journal article·2015-12

Thermodynamics-Based Selection and Design of Creep-Resistant Cast Mg Alloys

Saeideh Abaspour, Carlos H. Cáceres

Publisher page

Abstract

Atomic level thermodynamics arguments that account for the generally weak age hardening response while suggesting that extending the athermal regime through short-range order (SRO) is a most feasible path to increasing the creep strength of many current alloys are presented. The tendency, or otherwise, of many solutes to develop SRO in dilute solid solutions rationalizes a number of observations in current multicomponent Mg alloys, and in particular the retention of linear strain hardening at high temperatures, while it disputes the viability of several micromechanisms often considered active, such as pinning of edge dislocations by mobile solute clouds, dynamic precipitation of thermally stable precipitates, or atomic size effects on the diffusivity. Potential solutes are sorted out and ranked based on the sign and value of the enthalpy of mixing of binary solid solutions using the Miedema phenomenological scheme. Due to their large negative energy of mixing and reasonable solubility (>1 at. pct) at ~473 K (~200 °C), Y and Gd appear as the best candidates to increase the creep strength through SRO, followed by Nd and Ca, in close agreement with data reported in the literature. The feasibility of enhancing the age hardening response through homogeneously nucleated, coherent precipitates, in some cases despite the negative energy of mixing of the alloy, or via internally ordered precipitates mimicking those present in Mg-Th alloys is considered by making parallels with the Al-Zn and the Al-Cu alloy systems. The possible optimization of the strengthening of high pressure die cast alloys combining SRO and intergranular eutectics or of heat-treatable cast alloys through internally ordered precipitates and SRO is discussed.
Source: openaire · Quality: candidate unverified · Source record ↗

Research context

OpenAlex topics: Magnesium Alloys: Properties and Applications · Aluminum Alloys Composites Properties · Aluminum Alloy Microstructure Properties

SciVX discovery tags are terminology-based. OpenAlex topics are source-provided classifications.

References (100+)

