High-Temperature Behavior of a High-Velocity Oxy-Fuel Sprayed Cr3C2-NiCr Coating
Source abstract
Abstract
High-velocity oxy-fuel (HVOF) sprayed coatings have the potential to enhance the high-temperature oxidation, corrosion, and erosion-corrosion resistance of boiler steels. In the current work, 75 pct chromium carbide-25 pct (nickel-20 pct chromium) [Cr3C2-NiCr] coating was deposited on ASTM SA213-T22 boiler steel using the HVOF thermal spray process. High-temperature oxidation, hot corrosion, and erosion-corrosion behavior of the coated and bare steel was evaluated in the air, molten salt [Na2SO4-82 pct Fe2(SO4)3], and actual boiler environments under cyclic conditions. Weight-change measurements were taken at the end of each cycle. Efforts were made to formulate the kinetics of the oxidation, corrosion, and erosion-corrosion. X-ray diffraction (XRD) and field-emission scanning electron microscopy (FE-SEM)/energy dispersive spectroscopy (EDS) techniques were used to analyze the oxidation products. The coating was found to be intact and spallation free in all the environments of the study in general, whereas the bare steel suffered extensive spallation and a relatively higher rate of degradation. The coating was found to be useful to enhance the high-temperature resistance of the steel in all the three environments in this study.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High-Temperature Coating Behaviors · Advanced materials and composites · Metal Alloys Wear and Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (56)
Show source-provided references
1. V.H. Hidalgo, F.J.B. Varela, A.C. Menéndez, and S.P. Martí́nez: Tribol. Int., 2001, vol. 34, no. 3, pp. 161–69.10.1016/S0301-679X(00)00146-8 ↗
2. B.G. Seong, S.Y. Hwang, and K.Y. Kim: Surf. Coat. Technol., 2000, vol. 126, pp. 256–65.10.1016/S0257-8972(00)00523-5 ↗
3. M.G. Hocking: Surf. Coat. Technol., 1993, vol. 62, nos. 1–3, pp. 460–66.10.1016/0257-8972(93)90284-U ↗
4. P. Niranatlumpong, C.B. Ponton, and H.E. Evans: Oxid. Met., 2000, vol. 53, nos. 3–4, pp. 241–58.10.1023/A:1004549219013 ↗
5. J. Illavsky, J. Pisacka, P. Chraska, N. Margandant, S. Siegmann, W. Wagner, P. Fiala, and G. Barbezat: Proc. 1 st Int. Thermal Spray Conf., Montreal, Quebec, Canada, 2000, pp. 449–54.10.31399/asm.cp.itsc2000p0449 ↗
6. L. Jacobs, M.M. Hyland, and M. De Bonte: Therm. Spray Technol., 1998, vol. 7, no. 2, pp. 213–18.10.1361/105996398770350954 ↗
7. K.A. Khor and N.L. Leh: Proc. NTSC, 1993, p. 613.
8. T. Kinos: Proc. NTPC, 1994, p. 357.
9. S. Matthews, M. Hyland, and B. James: J. Thermal Spray Technol., 2004, vol. 13, no. 4, pp. 526–36.10.1361/10599630421442 ↗
10. J.M. Guilemany, N. Espallargas, P.H. Suegama, and A.V. Benedetti: Corr. Sci., 2006, vol. 48, pp. 2998–3013.10.1016/j.corsci.2005.10.016 ↗
11. H.S. Sidhu, B.S. Sidhu, and S. Prakash: J. Mater. Process. Technol., 2006, vol. 171, pp. 77–82.10.1016/j.jmatprotec.2005.06.058 ↗
12. J. Voyer and B.R. Marple: Surface Engineering via Applied Research, C.C. Berndt, ed., ASM International, Montreal, Quebec, Canada, 2000, pp. 895–904.10.31399/asm.cp.itsc2000p0895 ↗
13. M.H. Staia, T. Valente, C. Bartuli, D.B. Lewis, C.P. Constable, A. Roman, J. Lesage, D. Chicot, and G. Mesmacque: Surf. Coat. Technol., 2001, vols. 146–147, pp. 563–70.10.1016/S0257-8972(01)01438-4 ↗
14. D.Y. Kim and M.S. Han: Thermal Spray: Practical Solutions for Engineering Problems, C.C. Berndt, ed., ASM International, Materials Park, OH, 1996, pp. 123–28.10.31399/asm.cp.itsc1996p0123 ↗
15. B.Q. Wang: Surface Modifications Technologies XI, T.S. Sudarshan, ed., The Institute of Materials, Paris, France, 1997, pp. 458–67.
