressure. The sample for HPS is used with a form of sheet or rod. In this study, an HPS facility with capacities of 500 tonnes for vertical pressing and of 500 and 300 tonnes for horizontal forward and backward pressings, respectively, was newly built and applied for grain refinement of a Mg alloy as AZ61, Al alloys such as Al-Mg-Sc, A2024 and A7075 alloys, a Ti alloy as ASTM-F1295, and a Ni-based superalloy as Inconel 718. Sheet samples with dimensions of 10 to 30 mm width, 100 mm length, and 1 mm thickness were processed at room temperature and ultrafine grains with sizes of ~200 to 300 nm were successfully produced in the alloys. Tensile testing at elevated temperatures confirmed the advent of superplasticity with total elongations of more than 400 pct in all the alloys. It is demonstrated that the HPS can make all the alloys superplastic through processing at room temperature with a form of rectangular sheets.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and mechanical properties · Aluminum Alloys Composites Properties · Surface Treatment and Residual Stress
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (42)
Show source-provided references
1. E.O. Hall: Proc. Phys. Soc. London B, 1951, vol. 64, pp. 747-753.10.1088/0370-1301/64/9/303 ↗
2. N.J. Petch: J. Iron Steel Inst., 1953, vol. 174, pp. 25-28.
3. X. Huang, N. Hansen and N. Tsuji: Science, 2006, vol. 312, pp. 249-251.10.1126/science.1124268 ↗
4. J. W. Edington, K. N. Melton and C. P. Cutler, Prog. Mater. Sci., 1976, vol. 21, pp. 61-158.10.1016/0079-6425(76)90005-0 ↗
5. T.G. Langdon: Metall. Mater. Trans. A, 1982, vol. 13A, pp. 689-701.10.1007/BF02642383 ↗
6. O.D. Sherby, J. Wadsworth, Prog. Mater. Sci., 1989, vol. 33, pp. 169-221.10.1016/0079-6425(89)90004-2 ↗
7. T. R. Bieler and A.K. Mukherjee: Mater. Sci. Eng. A, 1990, vol. 128, pp. 171-182.10.1016/0921-5093(90)90225-R ↗
8. T.G. Nieh, J. Wadsworth, and O.D. Sherby: in Superplasticity in Metals and Ceramics, D.R. Clarke, S. Suresh, and I.M. Ward, eds., Cambridge University Press, Cambridge, 1997, p. 32.10.1017/CBO9780511525230 ↗
9. F.A. Mohamed and T.G. Langdon: Scr. Metall., 1976, vol. 10, pp. 759-762.10.1016/0036-9748(76)90358-6 ↗
10. K. Higashi, Met. Mater. Int., 1998, vol. 4, pp. 498–502.10.1007/BF03187816 ↗
11. R.Z. Valiev, R.K. Islamgaliev and I.V. Alexandrov: Prog. Mater. Sci., 2000, vol. 45, pp. 103-189.10.1016/S0079-6425(99)00007-9 ↗
12. R.Z. Valiev, Y. Estrin, Z. Horita, T.G. Langdon, M.J. Zehetbauer and Y.T. Zhu: JOM, 2006, vol. 58 (4), pp. 33-39.10.1007/s11837-006-0213-7 ↗
13. [13] Y. Estrin and A. Vinogradov: Acta Mater., 2013, vol. 61, pp. 782–817.10.1016/j.actamat.2012.10.038 ↗
14. P.W. Bridgman: Phys. Rev., 1935, vol. 48, pp. 825-847.10.1103/PhysRev.48.825 ↗
15. A.P. Zhilyaev and T.G. Langdon: Prog. Mater. Sci., 2008, vol. 53, pp.893-979.10.1016/j.pmatsci.2008.03.002 ↗
16. K. Edalati and Z. Horita: Mater. Sci. Eng. A, 2016, vol. 652, pp. 325-352.10.1016/j.msea.2015.11.074 ↗
17. T. Waitz, V. Kazykhanov and H.P. Karnthaler: Acta Mater., 2004, vol. 52, pp. 137-147.10.1016/j.actamat.2003.08.036 ↗
18. J.Y. Huang, Y.T. Zhu, X.Z. Liao and R.Z. Valiev: Phil. Mag. Lett., 2004, vol. 84, pp. 183-190.10.1080/09500830310001657353 ↗
