An Investigation of High-Temperature Precipitation in Powder-Metallurgy, Gamma/Gamma-Prime Nickel-Base Superalloys
Source abstract
Abstract
The high-temperature-precipitation behavior of a typical powder-metallurgy, gamma-gamma-prime, nickel-base superalloy (LSHR) was determined and used to develop and validate a quantitative fast-acting model. To this end, a series of experiments comprising supersolvus solution treatment followed by continuous cooling at rates typical of those experienced during the manufacture of full-scale components was conducted for LSHR. The nucleation and growth of secondary-gamma-prime precipitates were deduced via metallography on samples water quenched at various temperatures during the cooling cycle. Further insight on nucleation and the extent of retained supersaturation during cooling was obtained from in situ synchrotron (X-ray diffraction) experiments involving cooling of LSHR samples at identical rates with or without a hold time at an intermediate temperature. The observations were interpreted using a fast-acting (spreadsheet) model which incorporated the important aspects of classical, homogeneous-nucleation theory and growth by bulk diffusion. In this regard, particular attention was paid to the determination of model input parameters such as the composition, free energy of formation, and surface energy of precipitates, and an effective diffusivity; the values so determined contrasted with those from existing thermodynamic and diffusion databases. It was demonstrated that fast-acting-model calculations based on a nickel-chromium pseudo-binary system gave good agreement with measurements of the evolution of precipitate volume fraction, number density, and size during continuous cooling.
Source: openaire · Quality: candidate unverified · Source record ↗
Research context
OpenAlex topics: High Temperature Alloys and Creep · Metallurgical Processes and Thermodynamics · Aluminum Alloy Microstructure Properties
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (65)
Show source-provided references
1. T.A. Parthasarathy, S.I. Rao, and D.M. Dimiduk: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 887–96.10.7449/2004/Superalloys_2004_887_896 ↗
2. R.W. Kozar, A. Suzuki, W.W. Milligan, J.J. Schirra, M.F. Savage, and T.M. Pollock: Metall. and Mater. Trans. A, 2009, vol. 40A, pp. 1588–603.10.1007/s11661-009-9858-5 ↗
3. D.M. Collins and H.J. Stone: Inter. J. Plasticity, 2014, vol. 54, pp. 96–112.10.1016/j.ijplas.2013.08.009 ↗
4. R.D. Doherty: in Physical Metallurgy, R.W. Cahn and P. Haasen, eds., North-Holland, Amsterdam, 1996, ch. 15.
5. J.W. Martin, R.D. Doherty, and B. Cantor: Stability of Microstructure in Metallic Systems, Cambridge University Press, Cambridge, UK, 1997.10.1017/CBO9780511623134 ↗
6. D. Turnbull: in Solid-State Physics, vol. 3, F. Seitz and D. Turnbull, eds., Academic Press, New York, pp. 226–306.
7. A. Kelly and R.B. Nicholson: Progress in Materials Sci., 1963, vol. 10, pp. 151–391.10.1016/0079-6425(63)90010-0 ↗
8. K.C. Russell: in Phase Transformations, ASM, Metals Park, OH, 1970, pp. 219–68.
9. J.W. Christian: The Theory of Transformations in Metals and Alloys, 2nd edn, Pergamon Press, Oxford, 1975.
10. K.C. Russell: Adv. Colloid Interface Sci., 1980, vol. 13, pp. 205–318.10.1016/0001-8686(80)80003-0 ↗
11. P. Haasen, V. Gerold, R. Wagner, and M.F. Ashby: Decomposition of Alloys: The Early Stages, Pergamon Press, Oxford, 1984.