16. T. Sahraoui, N.E. Fenineche, G. Montavon, and C. Coddet: Mater. Des., 2003, vol. 24, pp. 309–13.10.1016/S0261-3069(03)00059-1 ↗
17. K. Satoshi, S. Yuji, Y. Akihiro, I. Akira, and O. Hiromu: Kawasaki Steel Giho, 1987, vol. 19, no. 1, pp. 64–71.
18. Y. Fukuda, H. Yamasaki, M. Kumonn, and K. Kawamura: Proc. ‘Attac’88, High Temperature Society of Japan, Osaka, Japan, 1988, pp. 49–54.
19. S. Loubiere, J.P. Bonino, C. Laurent, and A. Rousset: Mater. Res. Bull., 1995, vol. 30, no. 12, pp. 1455–1503.10.1016/0025-5408(95)00123-9 ↗
20. L. Beczkowiak, H. Keller, and G. Schwier: Carbide Materials for HVOF Applications - Powder and Coating Properties, H.C. Starck GmbH and Co., Berlin, Germany, 1999.
21. M. Liu: Thermal Spray: Meeting the Challenges of the 21 st Century, ASM International, Materials Park, OH, 1998.
22. S. Kamal, R. Jayaganthan, S. Prakash, and S. Kumar: J. Alloys Compd., 2008, vol. 463, nos. 1–2, pp. 358–72.10.1016/j.jallcom.2007.09.019 ↗
23. L.M. Berger, P. Vuoristo, T. Mantyla, and W. Gruner: Thermal Spray, Meeting the Challenges of the 21 st Century, C. Coddet, ed., ASM International, Materials Park, OH, 1998, pp. 75–82.10.31399/asm.cp.itsc1998p0075 ↗
24. M. Kaur, H. Singh, and S. Prakash: Surf. Coat. Technol., 2011, vol. 206, nos. 2–3, pp. 530–41.10.1016/j.surfcoat.2011.07.077 ↗
25. Y. Liu: J. Power Sources, 2008, vol. 179, pp. 286–91.10.1016/j.jpowsour.2007.12.067 ↗
26. C. Richard, J. Lu, J.F. Flavenot, G. Beranger, and F. Decops: Thermal Spray: International Advance in Coatings Technology, C.C. Berndt, ed., ASM International, Materials Park, OH, 1992, pp. 11–16.
27. Y.C. Kim, T. Terasaki, and T.H. North: Thermal Spray Coating: Properties, Process and Applications, T.F. Bernecki, ed., ASM International, Materials Park, OH, 1992, pp. 221–27.
28. H.S. Ahn and B.J. Roylance: Tribol. Int., 1992, vol. 25, no. 4, pp. 227–36.10.1016/0301-679X(92)90060-Z ↗
29. C.K. Lin, S.H. Leigh, and C.C. Berndt: Thermal Spraying: Current Status and Future Trends, High Temperature Society of Japan, A. Ohmori, ed., Osaka, Japan, 1995, pp. 903–08.
30. M. Roy, A. Pauschitz, J. Wernisch, and F. Franek: Wear, 2004, vol. 257, pp. 799–811.10.1016/j.wear.2004.05.001 ↗
31. G. Ji, C. Li, Y. Wang, and W. Li: Surf. Coat. Technol., 2006, vol. 200, pp. 6749–57.10.1016/j.surfcoat.2005.10.005 ↗
32. H.S. Sidhu, B.S. Sidhu, and S. Prakash: J. Mater. Proc. Technol., 2006, vol. 171, pp. 77–82.10.1016/j.jmatprotec.2005.06.058 ↗
33. J.K.N. Murthy, S. Bysakh, K. Gopinath, and B. Venkataraman: Surf. Coat. Technol., 2007, vol. 202, pp. 1–12.10.1016/j.surfcoat.2007.03.017 ↗
34. S. Matthews, B. James, and M. Hyland: Surf. Coat. Technol., 2009, vol. 203, pp. 1086–93.10.1016/j.surfcoat.2008.10.005 ↗
35. S. Matthews, M. Hyland, and B. James: J. Thermal Spray Technol., 2004, vol. 13, no. 4, pp. 526–36.10.1361/10599630421442 ↗
36. D.C. Crawmer, J.D. Krebsback, and W.L. Riggs: Proc. 13 th International Thermal Spraying Conference (ITSC), Orlando, FL, 1992, pp. 127–36.