Show source-provided references
1. K. Maruyama, M. Suzuki, and S. Hiroyuki, Metallurgical and Materials Transactions A, 33A (2002) 875-882.10.1007/s11661-002-0157-7 ↗
2. L. Sturkey, J.B. Clark, Journal of the Institute of Metals, 88 (1959) 177-181.
3. J.B. Clark, Acta Metallurgica, 13 (1965) 1281-1289.10.1016/0001-6160(65)90039-8 ↗
4. J.B. Clark, Transactions of Japan Institute of Metals, 9 Supplement (1968) 354-355.
5. J. van der Planken, A. Deruyttere, Acta Metallurgica, 17 (1969) 451-454.10.1016/0001-6160(69)90026-1 ↗
6. G. Mima, Y. Tanaka, Transactions of Japan Institute of Metals, 12 (1971) 323-328.10.2320/matertrans1960.12.323 ↗
7. C. Bettles, M. Gibson, Advanced Engineering Materials, 5 (2003) 859-865. http://dx.doi.org/10.1002/adem.20031010310.1002/adem.200310103 ↗
8. Z. Yang, J.P. Li, J.X. Zhang, G.W. Lorimer, J. Robson, Acta Metallurgica Sinica (English Letters), 21 (2008) 313-328.10.1016/S1006-7191(08)60054-X ↗
9. L.Y. Wei, G.L. Dunlop, H. Westengen, Metallurgical and Materials Transactions A, 26A (1995) 1705-1716.10.1007/BF02670757 ↗
10. R. Wilson, C. Bettles, B.C. Muddle, J.F. Nie, Materials Science Forum, 419 (2003) 267-272.10.4028/www.scientific.net/MSF.419-422.267 ↗
11. B. Smola, I. Stulıková, F. Von Buch, B. Mordike, Materials Science and Engineering A, 324 (2002) 113-117. http://dx.doi.org/10.1016/S0921-5093(01)01291-610.1016/S0921-5093(01)01291-6 ↗
12. B.L. Mordike, Materials Science and Engineering A, 324 (2002) 103-112. http://dx.doi.org/10.1016/S0921-5093(01)01290-410.1016/S0921-5093(01)01290-4 ↗
13. J.-F. Nie, Metallurgical and Materials Transactions A, 43 (2012) 3891-3939.10.1007/s11661-012-1217-2 ↗
14. R. De Luca, J.G. Byrne, Acta Metallurgica, 13 (1965) 1187-1195.10.1016/0001-6160(65)90056-8 ↗
15. C.R. Hutchinson, J.F. Nie, S. Gorsse, Metallurgical and Materials Transactions A, 36 (2005) 2093-2105.10.1007/s11661-005-0330-x ↗
16. M. Pekguleryuz, M. Celikin, International Materials Reviews, 55 (2010) 197-217. http://dx.doi.org/10.1179/095066010X1264689872832710.1179/095066010X12646898728327 ↗
17. L.B. Duffy, Foundry Trade Journal, 165 (1991) 319-321.
18. C.H. Cáceres, D.M. Rovera, Journal of Light Metals, 1/3 (2001) 151-156.10.1016/S1471-5317(01)00008-6 ↗
19. R. Khosrhoshahi: in Proceedings of the Third International Magnesium Conference, G.W. Lorimer ed., Manchester, 1996, pp. 241–56
20. I.J. Polmear, Light Alloys,3rd ed., Edward Arnold, London, 1995, pp. 223-227.
21. S. Zhu, M.A. Easton, T.B. Abbott, J.-F. Nie, M.S. Dargusch, N. Hort, and M.A. Gibson: Metall. Mater. Trans. A, 2015, 1–12. DOI:10.1007/s11661-015-2946-910.1007/s11661-015-2946-9 ↗
22. C.R. Hutchinson, S.P. Ringer, Metallurgical and Materials Transactions A, 31 (2000) 2721-2733.10.1007/BF02830331 ↗
23. I. Polmear, Materials Forum, 28 (2004) 1-14.
24. K.E. Nelson, Transactions of the American Foundrymen’s Society, 67 (1959) 610-613.
25. Q. Han, B.K. Kad, S. Viswanathan, Philosophical Magazine, 84 (2004) 3843-3860.10.1080/14786430412331283073 ↗
26. A.R. Miedema, F.R. de Boer, R. Boom, Calphad, 1 (1977) 341-359. http://dx.doi.org/10.1016/0364-5916(77)90011-610.1016/0364-5916(77)90011-6 ↗
27. F.R. de Boer, R. Boom, W.C.M. Mattens, A.R. Miedema, A.K. Niessen, Cohesion in Metals: Transition Metal Alloys, North-Holland, Amsterdam, 1989.