12. H.I. Aaronson and F.K. LeGoues: Metall. Trans. A, 1992, vol. 23A, pp. 1915–45.10.1007/BF02647541 ↗
13. H.S. Carslaw and J.C. Jaeger: Conduction of Heat in Solids, Oxford University press, London, 1959.
14. H.B. Aaron, D. Fainstein, and G.R. Kotler: J. Appl. Phys., 1970, vol. 41, pp. 4404–10.10.1063/1.1658474 ↗
15. I.M. Lifshitz and V.V. Slyozov: J. Phys. Chem. Solids, 1961, vol. 19, pp. 35–51.10.1016/0022-3697(61)90054-3 ↗
16. C. Wagner: Zeit. Elektrochem., 1961, vol. 65, pp. 581–91.
17. A.J. Ardell: Acta Metall., 1972, vol. 20, pp. 61–71.10.1016/0001-6160(72)90114-9 ↗
18. A.D. Brailsford and P. Wynblatt: Acta Metall., 1979, vol. 27, pp. 489–97.10.1016/0001-6160(79)90041-5 ↗
19. P.W. Voorhees and M.E. Glicksman: Acta Metall., 1984, vol. 32, pp. 2001–11.10.1016/0001-6160(84)90180-9 ↗
20. P.W. Voorhees and M.E. Glicksman: Acta Metall., 1984, vol. 32, pp. 2013–30.10.1016/0001-6160(84)90181-0 ↗
21. H. A. Calderon, P.W. Voorhees, J.L. Murray, and G. Kostorz: Acta Metall. Mater., 1994, vol. 42, pp. 991–1000.10.1016/0956-7151(94)90293-3 ↗
22. A. Umantsev and G.B. Olson: Scripta. Metall. Mater., 1993, vol. 29, pp. 1135–40.10.1016/0956-716X(93)90191-T ↗
23. J.E. Morral and G.R. Purdy: Scripta. Metall. Mater., 1994, vol. 30, pp. 905–08.10.1016/0956-716X(94)90413-8 ↗
24. C.J. Kuehmann and P.W. Voorhees: Metall. Mater. Trans. A, 1996, vol. 27A, pp. 937–43.10.1007/BF02649761 ↗
25. H. Wendt and P. Haasen: Acta Metall., 1983, vol. 31, pp. 1649–59.10.1016/0001-6160(83)90163-3 ↗
26. S.Q. Xiao and P. Haasen: Acta Metall. Mater., 1991, vol. 39, pp. 651–59.10.1016/0956-7151(91)90133-L ↗
27. J.D. Robson, M.J. Jones, and P.B. Prangnell: Acta Mater., 2003, vol. 51, pp. 1453–68.10.1016/S1359-6454(02)00540-2 ↗
28. C.K. Sudbrack, K.E. Yoon, R.D. Noebe, and D.N. Seidman: Acta Mater., 2006, vol. 54, pp. 3199–210.10.1016/j.actamat.2006.03.015 ↗
29. C.K. Sudbrack, R.D. Noebe, and D.N. Seidman: Acta Mater., 2007, vol. 55, pp. 119–30.10.1016/j.actamat.2006.08.009 ↗
30. A.J. Langer and J.S. Schwartz: Phys. Rev. A, 1980, vol. 21, pp. 948–58.10.1103/PhysRevA.21.948 ↗
31. R. Wagner and R. Kampmann: in Materials Science and Technology, P. Haasen, ed., VCH, Weinheim, Germany, 1991, vol. 5, pp. 213–303.
32. L. Rougier, A. Jacot, C.A. Gandin, P. D. Napoli, P.Y. Thery, D. Ponsen, and V. Jaquet: Acta Mater., 2013, vol. 61, pp. 6396–6405.10.1016/j.actamat.2013.07.018 ↗
33. S.T. Wlodek, M. Kelly, and D.A. Alden: in Superalloys 1996, R.D. Kissinger, D.J. Deye, D.L. Anton, A.D. Cetel, M.V. Nathal, T.M. Pollock, and D.A. Woodford, eds., TMS, Warrendale, PA, 1996, pp. 129–36.10.7449/1996/Superalloys_1996_129_136 ↗
34. D.U. Furrer: DEng. Thesis, University of Ulm, Ulm, Germany, 1999.
35. D.U. Furrer and H.J. Fecht: Scripta Mater., 1999, vol. 40, pp. 1215–20.10.1016/S1359-6462(99)00094-9 ↗
36. T.P. Gabb, D.G. Backman, D.Y. Wei, D.P. Mourer, D.U. Furrer, A. Garg, and D.L. Ellis: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrandale, PA, 2000, pp. 405–14.10.7449/2000/Superalloys_2000_405_414 ↗
37. H.J. Jou, P.W. Voorhees, and G.B. Olson: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds., TMS, Warrendale, PA, 2004, pp. 877–86.10.7449/2004/Superalloys_2004_877_886 ↗
38. G.B. Olson, H.J. Jou, J. Jung, J.T. Sebastian, A. Misra, I. Locci, and D. Hull: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrandale, PA, 2008, pp. 923–32.10.7449/2008/Superalloys_2008_923_932 ↗
39. K. Wu, F. Zhang, S. Chen, W. Cao, and Y.A. Chang: in Superalloys 2008, R.C. Reed, K.A. Green, P. Caron, T.P. Gabb, M.G. Fahrmann, E.S. Huron, and S.A. Woodard, eds., TMS, Warrandale, PA, 2008, pp. 933–39.10.7449/2008/Superalloys_2008_933_939 ↗
40. C.E. Campbell, J.C. Zhao, and M.F. Henry: J. Phase Equilib. Diffus., 2004, vol. 25, pp. 6–15.10.1007/s11669-004-0167-9 ↗
41. J. Gayda, T.P. Gabb, and P.T. Kantzos: in Superalloys 2004, K.A. Green, T.M. Pollock, H. Harada, T.E. Howson, R.C. Reed, J.J. Schirra, and S. Walston, eds. TMS, Warrendale, PA, 2004, pp. 323–30.10.7449/2004/Superalloys_2004_323_329 ↗