37. L. Russo and M. Dorfmann: Thermal Spraying: Current Status and Future Trends, High Temperature Society of Japan, Osaka, Japan, 1995, p. 681.
38. C.J. Li, G.C. Ji, Y.Y. Wang, and K. Sonya: Thin Solid Films, 2002, vol. 419, pp. 137–43.10.1016/S0040-6090(02)00708-3 ↗
39. J.M. Guilemany, J.M. Miguel, S. Vizcaíno, C. Lorenzana, J. Delgado, and J. Sanchez: Surf. Coat. Technol., 2002, vol. 157, pp. 207–13.10.1016/S0257-8972(02)00148-2 ↗
40. S. Kamal, R. Jayaganthan, S. Prakash, and S. Kumar: J. Alloys Compd., 2009, vol. 472, nos. 1–2, pp. 378–89.10.1016/j.jallcom.2008.04.087 ↗
41. F.H. Stott: Mater. Charact., 1992, vol. 28, no. 3, pp. 311–25.10.1016/1044-5803(92)90019-E ↗
42. H. Singh, D. Puri, S. Prakash, and D.S. Hira: Mater. Sci. Technol., 2007, vol. 23, no. 6, pp. 736–44.10.1179/174328407X185785 ↗
43. D. Wang: Surf. Coat. Technol., 1988, vol. 36, pp. 49–60.10.1016/0257-8972(88)90135-1 ↗
44. B. Singh: Ph.D. Dissertation, Indian Institute of Technology, Roorkee, India, 2003.
45. G.Y. Lai: High Temperature Corrosion of Engineering Alloys, ASM International, Materials Park, OH, 1990, pp. 15–46.
46. S.R.J. Saunders and J.R. Nicholls: Mater. Sci. Technol., 1988, vol. 5, no. 19, pp. 780–98.
47. M. Mayuzumi, J. Ohta, and T. Arai: Corrosion, 1998, vol. 54, no. 4, pp. 271–80.10.5006/1.3284853 ↗
48. A.R. Nicoll and G. Wahl: Thin Solid Films, 1983, vol. 95, pp. 21–34.10.1016/0040-6090(82)90579-X ↗
49. D. Das, R. Balasubramaniam, and M.N. Mungole: J. Mater. Sci., 2002, vol. 37, no. 6, pp. 1135–42.10.1023/A:1014307219963 ↗
50. S.E. Sadique, A.H. Mollah, M.S. Islam, M.M. Ali, M.H.H. Megat, and S. Basri: Oxid. Met., 2000, vol. 54, nos. 5–6, pp. 385–400.10.1023/A:1004682316408 ↗
51. K. Sachs: Metallurgia, 1958, pp. 167–73.
52. F. Wang, X. Tian, Q. Li, L. Li, and X. Peng: Thin Solid Films, 2007, vol. 516, no. 16, pp. 5740–47.10.1016/j.tsf.2007.07.131 ↗
53. U.K. Chatterjee, S.K. Bose, and S.K. Roy: Environmental Degradation of Metals, Marcel Dekker, New York, NY, 2001.10.1201/9781482292244 ↗
54. A. deS. Brasunas: NACE Basic Corrosion Course, NACE, Houston, TX, 1977.
55. Y. Fukuda and M. Kumonn: Proc. ITSC-95, High Temperature Society of Japan, Kobe, Japan, 1995, pp. 107–11.
56. B.Q. Wang, G.Q. Geng, and A.V. Levy: Surf. Coat. Technol., 1992, vols. 54–55, pp. 529–35.10.1016/S0257-8972(07)80077-6 ↗