journal article·2013-12Open access

Dendritic Growth Morphologies in Al-Zn Alloys—Part I: X-ray Tomographic Microscopy

JONATHAN Friedli, J. L. Fife, P. Di Napoli, M. Rappaz

Abstract

Upon solidification, most metallic alloys form dendritic structures that grow along directions corresponding to low index crystal axes, e.g., \(\langle100\rangle\) directions in fcc aluminum. However, recent findings[1,2] have shown that an increase in the zinc content in Al-Zn alloys continuously changes the dendrite growth direction from \(\langle100\rangle\) to \(\langle110\rangle\) in {100} planes. At intermediate compositions, between 25 wt pct and 55 wt pct Zn, \(\langle320\rangle\) dendrites and textured seaweeds were reported. The reason for this dendrite orientation transition is that this system exhibits a large solubility of zinc, a hexagonal metal, in the primary fcc aluminum phase, thus modifying its weak solid–liquid interfacial energy anisotropy. Owing to the complexity of the phenomenology, there is still no satisfactory theory that predicts all the observed microstructures. The current study is thus aimed at better understanding the formation of these structures. This is provided by the access to their 3D morphologies via synchrotron-based X-ray tomographic microscopy of quenched Bridgman solidified specimens in combination with the determination of the crystal orientation of the dendrites by electron-backscattered diffraction. Most interestingly, all alloys with intermediate compositions were shown to grow as seaweeds, constrained to grow mostly in a (001) symmetry plane, by an alternating growth direction mechanism. Thus, these structures are far from random and are considered less hierarchically ordered than common dendrites.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Aluminum Alloy Microstructure Properties · Solidification and crystal growth phenomena · Microstructure and mechanical properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (23)

Show source-provided references
1. F. Gonzales and M. Rappaz: Metall. Mater. Trans. A, 2006, vol. 37, pp. 2797–2806.10.1007/BF02586112 ↗
2. F. Gonzales and M. Rappaz: Metall. Mater. Trans. A, 2008, vol. 39, pp. 2148–60.10.1007/s11661-008-9546-x ↗
3. S. Liu, R.E. Napolitano, and R. Trivedi: Acta. Mater., vol. 49, pp. 4271–76.10.1016/S1359-6454(01)00306-8 ↗
4. S. Henry, T. Minghetti, and M. Rappaz: Acta. Mater., 1998, vol. 46, pp. 6431–43.10.1016/S1359-6454(98)00308-5 ↗
5. A. Semoroz, Y. Durandet, and M. Rappaz: Acta. Mater., 2001, vol. 49, pp. 529–41.10.1016/S1359-6454(00)00322-0 ↗
6. T. Haxhimali, A. Karma, F. Gonzales, and M. Rappaz: Nat. Mater., 2006, vol. 5, pp. 660–64.10.1038/nmat1693 ↗
7. E. Brener, H. Müller-Krumbhaar, and D. Temkin: Phys. Rev. E, 1996, vol. 54, pp. 2714–22.10.1103/PhysRevE.54.2714 ↗
8. E. Brener, T. Ihle, H. Müller-Krumbhaar, Y. Saito, and K. Shiraishi: Physica A, 1994, vol. 204, pp. 96–110.10.1016/0378-4371(94)90420-0 ↗
9. H. Emmerich, D. Schleussner, T. Ihle, and K. Kassner: J. Phys., 1999, vol. 11, pp. 8981–93.
10. S. Akamatsu, G. Faivre, T. Ihle: Phys. Rev. E, 1995, vol. 51, pp. 4751–80.10.1103/PhysRevE.51.4751 ↗
11. S. Akamatsu and G. Faivre G.: Phys. Rev. E, 1998, vol. 58, pp. 3302–15.10.1103/PhysRevE.58.3302 ↗
12. A.M. Mullis, K.I. Dragnevski, and R.F. Cochrane: Mater. Sci. Eng. A, 2004, vol. 375–377, pp. 157–62.10.1016/j.msea.2003.10.139 ↗
13. H. Assadi, M. Oghabi, D.M. Herlach: Acta. Mater., 2009, vol. 57, pp. 1639–47.10.1016/j.actamat.2008.12.004 ↗
14. F. Gonzales. Ph.D. Thesis, Ecole Polytechnique Fédérale de Lausanne (2009).
15. J.A. Dantzig, P. Di Napoli, J. Friedli, and M. Rappaz: Metall. Mater. Trans. A, 2013. DOI: 10.1007/s11661-013-1911-8.10.1007/s11661-013-1911-8 ↗
16. M. Stampanoni, A. Groso, A. Isenegger, G. Mikuljan, Q. Chen, A. Bertrand, S. Henein, R. Betemps, U. Frommherz, P. Böhler, D. Meister, M. Lange, and R. Abela: in Proc SPIE 6318 U. Bonse, ed., 2006, 63180M.
17. C. Hintermüller, F. Marone, A. Isenegger, and M. Stampanoni: J. Synchrotron. Radiat., 2010, vol. 17, pp. 550–59.10.1107/S0909049510011830 ↗
18. F. Marone and M. Stampanoni: J. Synchrotron. Radiat., 2012, vol. 19, pp. 1029–37.10.1107/S0909049512032864 ↗
19. M.E. Glicksman: Mater. Sci. Eng., 1984, vol. 65, pp. 45–55.10.1016/0025-5416(84)90198-8 ↗
20. M. Rappaz and E. Blank: J. Cryst. Growth, 1986, vol. 74, pp. 67–76.10.1016/0022-0248(86)90249-6 ↗
21. M.E. Glicksman and N.B. Singh: J. Cryst. Growth, 1989, vol. 98, pp. 277–84.10.1016/0022-0248(89)90142-5 ↗
22. J. Friedli, J. Fife, P. Di Napoli, and M. Rappaz: in Proc MCWASP A. Ludwig, ed., 2012.
23. J. Fife, M. Rappaz, M. Pistone, T. Celcer, G. Mikuljan, and M. Stampanoni: J. Synchrotron. Radiat., 2012, vol. 19, pp. 352–58.10.1107/S0909049512003287 ↗