Hydrogen diffusion coefficients in the titanium alloys IMI 834, Ti 10-2-3, Ti 21 S, and alloy C
Source abstract
Abstract
The diffusion coefficients of hydrogen were determined for three beta titanium alloys, which differ in the stability of the beta phase, and, for comparison, for one near-alpha titanium alloy in the temperature range from 40 °C to 500 °C. For this purpose, a step hydrogen concentration profile was produced by charging one side of rods of these materials with hydrogen by means of an electrochemical technique. After subsequent diffusion annealing, the hydrogen concentration profiles were determined analyzing small discs cut from these rods. The corresponding diffusion coefficient was calculated by adapting its value in such a way that a numerical diffusion simulation yields the experimentally determined profile. In all cases studied, the hydrogen diffusion coefficient was found to be independent of the hydrogen concentration and showed an Arrhenius-type temperature dependence. Hydrogen diffusion in alpha titanium was slower as compared to the beta titanium alloys under investigation. Furthermore, the diffusion coefficient of the metastable beta titianium alloys is only slightly affected by the prior heat treatment that determines the morphology and volume fraction of the precipitated alpha phase.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Hydrogen embrittlement and corrosion behaviors in metals · Nuclear Materials and Properties · Titanium Alloys Microstructure and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (37)
Show source-provided references
1. T.W. Duerig and J.C. Williams: in Beta Titanium Alloys in the 80’s, R.R. Boyer and H.W. Rosenburg, eds., TMS-AIME, Warrendale, PA, 1984, pp. 19–67.
2. M. Peters: Metallwissenschaft Technik, 1988, vol. 42, pp. 576–81.
3. P.J. Bania: in Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 3–14.
4. U. Zwicker: Titan und Titanlegierungen, Springer-Verlag, Berlin, 1974.10.1007/978-3-642-80587-5 ↗
5. N.E. Paton and J.C. Williams: in Hydrogen in Metals, I.M. Bernstein and A.W. Thompson, eds., ASM, Metals Park, OH, 1974, p. 409.
6. D.S. Shih, I.M. Robertson, and H.K. Birnbaum: Acta Metall., 1988, vol. 36, pp. 111–24.10.1016/0001-6160(88)90032-6 ↗
7. J.E. Costa, D. Banerjee, and J.C. Williams: in Beta Titanium Alloys in the 80’s, R.R. Boyer and H.W. Rosenberg, eds., TMS-AIME, Warrendale, PA, 1984, pp. 69–84.
8. A. San-Martin and F.D. Manchester: in Binary Alloy Phase Diagrams, 2nd ed., T.B. Massalski, ed., ASM, Metals Park, OH, 1987, pp. 1283–84.
9. H. Wipf: in Hydrogen in Metals Ill, H. Wipf, ed., Springer-Verlag, New York, NY, 1997, pp. 51–91.10.1007/BFb0103401 ↗
10. W.R. Holman, R.W. Crawford, and F. Paredes Jr.: Trans. AIME, 1965, vol. 233, pp. 1836–39.
11. R.L. Schulte and P.N. Adler: Trans. TMS-AIME, 1980, vol. 32, pp. 177–86.
12. J.D. Fast: Gases in Metals, The Macmillan Press Ltd., London, 1976, pp. 120–33.
13. J. Völkl and G. Alefeld: in Diffusion in Solids—Recent Developments, A.S. Nowick, J.J. Burton, eds., Academic Press, New York, NY, 1975, pp. 231–301.10.1016/B978-0-12-522660-8.50010-6 ↗
14. R.J. Borg and G.J. Dienes: Solid State Diffusion, Academic Press, Inc., New York, NY, 1988.
15. B.G. Pound: Acta Mater., 1997, vol. 45, pp. 2059–68.10.1016/S1359-6454(96)00296-0 ↗
16. B.G. Pound: Acta Metall. Mater., 1994, vol. 42, pp. 1551–59.10.1016/0956-7151(94)90365-4 ↗
17. G.A. Young, Jr. and J.R. Scully: Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 147–58.
18. L.M. Young, G.A. Young, Jr., J.R. Scully, and R.P. Gangloff: Metall. Mater. Trans. A, 1995, vol. 26A, pp. 1257–72.10.1007/BF02670620 ↗
19. S.N. Sankaran and R.K. Herrmann: Scripta Metall. Mater., 1993, vol. 29, pp. 1247–52.10.1016/0956-716X(93)90117-B ↗
20. S.N. Sankaran and R.K. Herrmann: in Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 137–45.
21. G.W. Kuhlman: Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 485–512.
22. R.W. Schutz: in Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 75–91.
23. H.-J. Christ and B. Ilschner: Scripta Metall., 1983, vol. 17, pp. 631–34.10.1016/0036-9748(83)90391-5 ↗
24. K. Prüßner, M. Decker, and H.-J. Christ: Proc. EUROMAT 99, Munich, Germany, Sept. 27–30, 1999, in press.
25. R.J. Wasilewski and G.L. Kehl: Metallurgia, 1954, vol. 50, pp. 225–30.
26. B.A. Kolachev, O.P. Nazimov, and L.N. Zhuravlev: Izv. Vyssh. Ucheb. Zaved: Tsvet. Met., 1969, vol. 12, p. 104.
27. T.P. Papazoglou and M.T. Hepworth: Trans. TMS-AIME, 1968, vol. 242, p. 682.
28. H. Kusamichi, Y. Yagi, T. Yukawa, and T. Noda: J. Jpn. Inst. Met., 1956, vol. 20, p. 39.10.2320/jinstmet1952.20.1_39 ↗
29. W.M. Albrecht and M.W. Mallett: Trans. TMS-AIME, 1958, vol. 212, pp. 204.
30. M. Someno, K. Nagasaki, and S. Kagaku: Vacuum Chem. (Tokyo), 1960, vol. 8, p. 145.
31. D.N. Kazakov, V.M. Khokhrin, L.L. Kunin, P.I. Ozhegov, and Y.A. Priselkov: Zavodskaya Lab., 1970, vol. 4, p. 441.
32. D.L. Johnson and H.G. Nelson: Metall. Trans., 1973, vol. 4, pp. 569–73.10.1007/BF02648711 ↗
33. A.M. Sukhotin, E.I. Antonovskaya, E.V. Sgibnev, I.I. Kornilov, T.T. Nartova, T.V. Mogutova, and A.K. Shul’man: Zashchita Metallov., 1975, vol. 11, p. 430.
34. O.P. Nazimov and L.N. Zhuravlev: Izv. Vyssh. Ucheb. Zaved: Tsvet. Met., 1976, vol. 19, p. 160.
35. T. Lin, H. Zhang, W. Wong, and N. Pan: Scripta Metall., 1989, vol. 23, p. 891.10.1016/0036-9748(89)90266-4 ↗
36. R.J. Lederich, D.S. Schwartz, and S.M.L. Sastry: Beta Titanium Alloys in the 1990’s, D. Eylon, R.R. Boyer, and D.A. Koss, eds., TMS, Warrendale, PA, 1993, pp. 159–69.
37. J. Crank: The Mathematics of Diffusion, Oxford University Press, Oxford, United Kingdom, 1975, p. 270.