Effect of Homogenization and Aging Treatment on Mechanical Properties and Stress-Corrosion Cracking of 7050 Alloys
Source abstract
Abstract
The effect of homogenization and aging treatments on the strength and the stress-corrosion-cracking (SCC) resistance of the 7050 aluminum alloy has been investigated and compared with those of the same-series 7075 alloy. The recrystallized structure and the quench sensitivity are found to be significantly affected by the dispersoid distribution, depending on the homogenization conditions. The finest and densest dispersoid distribution, generated by the step-homogenization (Step-H) treatment, can effectively inhibit recrystallization to obtain the smallest fraction of recrystallized structure. Such a characteristic lowers considerably the quench sensitivity of the 7050 alloy, but it produces the reverse in the 7075 alloy. For the 7050 alloy, Step-H always exhibits the highest strength among all the aging conditions, and the proposed step-quench and aging (SQA) treatment is confirmed to achieve an optimum strength and coarsened and wide-spaced grain-boundary precipitates (GBP), which have been found to improve the resistance of the SCC by the slow-strain-rate test (SSRT). Therefore, the attainment of both optimum strength and SCC resistance is possible for the 7050 alloy via the Step-H and SQA treatment. However, such treatment is not applicable to the 7075 alloy because of its inborn high quench sensitivity.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (29)
Show source-provided references
1. M.O. Speidel: Metall. Trans. A, 1975, vol. 6A, pp. 631–4210.1007/BF02672284 ↗
2. W. Gruhl: Z. Metallkd., 1984, vol. 75, pp. 819–26
3. B.M. Cina: United States Patent No. 3856584, Dec. 24, 1974.
4. M. Talianker, B. Cina: Metall. Trans. A, 1989, vol. 20A, pp. 2087–9210.1007/BF02650294 ↗
5. W. Wallace, J.C. Beddoes, M.C. deMalherbe: Can. Aeronaut. Space J., 1981, vol. 27(3), pp. 222–32
6. K. Rajan, W. Wallace, J.C. Beddoes: J. Mater. Sci., 1982, vol. 17, pp. 2817–2410.1007/BF00644656 ↗
7. N.C. Danh, K. Rajan, W. Wallace: Metall. Trans. A, 1983, vol. 14A, pp. 1843–5010.1007/BF02645554 ↗
8. K. Kazuhiko Asano, Ken-Ichi Hirano: Trans. JIM, 1989, vol. 9, pp. 24–3410.2320/matertrans1960.9.24 ↗
9. T.H. Sanders Jr., E.A. Starke Jr.: Metall. Trans. A, 1979, vol. 7A, pp. 1407–12
10. J.K. Park: Mater. Sci. Eng., 1988, vol. A103, pp. 223–3110.1016/0025-5416(88)90512-5 ↗
11. L. Christodoulou, H.M. Flower: Acta Metall., 1980, vol. 28, pp. 481–8710.1016/0001-6160(80)90138-8 ↗
12. P.N. Adler, R. DeIASI, G. Geschwind: Metall. Trans., 1972, vol. 3, pp. 3191–320010.1007/BF02661333 ↗
13. P.K. Poulose, J.E. Morral, A.J. McEvily: Metall. Trans., 1974, vol. 5, pp. 1393–140010.1007/BF02646625 ↗
14. M.S. Rahman, I. Polmear: Z. Metallkd., 1982, vol. 73, pp. 589–93
15. J.A.S. Green, W.G. Montague: Corr.-NACE, 1975, vol. 31, pp. 209–1310.5006/0010-9312-31.6.209 ↗
16. A.J. De Ardo Jr., R.D. Townsend: Metall. Trans.,1970, vol. 1, pp. 2573–8110.1007/BF03038387 ↗
17. P. Doig, J.W. Edington: Corr.-NACE, 1975, vol. 31, pp. 347–5210.5006/0010-9312-31.10.347 ↗
18. A.J. Cornish, M.K.B. Day: J. Inst. Met., 1971, vol. 99, pp. 377–84
19. K.G. Kent: J. Inst. Met., 1969, vol. 97, pp. 127–28
20. I.J. Polmear: Light Alloys, 2nd ed., Edward Arnold, London, 1989, pp. 54–68
21. G. Itoh, H. Saitoh, B.-L. Ou, H. Suzuki: J. Jpn. Inst. Light Met., 1986, vol. 36, pp. 485–9010.2464/jilm.36.485 ↗
22. D. Nguyen, A.W. Thompson, I.M. Bernstein: Acta Metall., 1987, vol. 35, pp. 2417–2510.1016/0001-6160(87)90139-8 ↗
23. S.P. Lynch: Mater. Sci. Forum, 1986, vol. 46, pp. 1–2410.4028/www.scientific.net/MSF.46.1 ↗
24. G.M. Scamans: J. Mater. Sci., 1978, vol. 13, pp. 27–3610.1007/BF00739268 ↗
25. R.D. Doherty: Mater. Sci., 1982, vol. 16, pp. 1–13
26. D.A. Porter, K.E. Easterling: Phase Transformations in Metals and Alloys, Chapman & Hall, London, 1993, pp. 314–17
27. Motohiro Kanno, Bin-Lung Ou: Mater. Trans., JIM, 1991, vol. 32, pp. 445–5010.2320/matertrans1989.32.445 ↗
28. M. Conserva, E. Di Russo, O. Caloni: Metall. Trans., 1971, vol. 2, pp. 1227–3210.1007/BF02664256 ↗
29. D.J. Lloyd, M.C. Chaturvedi: J. Mater. Sci., 1982, vol. 17, pp. 1819–2410.1007/BF00540811 ↗