The effect of cold deformation on the kinetics of the β″ precipitates in an Al-Mg-Si alloy
Source abstract
Abstract
Kinetics of β″ precipitation in an Al-0.55 pct Mg-1.1 wt pct Si (AA6022) in both deformed and undeformed conditions were investigated by means of differential scanning calorimetry (DSC). Transmission electron microscopy (TEM) analysis on predeformed samples was also performed to study the effect of deformation on β″ precipitates. It was found that the introduction of dislocations changes the precipitate type from β″ to β′ and Q′. Also the measured activation energy for precipitate formation in the case of predeformed and undeformed samples was compared. The results show that dislocations facilitate precipitation by decreasing the activation energy.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Aluminum Alloy Microstructure Properties · Microstructure and mechanical properties · Magnesium Alloys: Properties and Applications
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (30)
Show source-provided references
1. W.F. Miao and D.E. Laughlin: Metall. Mater. Trans. A, 2000, vol. 31A, pp. 361–71.10.1007/s11661-000-0272-2 ↗
2. A.K. Gupta and D.J. Lloyd: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 879–84.10.1007/s11661-999-0081-1 ↗
3. M. Murayama and K. Hono: Acta Mater., 1999, vol. 47, pp. 1537–48.10.1016/S1359-6454(99)00033-6 ↗
4. G.A. Edwards, K. Stiller, G.L. Dunlop, and M.J. Couper: Acta Mater., 1998, vol. 46, pp. 3893–3904.10.1016/S1359-6454(98)00059-7 ↗
5. I. Dutta and S.M. Allen: J. Mater. Sci. Lett., 1991, vol. 10, p. 323.10.1007/BF00719697 ↗
6. S.J. Andersen, H.W. Zandbergen, J. Jansen, C. TrÆholt, U. Tundal, and O. Reiso: Acta Mater., 1998, vol. 46, pp. 3283–89.10.1016/S1359-6454(97)00493-X ↗
7. K. Matsuda, S. Tada, and S. Ikeno: Proc. 4th Int. Conf. on Aluminum Alloys, T.H. Sanders and E.A. Starke, eds., Georgia Institute of Technology, Atlanta, GA, 1994, pp. 605–10.
8. K. Matsuda, T. Naoi, Y. Uetani, T. Sato, A. Kamio, and S. Ikeno: Scripta Mater., 1999, vol. 41, pp. 379–83.10.1016/S1359-6462(99)00169-4 ↗
9. D.J. Chakrabarti and D.E. Laughlin: Progr. Mater. Sci., 2004, vol. 49, pp. 389–410.10.1016/S0079-6425(03)00031-8 ↗
10. G. Phragmen: J. Inst. Met., 1950, vol. 77, p. 489.
11. L. Arnberg and B. Aurivillius: Acta Chem. Scand. Ser. A, 1980, vol. 34A, pp. 1–5.10.3891/acta.chem.scand.34a-0001 ↗
12. C. Wolverton: Acta Mater., 2001, vol. 49, pp. 3129–42.10.1016/S1359-6454(01)00229-4 ↗
13. L. Sagalowicz, G. Hug, D. Bechet, P. Sainfort, and G. Lapasset: Int. Conf of Al Alloys 4, Trans Tech Publications, Aedermannsdorf, Switzerland, 1994, pp. 636–43.
14. C. Cayron, L. Sagalowicz, O. Beffort, and P.A. Buffat: Phil Mag., 1999, vol. 79, pp. 2833–51.10.1080/014186199251364 ↗
15. D.C. Long, Y. Ohmori, and K. Nakai: Mater. Trans. JIM, 2000, vol. 41, pp. 690–95.10.2320/matertrans1989.41.690 ↗
16. J.Y Yao, D.A. Graham, and M.J. Couper: Aluminum Alloys: Their Physical and Mechanical Properties, Proc. 7th Int. Conf. on Aluminum Alloys, E.A. Starke, T.H. Sanders, and W.A. Cassada, eds., Charlottesville, VA, 2000, pp. 1083–88.
17. J. Dutkiewicz and L. Litynska: Mater. Sci. Eng., 2002, vol. A324, pp. 239–43.10.1016/S0921-5093(01)01318-1 ↗
18. K. Matsuda, M. Terasaki, S. Tada, and S. Ikeno: J. Jpn. Inst. Light Met., 1995, vol. 45, pp. 95–100.10.2464/jilm.45.95 ↗
19. K. Matsuda, S. Shimizu, H. Gamada, Y. Uetani, F. Shinagawa, and S. Ikeno: J. Soc. Mater. Sci. Jpn., 1999, vol. 48, pp. 10–15.10.2472/jsms.48.10 ↗
20. D.E. Laughlin and W.F. Miao: Automotive Alloys II, S.K. Das, ed., TMS, Warrendale, PA, 1998, pp. 63–79.
21. W.F. Miao and D.E. Laughlin: Scripta Mater., 1999, vol. 40, pp. 873–78.10.1016/S1359-6462(99)00046-9 ↗
22. J.D. Bryant: Metal. Mater. Trans. A, 1999, vol. 30A, pp. 1999–2006.10.1007/s11661-999-0010-3 ↗
23. A.K. Jena, A.K. Gupta, and M.C. Chatuvedi: Acta Metall., 1989, vol. 37, pp. 885–95.10.1016/0001-6160(89)90015-1 ↗
24. L.C. Doan, Y. Ohmori, and K. Nakai: Mater. Trans. JIM, 2000, vol. 41, pp. 300–05.10.2320/matertrans1989.41.300 ↗
25. A.K. Gupta, P.H. Marois, and D.J. Lloyd: Mater. Sci. Forum, 1996, vols. 217–222, pp. 801–08.10.4028/www.scientific.net/MSF.217-222.801 ↗
26. D.J. Lloyd, D.R. Evans, and A.K. Gupta: Metall. Mater. Trans. A, 1999, vol. 30A, pp. 879–84.
27. A.K. Gupta, D.J. Lloyd, and S.A. Court: Mater. Sci. Eng. A, 2001, vol. 301, pp. 140–46.10.1016/S0921-5093(00)01814-1 ↗
28. N.N. Buinov and V.P. Sauinyk: Dokl. Akad. Nauk S.S.S.R., 1953, vol. 88, pp. 257–59.
29. T. Hirata and S. Matsuo: Trans. JIM, 1973, vol. 15, pp. 1–7.
30. S.P. Chen, N.C.W. Kuijpers, and V.D. Zwaag: Mater. Sci. Eng. A, 2003, vol. 341, pp. 296–306.10.1016/S0921-5093(02)00245-9 ↗