Dislocation Nucleation and Source Activation during Nanoindentation Yield Points
Source abstract
Abstract
The onset of plasticity during nanoindentation of a tungsten single crystal was examined as a function of pre-existing dislocation density. Vickers indentations were used to generate a spatially varying dislocation density, and nanoindentation was then carried out at regions of high and low dislocation densities. Even with dislocation densities as high as 1.8 × 1013 m−2, a sharp elastic-plastic transition was observed during some indentations. At lower dislocation densities, 3.5 × 109 m−2, the shear stress at the elastic plastic transition increased and approached the theoretical shear stress of the crystal. A first-order model that predicts the load required for the onset of plasticity during nanoindentation from the activation of a dislocation source within a critical volume of material, rather than homogeneous dislocation nucleation, is developed. The model correlates well with experimentally measured loads at the onset of plasticity for dislocation densities of 1012 m−2 and higher for these nanoindentation conditions.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Metal and Thin Film Mechanics · Advanced materials and composites · Microstructure and mechanical properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (23)
Show source-provided references
1. N. Gane, F.P. Bowden: J. Appl. Phys., 1967, vol. 39, pp.1432–3510.1063/1.1656376 ↗
2. J. Pethica, D. Tabor: Surf. Sci., 1979, vol. 89, pp. 182–9010.1016/0039-6028(79)90606-X ↗
3. A.B. Mann, J.B. Pethica: Appl. Phys. Lett., 1996, vol. 69, pp. 907–0910.1063/1.116939 ↗
4. W.W. Gerberich, J.C. Nelson, E.E. Lilleodden, P. Anderson, J.T. Wyrobek: Acta Mater., 1996, vol. 44, pp. 3585–9810.1016/1359-6454(96)00010-9 ↗
5. S.A. Syed-Asif, J.B. Pethica: Phil. Mag. A, 1997, vol. 76, pp. 1105–1810.1080/01418619708214217 ↗
6. D.F. Bahr, D.E. Kramer, W.W. Gerberich: Acta Mater., 1998, vol. 46, pp. 3605–1710.1016/S1359-6454(98)00024-X ↗
7. Y. Chiu and A. Ngan: Acta Mater., 2002, vol. 50, 1599–1110.1016/S1359-6454(02)00025-3 ↗
8. J. Bradby, J. William, M. Swain: J. Mater. Res., 2003, vol. 19, pp. 380–8610.1557/jmr.2004.19.1.380 ↗
9. C.A. Schuh: Nat. Mater., 2005, vol. 4, pp. 617–2210.1038/nmat1429 ↗
10. C.L. Kelchner, S.J. Plimpton, J.C. Hamilton: Phys. Rev. B, 1998, vol. 58, pp. 11085–1108810.1103/PhysRevB.58.11085 ↗
11. D. Rodriquez-Marek, M. Pang, D.F. Bahr: Metall. Mater. Trans. A, 2003, vol. 34A, 1291–9610.1007/s11661-003-0240-8 ↗
12. M. Pang, D.F. Bahr: J. Mater. Res., 2001, vol. 16, pp. 2634–4310.1557/JMR.2001.0362 ↗
13. E. Weppelmann, M.V. Swain: Thin Solid Films, 1996, vol. 286, pp. 111–2110.1016/S0040-6090(95)08525-4 ↗
14. S.V. Hainsworth, M.R. McGurk, T.F. Page: Surf. Coat. Technol., 1998, vol. 102, pp. 97–10710.1016/S0257-8972(97)00683-X ↗
15. D.E. Kramer, K.B. Yoder, W.W. Gerberich: Phil. Mag. A, 2001, vol. 81, pp. 2033–5810.1080/01418610108216651 ↗
16. G.F. Vander Voort: Metallography Principles and Practice, McGraw-Hill, New York, NY, 1984, pp. 599 and 69710.31399/asm.tb.mpp.9781627082600 ↗
17. Y. Shibutani, A. Koyama: J. Mater. Res., 2003, vol. 19, pp. 183–8810.1557/jmr.2004.19.1.183 ↗
18. S. Amelinckx: Phil. Mag., 1956, vol. 1, pp. 269–9010.1080/14786435608238101 ↗
19. K.L. Johnson: Contact Mechanics, Cambridge University Press, New York, NY, 1985, pp. 90–10410.1017/CBO9781139171731 ↗
20. N. Stelmashenko, M.G. Walls, L.M. Brown, and Yu.V. Milman: Acta Metall. Mater., 1993, vol. 46, pp. 2855–6510.1016/0956-7151(93)90100-7 ↗
21. T. Michalske and J.E. Houston: Acta Mater., 1998, vol. 46, pp. 391–9610.1016/S1359-6454(97)00270-X ↗
22. D.F. Bahr, D.E. Wilson, D.A. Crowson: J. Mater. Res., 1999, vol. 14, pp. 2269–7510.1557/JMR.1999.0303 ↗
23. J.G. Swadener, B. Taljit, G.M. Pharr: J. Mater. Res., 2001, vol. 16, pp. 2091–210210.1557/JMR.2001.0286 ↗