On the Eutectoid Reaction in a Quaternary Fe-C-Mn-Al Alloy: Austenite → Ferrite + Kappa-Carbide + M23C6 Carbide
Source abstract
Abstract
Lamellae of ferrite, kappa-carbide, and M23C6 carbide are involved in a eutectoid reaction of an Fe-C-Mn-Al alloy after isothermal holding at temperatures below 923 K (650 °C). These lamellar phases are product phases from the decomposition of austenite during the eutectoid reaction of the quaternary alloy, i.e., austenite → ferrite + kappa-carbide + M23C6 carbide. Since the Al concentration in the steel is higher than that of the eutectoid composition, proeutectoid ferrite and kappa-carbide appear in the austenite prior to the eutectoid reaction to reduce the Al content of the retained austenite. The retained austenite decomposes into ferrite, kappa-carbide, and M23C6 carbide during the eutectoid reaction.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Metal Alloys Wear and Properties · Metallurgical Processes and Thermodynamics
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (40)
Show source-provided references
1. R.W.K. Honeycombe, Steels-Microstructure and Properties, Edward Arnold, London, 1980.
2. P. Kolmskog, A. Borgenstam: Metall. Mater. Trans A, 2011, vol. 42A, pp. 3941-51.10.1007/s11661-011-0794-9 ↗
3. A. Borgenstam, P. Hedsrtom, M. Hillert, P. Kolmskog, A. Stormvinter, J. Agren: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1558-74.10.1007/s11661-010-0539-1 ↗
4. M. Hillert, L. Hoglund, J. Agren: Metall. Mater. Trans. A, 2004, vol. 35A, pp. 3693-700.10.1007/s11661-004-0275-5 ↗
5. G. Spanos, H.S. Fang, H.I. Aaronson: Metall. Trans. A, 1990, vol. 21A, pp. 1381-90.10.1007/BF02672558 ↗
6. W.C. Cheng, J. Chang: Mater. Charact. 2013, vol. 77, pp. 53-62.10.1016/j.matchar.2012.12.008 ↗
7. G.J. Shiflet, H.I. Aaronson, J.R. Bradley: Metall. Trans. A, 1981, vol. 12A, pp. 1743-50.10.1007/BF02643756 ↗
8. R.E. Hackenberg, G.J. Shiflet: Acta Mater., 2003, vol. 51, pp. 2131-47.10.1016/S1359-6454(02)00562-1 ↗
9. H.J. Lee, G. Spanos, G.J. Shiflet, H.I. Aaronson: Acta Metall., 1988, vol. 36, pp. 1129-40.10.1016/0001-6160(88)90166-6 ↗
10. F.N. Rhines: Phase Diagrams in Metallurgy, McGraw Hill, New York, 1956, pp. 159–272.
11. D.J.S. Cooksey, A. Hellawell: J. Inst. Met. (Lond.), 1967, vol. 95, pp. 183-87.
12. P.R. Howell, J.V. Bee, R.W.K. Honeycombe: Metall. Trans. A, 1979, vol. 10A, pp. 1213-22.10.1007/BF02811976 ↗
13. K. Campbell, R.W.K. Honeycombe: Met. Sci., 1974, vol. 8, pp. 197-203.10.1016/0036-9748(74)90238-5 ↗
14. W.C. Cheng, S.M. Hwang: Metall. Mater. Trans. A, 2011, vol. 42A, pp. 1760-66.10.1007/s11661-010-0597-4 ↗
15. W.C. Cheng, Y.C. Li: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1817-25.10.1007/s11661-011-1051-y ↗
16. C.R. Hutchinson, G.J. Shiflet: Scripta Mater., 2004, vol. 50, pp. 1-5.10.1016/j.scriptamat.2003.09.052 ↗
