Microstructural Features of Austenite Formation in C35 and C45 alloys
Source abstract
Abstract
The microstructural evolution during continuous heating experiments has been studied for two C-Mn steels with carbon contents in the range 0.35 to 0.45 wt pct using optical microscopy, scanning electron microscopy (SEM), and electron probe microanalysis (EPMA). It is shown that the formation of the austenitic phase is possible in pearlite as well as in ferrite regions. Thus, a considerable overlap in time of ferrite-to-austenite and pearlite-to-austenite transformations is likely to occur. Another observation that was made during the experiments is that, depending on the heating rate, the pearlite-to-austenite transformation can proceed in either one or two steps. At low heating rates (0.05 °C/s), ferrite and cementite plates transform simultaneously. At higher heating rates (20 °C/s), it is a two-step process: first ferrite within pearlite grains transforms to austenite and then the dissolution of the cementite lamellae takes place. Several types of growth morphologies were observed during the experiments. The formation of a finger-type austenite morphology was noticed only for low and intermediate heating rates (0.05 °C/s and 20 °C/s), but not for the heating rate of 300 °C/s. The formation of this finger-type austenite occurs on pearlite-ferrite grain boundaries and coincides with the direction of cementite plates. The carbon inhomogeneities in the microstructure affect the formation of martensitic/bainitic structures on cooling.
Source: openalex_inverted_index · Quality: baseline
Research context
OpenAlex topics: Microstructure and Mechanical Properties of Steels · Welding Techniques and Residual Stresses · Hydrogen embrittlement and corrosion behaviors in metals
SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.
References (16)
Show source-provided references
1. G.R. Speich, V.A. Demarest, R.L. Miller: Metall. Trans. A, 1981, vol. 12A, pp. 1419–2810.1007/BF02643686 ↗
2. M. Hillert, K. Nilsson, L.E. Torndahl: J. Iron Steel Inst., London, 1971, vol. 209, pp. 49–66
3. S.K. Jayaswal, S.P. Gupta: Metallkd., 1992, vol. 83, pp. 809–19
4. C. Garcia de Andres, F.G. Caballero, C. Capdevila: Scripta Mater., 1998, vol. 38 (12), pp. 1835–4210.1016/S1359-6462(98)00131-6 ↗
5. V.I. Zel’dovich, I.V. Khomskaya, O.S. Rinkevich: Phys. Met. Metallogr., 1992, vol. 73 (3), pp. 250–65
6. N.C. Law, D.V. Edmonds: Metall. Mater. Trans. A, 1980, vol. 11A, pp. 33–4610.1007/BF02700436 ↗
7. J.W. Christian: The Theory of Transformations in Metals and Alloys, Pergamon, Amsterdam, The Netherlands, 2002, pp. 422–7910.1016/B978-008044019-4/50014-3 ↗
8. I.I. Novikov: Teoria Termicheskoi Obrabotki Metallov {Theory of Heat Treatment of Metals}, Metallurgia, Moskow, 1986, pp. 154–62
9. S. Saunders, P. Karduck, W.G. Sloof, Microchim. Acta, 2004, vol. 145, pp. 209–1310.1007/s00604-003-0155-5 ↗
10. J.T. Armstrong: in Electron Probe Quantitation, K.F.J. Heinrich, D.E. Newbury, eds., Plenum Press, New York, NY, 1991, pp. 261—31510.1007/978-1-4899-2617-3_15 ↗
11. G.A. Roberts and R.F. Mehl: Trans. ASM, 1943, Sept., pp. 613–50
12. G.R. Speich, A. Szirmae, M.J. Richards: Trans. TMS-AIME, 1969, vol. 245, pp. 1063–74
13. C.R. Brooks: Principles of the Austenitization of Steels, Elsevier Applied Science, London, 1992, pp. 81–144
14. A. Jacot, M. Rappaz, R.C. Reed: Acta Mater., 1998, vol. 46, pp. 3949–6210.1016/S1359-6454(98)00048-2 ↗
15. L.E. Samuels: Optical Microscopy of Carbon Steels, ASM, Metals Park, OH, 1980, pp. 101–498
16. D.A. Porter, K.E. Easterling: Phase Transformations in Metals and Alloys, 2nd ed., Nelson Thornes Ltd., Cheltenham, United Kingdom, 2001, pp. 171–80