28. A.R. Miedema, Journal of the Less Common Metals, 32 (1973) 117-136. 10.1016/0022-5088(73)90078-710.1016/0022-5088(73)90078-7 ↗
29. A.R. Miedema, R. Boom, F.R. De Boer, Journal of the Less Common Metals, 41 (1975) 283-298. http://dx.doi.org/10.1016/0022-5088(75)90034-x10.1016/0022-5088(75)90034-X ↗
30. S. Abaspour and C. Cáceres: Metall. Mater. Trans. A, 2015. DOI:10.1007/s11661-015-3128-5.10.1007/s11661-015-3128-5 ↗
31. C.H. Cáceres, A. Blake, Physica Status Solidi, 194 (2002) 147-158.10.1002/1521-396X(200211)194:1<147::AID-PSSA147>3.0.CO;2-L ↗
32. L. Gao, R.S. Chen, E.H. Han, Journal of Alloys and Compounds, 481 (2009) 379-384. http://dx.doi.org/10.1016/j.jallcom.2009.02.13110.1016/j.jallcom.2009.02.131 ↗
33. L. Gao, R.S. Chen, E.H. Han, Journal of Alloys and Compounds, 472 (2009) 234-240.10.1016/j.jallcom.2008.04.049 ↗
34. B.Q. Shi, R.S. Chen, W. Ke, Journal of Alloys and Compounds, 509 (2011) 3357-3362.10.1016/j.jallcom.2010.12.065 ↗
35. T. Hassel, F. Bach, and C. Krause: in Proceeding of the 7th International Conference on Mg Alloys & Their Applications, K.U. Kainer, ed., Dresden, 2007, pp. 789–95.
36. S. Miura, S. Imagawa, T. Toyoda, K. Ohkubo, T. Mohri, Materials Transactions, 49 (2008) 952-956.10.2320/matertrans.MC2007109 ↗
37. I. Toda-Caraballo, E.I. Galindo-Nava, P.E.J. Rivera-Díaz-del-Castillo, Acta Materialia, 75 (2014) 287-296.10.1016/j.actamat.2014.04.064 ↗
38. K. Chen, K. Boyle, Metallurgical and Materials Transactions A, 40 (2009) 2751-2760. http://dx.doi.org/10.1007/s11661-009-9954-610.1007/s11661-009-9954-6 ↗
39. J. Nie, K. Oh-Ishi, X. Gao, K. Hono, Acta Materialia, 56 (2008) 6061-6076.10.1016/j.actamat.2008.08.025 ↗
40. P. Haasen: Physical Metallurgy, Cambridge University Press, Cambridge, 1996, Chapter 4 and 510.1017/CBO9781107295551 ↗
41. D.S. Gencheva, A.A. Katsnel’son, L.L. Rokhlin, V.M. Silonov, F.A. Khavadzha, Fiz. metal. metalloved., 51 (1981) 788-793.
42. S. Henes, V. Gerold, Zeitschrift fur Metallkunde, 53 (1962) 703-08.
43. V.M. Silonov, E.V. Evlyukhina, L.L. Rokhlin, Russian Physics Journal, 39 (1996) 622-625.10.1007/BF02439089 ↗
44. L.A. Safronova, A.A. Katsnel’son, S.V. Sveshnikov, Y.M. L’Vov, Fiz. metal. metalloved., 43 (1977) 76-80.
45. N. Jha, A.K. Mishra, Journal of Alloys and Compounds, 329 (2001) 224-229.10.1016/S0925-8388(01)01684-X ↗
46. A. Boos, S. Steeb, Physics Letters A, 63 (1977) 333-334. http://dx.doi.org/10.1016/0375-9601(77)90921-510.1016/0375-9601(77)90921-5 ↗
47. M. Nishijima, K. Hiraga, Materials Transactions, 48 (2007) 10-15.10.2320/matertrans.48.10 ↗
48. C.H. Caceres, G.E. Mann, J.R. Griffiths, Metallurgical and Materials Transactions A, 42 (2011) 1950-1959. http://dx.doi.org/10.1007/s11661-010-0599-210.1007/s11661-010-0599-2 ↗
49. S. Sandlöbes, Z. Pei, M. Friák, L.F. Zhu, F. Wang, S. Zaefferer, D. Raabe, J. Neugebauer, Acta Materialia, 70 (2014) 92-104.10.1016/j.actamat.2014.02.011 ↗
50. A. Akhtar, E. Teghtsoonian, Materials Transactions (JIM), 9, supplement (1968) 692-697.
51. A. Akhtar, E. Teghtsoonian, Acta Metallurgica, 17 (1969) 1339-1349.10.1016/0001-6160(69)90151-5 ↗
52. A. Akhtar, E. Teghtsoonian, Acta Metallurgica, 17 (1969) 1351-1356.10.1016/0001-6160(69)90152-7 ↗
53. A. Akhtar, E. Teghtsoonian, Philosophical Magazine, 25 (1972) 897-916.10.1080/14786437208229311 ↗