42. J. Lemsky: Report NASA/CR-2005-213574, Ladish Company, Inc., Cudahy, WI, February 2005. http://gltrs.grc.nasa.gov.
43. S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2013, vol. 44A, pp. 2778–98.10.1007/s11661-013-1675-1 ↗
44. S.L. Semiatin, K. E. McClary, A.D. Rollett, C.G. Roberts, E.J. Payton, F. Zhang, and T.P. Gabb: Metall. Mater. Trans. A, 2012, vol. 43A, pp. 1649–61.10.1007/s11661-011-1035-y ↗
45. S.L. Semiatin, J.M. Shank, A.R. Shively, W.M. Saurber, E.F. Gaussa, and A.L. Pilchak: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 6231–51.10.1007/s11661-014-2572-y ↗
46. T.P. Gabb, A. Garg, J. Gayda, D. Johnson, E. Kang, I. Locci, R.A. MacKay, R. Rogers, C.K. Sudbrack, and S.L. Semiatin: Report NASA/TM-2014-12345, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 2014, in press.
47. E.E. Underwood: Quantitative Stereology, Addison Wesley, Reading, MA, 1970.
48. J.C. Russ and R.T. Dehoff: Practical Stereology, Kluwer Academic/Plenum Publishers, New York, 2000.10.1007/978-1-4615-1233-2 ↗
49. J.S. Tiley, A.R. Shiveley. P.A. Shade, J.C. Schuren, P.N. Fagin, and S.L. Semiatin: Unpublished research, Air Force Research Laboratory, 2014.
50. W.W. Mullins and R.F. Sekerka: J. Appl. Phys., 1964, vol. 35, pp. 444–51.10.1063/1.1713333 ↗
51. J. MacSleyne, M.D. Uchic, J.P. Simmons, and M. DeGraef: Acta Mater., 2009, vol. 57, pp. 6251–67.10.1016/j.actamat.2009.08.053 ↗
52. S.L. Semiatin: Unpublished research, Air Force Research Laboratory, Materials and Manufacturing Directorate, 2013.
53. L. Kampmann and M. Kahlweit: Berichte der Bunsen-Gesellschaft Physikalische Chemie, 1970, vol. 94, pp. 456–62.10.1002/bbpc.19700740508 ↗
54. M. Perez: Scripta Mater., 2005, vol. 52, pp. 709–12.10.1016/j.scriptamat.2004.12.026 ↗
55. O. Grong and H.R. Shercliff: Prog. Mater. Sci., 2002, vol. 47, pp. 163–282.10.1016/S0079-6425(00)00004-9 ↗
56. T.P. Gabb, J. Gayda, J. Telesman, and P.T. Kantzos: Report NASA/TM-2005-213645, National Aeronautics and Space Administration, Glenn Research Center, Cleveland, OH, 2005. http://gltrs.grc.nasa.gov.
57. E.J. Payton: PhD Dissertation, The Ohio State University, Columbus, OH, 2009.
58. F. Zhang: Unpublished research, CompuTherm LLC, Madison, WI, 2008.
59. W. Cao, S.-L. Chen, F. Zhang, K. Wu, Y. Yang, Y.A. Chang, R. Schmid-Fetzer, and W.A. Oates: CALPHAD, 2009, vol. 33, pp. 328–42.10.1016/j.calphad.2008.08.004 ↗
60. C. Booth-Morrison, J. Weninger, C.K. Sudbrack, Z. Mao, R.D. Noebe, and D.N. Seidman: Acta Mater. 2008, pp. 3422–38.10.1016/j.actamat.2008.03.016 ↗
61. J.W. Nesbitt and R.W. Heckel: Metall. Trans. A, 1987, vol. 18A, pp. 2061–73.10.1007/BF02647078 ↗
62. M.A. Dayananda: Mater. Sci. Eng. A, 1989, vol. A121, pp. 351–59.10.1016/0921-5093(89)90787-9 ↗
63. S.L. Semiatin, J.M. Shank, W.M. Saurber, A.L. Pilchak, D.L. Ballard, F. Zhang, and B. Gleeson: Metall. Mater. Trans. A, 2014, vol. 45A, pp. 962–79.10.1007/s11661-013-2005-3 ↗
64. M.S.A. Karunaratne, D.C. Cox, P. Carter, and R.C. Reed: in Superalloys 2000, T.M. Pollock, R.D. Kissinger, R.R. Bowman, K.A. Green, M. McLean, S. Olson, and J.J. Schirra, eds., TMS, Warrandale, PA, 2000, pp. 263–72.10.7449/2000/Superalloys_2000_263_272 ↗
65. S.L. Semiatin, T.M. Lehner, J.D. Miller, R.D. Doherty, and D.U. Furrer: Metall. Mater. Trans. A, 2007, vol. 38A, pp. 910–21.10.1007/s11661-007-9088-7 ↗