17. C.R. Hutchinson, R.E. Hackenberg, G.J. Shiflet: Acta Mater., 2004, vol. 52, pp. 3565-85.10.1016/j.actamat.2004.04.010 ↗
18. J.A. Jimenez, G. Frommeyer: J. Alloys Compd., 2011, vol. 509, pp. 2729-33.10.1016/j.jallcom.2010.12.017 ↗
19. A. Schneider, L. Falat, G. Sauthoff, G. Frommeyer: Intermetallics, 2005, vol. 13, pp. 1322-31.10.1016/j.intermet.2005.01.013 ↗
20. K.G. Chin, K.J. Lee, J.H. Kwak, J.Y. Kang, B.J Lee: J. Alloys Compd., 2010, vol. 505, pp. 217-23.10.1016/j.jallcom.2010.06.032 ↗
21. K.H. Han, J.C. Yoon, W.K. Choo: Scripta Metall., 1986, vol. 20, pp. 33-36.10.1016/0036-9748(86)90208-5 ↗
22. K.H. Han: Mater. Sci. Eng. A, 1995, vol. 197, pp. 223-29.10.1016/0921-5093(94)09728-3 ↗
23. K. Sato, K. Tagawa, Y. Inoue: Scripta Metall., 1988, vol. 22, pp. 899-902.10.1016/S0036-9748(88)80071-1 ↗
24. K. Sato, K. Tagawa, Y. Inoue: Mater. Sci. Eng. A, 1987, vol. 111, pp. 45-50.10.1016/0921-5093(89)90196-2 ↗
25. K. Sato, K. Tagawa, Y. Inoue: Metall. Trans. A, 1990, vol. 21A, pp. 5-11.10.1007/BF02656419 ↗
26. W.K. Choo, J.H. Kim, J.C. Yoon: Acta Mater., 1997, vol. 45(12), pp. 4877-85.10.1016/S1359-6454(97)00201-2 ↗
27. M.C. Li, H. Chand, P.W. Kao, D. Gan: Mater. Chem. Phys., 1999, vol.59, pp. 96-99.10.1016/S0254-0584(99)00026-7 ↗
28. C.S. Wang, C.N. Hwang, C.G. Chao, T.F. Liu: Scripta Mater., 2007, vol. 57, pp. 809-12.10.1016/j.scriptamat.2007.07.007 ↗
29. V. Rigaud, D. Daloz, J. Drillet, A. Perlade, P. Maugis, G. Lesoult: ISIJ Int., 2007, vol. 47(6), pp. 898-906.10.2355/isijinternational.47.898 ↗
30. H. Ishii, K. Ohkubo, S. Miura, T. Mohri: Mater. Trans., 2003, vol. 44(9), pp. 1679-81.10.2320/matertrans.44.1679 ↗
31. K. Ishida, H. Ohtani, N. Satoh, R. Kainuma, T. Nishizawa: ISIJ Int., 1990, vol. 30(8), pp. 680-86.10.2355/isijinternational.30.680 ↗
32. W.C. Cheng: Metall. Mater. Trans. A, 2005, vol. 36A, pp. 1737-43.10.1007/s11661-005-0038-y ↗
33. W.C. Cheng, H.Y. Lin: Mater. Sci. Eng. A, 2002, vol. A323, pp. 462-66.10.1016/S0921-5093(01)01498-8 ↗
34. W.C. Cheng, H.Y. Lin and C.F. Liu: Mater. Sci. Eng. A, 2002, vol. A335, pp. 82-88.10.1016/S0921-5093(01)01947-5 ↗
35. W.C. Cheng, C.F. Liu and Y.F. Lai: Mater. Sci. Eng. A, 2002, vol. A337, pp. 281-86.10.1016/S0921-5093(02)00047-3 ↗
36. W.C. Cheng, C.F. Liu and Y.F. Lai: Scripta Mater., 2003, vol. 48, pp. 295-300.10.1016/S1359-6462(02)00378-0 ↗
37. W.C. Cheng, C.K. Lai: Scripta Mater., 2006, vol. 55, pp. 783-86.10.1016/j.scriptamat.2006.07.023 ↗
38. V.K. Gorev, V.I. Gurinovich, V.F. Lisitsyn: Vest. Akad. Nauk BSSR Ser. Fiz. Tekh. 1990, vol. 4, pp. 24-26.
39. C.W. Bale, E. Bélisle, P. Chartrand, S.A. Decterov, G. Eriksson, K. Hack, I.H. Jung, Y.B. Kang, J. Melançon, A.D. Pelton, C. Robelin, S. Petersen: CALPHAD, 2009, vol. 33 (2), pp. 295-311.10.1016/j.calphad.2008.09.009 ↗
40. R.A. Ricks, S.A. Parsons, and P.R. Howell: Proc. Int. Conf. Solid-to Solid Phase Transformations, H.I. Aaronson et al., eds., TMS-AIME, New York, 1982, pp. 831–35.