54. K. Yang, C. Cáceres, M. Easton, Metallurgical and Materials Transactions A, 45 (2014) 4117-4128. http://dx.doi.org/10.1007/s11661-014-2326-x10.1007/s11661-014-2326-x ↗
55. N. Stanford, Materials Science and Engineering A, 528 (2010) 314-322.10.1016/j.msea.2010.08.097 ↗
56. M. Salahshoor, Y. Guo, Materials, 5 (2012) 135.10.3390/ma5010135 ↗
57. J.B. Clark, Acta Metallurgica, 16 (1968) 141-152.10.1016/0001-6160(68)90109-0 ↗
58. J.F. Nie, B.C. Muddle: in Materials 98, Institute of Materials Engineering Australasia, Melbourne, M. Ferry ed., 1998, pp. 567-571.
59. J.W. Martin, Micromechanisms in particle hardened alloys, Cambridge University Press, Cambridge, 1980, pp.50-64.
60. C. Wolverton, Philosophical Magazine Letters, 79 (1999) 683-690.10.1080/095008399176724 ↗
61. C. Mendis, C. Bettles, M. Gibson, S. Gorsse, C. Hutchinson, Philosophical Magazine Letters, 86 (2006) 443-456.10.1080/09500830600871186 ↗
62. C.L. Mendis, C.J. Bettles, M.A. Gibson, C.R. Hutchinson, Materials Science & Engineering A, 435 (2006) 163-171.10.1016/j.msea.2006.07.090 ↗
63. H. Liu, Y. Chen, Y. Tang, S. Wei, G. Niu, Journal of Alloys and Compounds, 440 (2007) 122-126.10.1016/j.jallcom.2006.09.024 ↗
64. F.R. Elsayed, T.T. Sasaki, C.L. Mendis, T. Ohkubo, K. Hono, Materials Science and Engineering: A, 566 (2013) 22-29. http://dx.doi.org/10.1016/j.msea.2012.12.04110.1016/j.msea.2012.12.041 ↗
65. M.X. Zhang, P.M. Kelly, Acta Materialia, 53 (2005) 1085-1096.10.1016/j.actamat.2004.11.005 ↗
66. N. Balasubramani, A. Srinivasan, U.T.S. Pillai, B.C. Pai, Materials Science and Engineering: A, 457 (2007) 275-281. http://dx.doi.org/10.1016/j.msea.2006.12.13210.1016/j.msea.2006.12.132 ↗
67. A. Srinivasan, U.T.S. Pillai, B.C. Pai, Materials Science and Engineering A, 527 (2010) 6543-6550. http://dx.doi.org/10.1016/j.msea.2010.07.02010.1016/j.msea.2010.07.020 ↗
68. A. Srinivasan, J. Swaminathan, M.K. Gunjan, U.T.S. Pillai, B.C. Pai, Materials Science and Engineering A, 527 (2010) 1395-1403. http://dx.doi.org/10.1016/j.msea.2009.10.00810.1016/j.msea.2009.10.008 ↗
69. G. Feng and H. Yu: International Conference on Electronic and Mechanical Engineering and Information Technology (EMEIT), IEEE, Harbin, Heilongjiang, 2011, pp. 4763–65
70. T.J. Pike, B. Noble, Journal of the Less Common Metals, 30 (1973) 63-74. http://dx.doi.org/10.1016/0022-5088(73)90007-610.1016/0022-5088(73)90007-6 ↗
71. K. Máthis, J. Gubicza, N.H. Nam, Journal of Alloys and Compounds, 394 (2005) 194-199. http://dx.doi.org/10.1016/j.jallcom.2004.10.05010.1016/j.jallcom.2004.10.050 ↗
72. A.A. Luo: in Magnesium Technology, H.I. Kaplan, ed., TMS, Seattle, 2002, pp. 42–4810.1007/BF02701073 ↗
73. M.S. Dargusch, G.L. Dunlop, A.L. Bowles, K. Pettersen, P. Bakke, Metallurgical and Materials Transactions A, 35 (2004) 1905-1909.10.1007/s11661-004-0099-3 ↗
74. Y. Guangyin, S. Yangshan, Z. Weiming, Journal of Materials Science Letters, 18 (1999) 2055-2057.10.1023/A:1006770924705 ↗
75. S.L. Couling: Metals Engineering Quarterly, (1972), pp. 7–13.
76. G.S. Foerster: Metals Engineering Quarterly, (1973), pp. 19–22.
77. I.A. Anyanwu, S. Kamado, Y. Kojima, Materials Transactions, 42 (2001) 1212-1218.10.2320/matertrans.42.1212 ↗