19. C. Rentenberger, T. Waitz and H.P. Karnthaler: Mater. Sci. Eng. A, 2007, vol. 462, pp. 283-288.10.1016/j.msea.2006.03.151 ↗
20. C. Mangler, C. Gammer, H.P. Karnthaler and C. Rentenberger: Acta Mater., 2010, vol. 58, pp. 5631-5638.10.1016/j.actamat.2010.06.036 ↗
21. K. Edalati, S. Toh, H. Iwaoka, M. Watanabe, Z. Horita, D. Kashioka, K. Kishida and H. Inui: Scripta Mater., 2012, vol. 67, pp. 814-817.10.1016/j.scriptamat.2012.07.030 ↗
22. K. Edalati, J. Matsuda, H. Iwaoka, S. Toh, E. Akiba and Z. Horita: Int. J. Hydrogen Energy, 2013, vol. 38, pp. 4622-4627.10.1016/j.ijhydene.2013.01.185 ↗
23. R. K. Islamgaliev, R. Kuzel, S. N. Mikov, A. V. Igo, J. Burianek, F. Chmelik and R. Z. Valiev: Mater. Sci. Eng. A, 1999, vol. 266, pp. 205-210.10.1016/S0921-5093(99)00030-1 ↗
24. Y. Ikoma, K. Hayano, K. Edalati, K. Saito, Q. Guo, and Z. Horita: Appl. Phys. Lett., 2012, vol. 101, pp. 121908 1-4.10.1063/1.4754574 ↗
25. Y.Ikoma, K.Hayano, K.Edalati, K.Saito, Q.Guo, Z.Horita, T.Aoki and D.J.Smith: J. Mater. Sci., 2014, vol. 49, pp. 6565–6569.10.1007/s10853-014-8250-z ↗
26. Y. Ikoma, Y. Ejiri, K. Hayano, K. Saito, Q. Guo and Z. Horita: Phil. Mag. Lett., 2014, vol. 94, pp. 1-8.10.1080/09500839.2013.852265 ↗
27. K. Edalati and Z. Horita: Scripta Mater., 2010, vol. 63,pp. 174–177.10.1016/j.scriptamat.2010.03.048 ↗
28. K. Edalati, S. Toh, Y. Ikoma and Z. Horita: Scripta Mater., 2011, vol. 65, pp. 974-977.10.1016/j.scriptamat.2011.08.024 ↗
29. S. Erbel: Met. Technol., 1979, vol. 6, pp. 482-486.10.1179/030716979803276363 ↗
30. I. Saunders and J. Nutting: Met. Sci., 1984, vol. 18, pp. 571-575.10.1179/030634584790419629 ↗
31. Y. Harai, Y.Ito and Z. Horita: Scripta Mater., 2008, vol. 58, pp. 469-482.10.1016/j.scriptamat.2007.10.037 ↗
32. K. Edalati and Z. Horita: J. Mater. Sci., 2010, vol. 45, pp. 4578-4582.10.1007/s10853-010-4381-z ↗
33. K. Edalati and Z. Horita: J. Mater. Sci., 2012, vol. 47, pp. 473-478.10.1007/s10853-011-5822-z ↗
34. T. Fujioka and Z. Horita, Mater. Trans., 2009, vol. 50, pp. 930-933.10.2320/matertrans.MRP2008445 ↗
35. T. Masuda, K. Fujimitsu, Y. Takizawa, and Z. Horita: Lett. Mater., 2015, vol. 5, pp. 258-263.10.22226/2410-3535-2015-3-258-263 ↗
36. Y. Harai, M. Kai, K. Kaneko, Z. Horita and T. G. Langdon: Mater. Trans., 2008, vol. 49, pp. 76-83.10.2320/matertrans.ME200718 ↗
37. S. Komura, Z. Horita, M. Furukawa, M. Nemoto and T.G. Langdon: Metall. Mater. Trans. A, 2001, vol. 32, pp. 707-716.
38. Y. Harai, K. Edalati, Z. Horita and T. G. Langdon: Acta Mater., 2009, vol. 57, pp. 1147-1153.10.1016/j.actamat.2008.10.046 ↗
39. A. Alhamidi and Z. Horita: Mater. Sci. Eng. A, 2015, vol. 622, pp. 139-145.10.1016/j.msea.2014.11.009 ↗
40. S. Lee, K. Tazoe, I. F. Mohamed and Z. Horita: Mater. Sci. Eng. A, 2015, vol. 628, pp. 56-61.10.1016/j.msea.2015.01.026 ↗
41. M. Ashida, P. Chen, H. Doi, Y. Tsutsumi, T. Hanawa and Z. Horita: Mater. Sci. Eng. A, 2015, vol. 640, pp. 449-453.10.1016/j.msea.2015.06.020 ↗
42. Y. Takizawa, K. Otsuka, T. Masuda, T. Kajita, M. Yumoto, Y. Otagiri and Z. Horita: Mater. Sci. Eng. A, 2015, vol. 648, pp. 178-182.10.1016/j.msea.2015.09.023 ↗