78. A. Luo, Materials Science Forum, 419-422 (2003) 57-66.10.4028/www.scientific.net/MSF.419-422.57 ↗
79. M.O. Pekguleryuz, A.A. Kaya, Advanced Engineering Materials, 5 (2003) 866-878.10.1002/adem.200300403 ↗
80. B. Mordike, I. Stulikova, B. Smola, Metallurgical and Materials Transactions A, 36 (2005) 1729-1736. http://dx.doi.org/10.1007/s11661-005-0037-z10.1007/s11661-005-0037-z ↗
81. B. Smola, I. Stulíková, J. Pelcová, B.L. Mordike: in Proceedings of the 6th International Conference-Magnesium Alloys and Their Applications, K.U. Kainer, ed., Wiley, Wolfsburg, 2006, pp. 43–4810.1002/3527603565.ch7 ↗
82. M.A. Gibson, X. Fang, C.J. Bettles, C.R. Hutchinson, Scripta Materialia, 63 (2010) 899-902. http://dx.doi.org/10.1016/j.scriptamat.2010.07.00210.1016/j.scriptamat.2010.07.002 ↗
83. J.R. Terbush, N.D. Saddock, J.W. Jones, T.M. Pollock, Metallurgical and Materials Transactions A, 41 (2010) 2435-2442.10.1007/s11661-010-0271-x ↗
84. S.W. Chung, H. Watanabe, W.-J. Kim, K. Higashi, Materials Transactions, 45 (2004) 1266-1271.10.2320/matertrans.45.1266 ↗
85. L. Moreno, T. Nandy, J. Jones, J. Allison, T. Pollock: in Magnesium Technology, H.I. Kaplan, ed., TMS, 2002, pp. 111–16.
86. Y. Zhang, L. Yang, J. Dai, J. Ge, G. Guo, and Z. Liu: Mater. Design, 63 (2014) 439-445. doi:10.1016/j.matdes.2014.06.02710.1016/j.matdes.2014.06.027 ↗
87. F. Czerwinski (2008) Magnesium Injection Molding, Springer, New York Inc, 2008.10.1007/978-0-387-72528-4 ↗
88. G. Nayyeri, R. Mahmudi, F. Salehi (2010) Mater. Sci. Eng. A 527: 5353-5359. doi:10.1016/j.msea.2010.05.04010.1016/j.msea.2010.05.040 ↗
89. R. Alizadeh, R. Mahmudi, Journal of Alloys and Compounds, 509 (2011) 9195-9199.10.1016/j.jallcom.2011.06.109 ↗
90. J. Bai, Y. Sun, F. Xue, S. Xue, J. Qiang, T. Zhu, Journal of Alloys and Compounds, 437 (2007) 247-253.10.1016/j.jallcom.2006.07.096 ↗
91. B.-G. Moon, B.-S. You, Y.-D. Hahn, Current Nanoscience, 10 (2014) 108-113.10.2174/1573413709666131108234307 ↗
92. S.M. Zhu, M.A. Gibson, M.A. Easton, J.F. Nie, Scripta Materialia, 63 (2010) 698-703.10.1016/j.scriptamat.2010.02.005 ↗
93. W. Xu, Y. Zhang, J. TerBush, L.-M. Peng, W.-J. Ding, J.-F. Nie, Metallurgical and Materials Transactions A, 45 (2014) 4103-4116. http://dx.doi.org/10.1007/s11661-014-2335-910.1007/s11661-014-2335-9 ↗
94. M. Lentz, M. Klaus, R. Coelho, N. Schaefer, F. Schmack, W. Reimers, B. Clausen, Metallurgical and Materials Transactions A, 45 (2014) 5721-5735.10.1007/s11661-014-2533-5 ↗
95. M. Suzuki, H. Sato, K. Maruyama, H. Oikawa, Materials Science and Engineering A, 252 (1998) 248-255.10.1016/S0921-5093(98)00662-5 ↗
96. W.P. Sun, J.J. Jonas, Acta Metallurgica et Materialia, 42 (1994) 283-92.10.1016/0956-7151(94)90070-1 ↗
97. S.M. Zhu, M.A. Gibson, J.F. Nie, M.A. Easton, T.B. Abbott, Scripta Materialia, 58 (2008) 477-480. http://dx.doi.org/10.1016/j.scriptamat.2007.10.04110.1016/j.scriptamat.2007.10.041 ↗
98. L. Gao, R. Chen, and E. Han: in Magnesium Technology, S.R. Agnew, E.A. Nyberg, N.R. Neelameggham and M.O. Pekguleryuz, eds., TMS, San Francisco, 2009, pp. 269–72
99. D. Choudhuri, D. Jaeger, M.A. Gibson, R. Banerjee, Scripta Materialia, 86 (2014) 32-35.10.1016/j.scriptamat.2014.04.026 ↗
100. C. Wang, Y. Xu, and E. Han: J. Metall., 2012. DOI:10.1155/2012/67457310.1155/2012/674573 ↗